eldo_user

Eldo Conversion Utilities
Utility to Convert a Waveform Database
• -cvt_group_size value
Applies to FSDB format only. Specifies the number of waveforms to load simultaneously in
-cvt_mode GROUP mode.
• -cvt_stat
Applies to FSDB format only. Displays statistical information about file content. For
example:
Statistical information about data read so far :
------------------------------------------------
simulator version: ELDO 15.1 (64 bits)
number of unsupported waveforms: 0
number of waveforms: 5
analog: 5
digital: 0
bus: 0 (for a total of 0 bits)
number of aliases: 0
number of files: 1
number of nodes in the hierarchy: 1
• -cvt_selection_list filename
Applies to FSDB format only. Provides a list of waveforms to extract from the input file,
one waveform name per line. Wildcards are not supported. Waveform names are casesensitive.
They follow FSDB syntax, the hierarchy comes before the signal name, for
example:
/top/x1/V(input)
The hierarchy separator can be specified inside the file using syntax:
#hierarchy_separator
where character is the hierarchical separator (default is /).
Example conversion notes:
Conversion note: 4 signal references have been identified in file
my.list.txt
Conversion note: 2 waveforms matching selection list were loaded
from FSDB file.
• -cvt_untyped VOLTAGE | CURRENT
Applies to WDB and STIMULI output only. Defines the default type which must be
assigned to untyped waveforms such as VHDL-AMS real signals.
• -cvt_trise value
Applies to STIMULI output only. Specifies the rise time applied to edges encountered while
converting digital-like waveforms, such as VHDL-AMS real signals, into analog waveforms
(default is 1.0e-12 seconds).
Eldo® User's Manual, 15.3 1475