eldo_user

Warning
Number
Table A-16. Miscellaneous Warnings (cont.)
Description
Error and Warning Messages
Miscellaneous Warnings
Warning 1506 %sDSPF: node %s was not found in instance %s. Therefore, no DSPF added
on that node
Warning 1507 DSPF: node %s was not found. Therefore, no DSPF added on that node
Warning 1508 DSPF: Syntax error at line %ld (no pin %s) or object %s can not be handled
Warning 1509 DSPF: No DSPF added on node %s
Warning 1510 DSPF: Node %s is still connected ! This might indicate a problem in DSPF
since this node should be replaced by a network
Warning 1511 DSPF: No inductor %s found for K %s
Warning 1512 DSPF: Unable to open include file %s
Warning 1513 DSPF: subckt %s unknown PORT %s. DSPF ignored on that SUBCKT
Warning 1514 DSPF: subckt %s: unconsistent number of pins. %ld pins found in DSPF, %ld
expected. DSPF ignored on that SUBCKT
Warning 1515 DSPF: subckt %s not defined in pre-layout
Warning 1516 DSPF: nesting error at line %ld
Warning 1517 DSPF: syntax error at line %ld
Warning 1518 DSPF: instructions at line %d ignored
Warning 1519 DSPF: Unable to find DSPF file %s
Warning 1520
Warning 1521 EXTRACT MODE: Any new binary data will be written to %s to avoid a
conflict with an input file
Warning 1522 Missing index extension on %s
Warning 1523 Device %s: mismatch in parameter %s != %s. First value taken
Warning 1524 Device %s: mismatch in parameter with respect to nominal values on %s.
Nominal values taken
Warning 1525 %s statement ignored on %s when DEV parameter on .DSPF_INCLUDE is
of type DSPF
Warning 1526 COMMAND %s: Unknown output type: %s. Following specifications are
ignored
Warning 1527 COMMAND %s: Unknown analysis type: %s. This command is ignored
Warning 1528 COMMAND .AGE: Unable to access parameter %s
Warning 1529 COMMAND .AGE: Unable to access parameter %s in subckt %s. The update
of parameters for this subckt has not been enabled in the initialization method
Eldo® User's Manual, 15.3 1445