eldo_user

Error and Warning Messages
Miscellaneous Warnings
Warning
Number
Table A-16. Miscellaneous Warnings (cont.)
Description
Warning 1530 COMMAND .MPRUN: host %s is ignored. It does not exist or it does not
allow remote connections
Warning 1531 COMMAND %s: Unable to parse expression %s
Warning 1532 COMMAND "%s": Incorrect output syntax for device %s
Warning 1533 .OPTION %s: Incorrect value %s. INDEX or XAXIS is expected
Warning 1534 COMMAND .MPRUN: FLAT method is disabled. It can only be used with
.alter
Warning 1535 %s output is not available
Warning 1536 COMMAND %s: No output specified. Default output %s is used
Warning 1537 COMMAND %s: More than one %s value specified. Previous value for %s
superseded by the last value specified
Warning 1538 COMMAND %s: Stress vector element is out-of-range. Command is ignored
Warning 1539 COMMAND .MC: PRINT_EXTRACT keyword is disabled when NONOM
or ALL is used. All extract values are printed by default
Warning 1540 COMMAND .EXTRACT: MC extract type can only be used with Monte-
Carlo statistical functions such as MCAVG, MCMIN, etc. Command is
ignored
Warning 1541 COMMAND .PRINTFILE: analysis set to %s
Warning 1542 COMMAND .AGE MODE=BLOCKLOAD: stress values have been loaded
for all devices affected by the reliability analysis. Since no new stress values
need to be calculated, MODE=LOAD is assumed
Warning 1543 COMMAND .DSPF_INCLUDE %s: No X instance found in the circuit
matching instance specification specified on the command
Warning 1544 COMMAND .RESTART: %s specification is not available inside Questa
ADMS
Warning 1545 COMMAND %s: SWEEP type indicates that the following output
specifications are measurement results. %s is not a known .EXTRACT or
.MEAS label
Warning 1546 COMMAND .MPRUN: This command is ignored since it has already been
specified
Warning 1547 DSPF: line %ld, device %s: no pin named %s found in pin list of SUBCKT
%s
Warning 1548 Unable to print/plot/extract lv9( ) when .op_display is used with vth_mask=0
and vtmod=1 or 2
1446
Eldo® User's Manual, 15.3