eldo_user

Error and Warning Messages
Miscellaneous Warnings
Warning
Number
Table A-16. Miscellaneous Warnings (cont.)
Description
Warning 1487 COMMAND .PRINTFILE: xaxis START and STOP values%s are lower
than TSTART given on .TRAN command. The command is ignored
Warning 1488 COMMAND %s: Unexpected argument %s inside %s
Warning 1489 Model level %d does not support UDRM. The .AGE command is disabled
Warning 1490 Model level %d does not support UDRM while model level %d does. The
.AGE command is disabled to avoid incorrect results
Warning 1491 COMMAND .OPTION OPSELDO_ALTER is only active when SQP
method is used
Warning 1492 COMMAND %s: keywords MASK and EXCEPT can only be applied to
generic output specifications or to output specifications which contain
wildcards
Warning 1493 COMMAND "%s": Command is ignored because the requested analysis is
not compatible with the analysis defined on .defwave %s
Warning 1494 COMMAND .EXTRACT %s XTHRES/XUP/XDOWN threshold parameter
expected a scalar instead of a waveform. DC value of the waveform is used.
Use XYCOND if you want to detect intersection of 2 waveforms
Warning 1495 COMMAND %s : %s expected after keyword %s. default is %s
Warning 1496 COMMAND .AGE: Unable to update parameter %s
Warning 1497 COMMAND .AGE: Analysis disabled. Accessing crypted parameters is not
allowed unless:
1/ command .SETKEY is crypted with the .PARAM
2/ command .USEKEY must be given in the netlist using the encrypted
models
Warning 1498 W() can only reference one wave name or one wave expression. So, writing
W(xx,yy) is not allowed
Warning 1499 COMMAND %s is ignored: complex waveforms are not supported
Warning 1500
Warning 1501 No DSPF on node %s because at least one object of a different hierarchy level
is connected to it using full pathname
Warning 1502 No DSPF on node %s
Warning 1503 DSPF command %s. Probably missing a *|NET instruction
Warning 1504 DSPF: Cannot find object %s
Warning 1505 DSPF: %s
1444
Eldo® User's Manual, 15.3