eldo_user

Simulator Compatibility
Options in Compat Mode
.TRAN INCR1 T1 [{INCRn Tn}] [TSTART=val] [UIC]
See the “.TRAN command” in the Eldo Reference Manual.
Related Topics
HSPICE Compatibility
Options in Compat Mode
Some options have different behavior in HSPICE compatibility mode.
• ACDERFUNC
This option is automatically unset in compat mode.
• ACM
This option is automatically set in compat mode.
• ACOUT=VAL
ACOUT defaults to 1.
1 — Vx(a,b) or Ix(a,b) are computed from the complex value Vx(a,0)-Vx(b,0) or from
Ix(a,0)-Ix(b,0).
• DEFPTNOM
This option is automatically set in compat mode. Enables a parameter to be defined with
the name TNOM. In such a case, this value will be used inside parameter expressions,
instead of the default TNOM or the value set using option TNOM=val.
• ICDC and ICDEV
These options are automatically set in compat mode. This means that IC specifications
given on devices are taken into account for the DC which is performed prior to TRAN.
When -compat is not set, and neither are the ICDC and ICDEV options, then IC
specifications given on devices are ignored, unless the UIC keyword is specified on the
.TRAN card.
• GENK
This option is automatically set in compat mode. It forces Eldo to generate second order
mutual inductors. It is used together with the KLIM option.
• (NO)KWSCALE
This option is automatically set in compat mode. Therefore, SCALE is not treated as a
keyword and can be used as a parameter.
• LIBINC
172
Eldo® User's Manual, 15.3