eldo_user

Error and Warning Messages
Miscellaneous Warnings
Warning
Number
Table A-16. Miscellaneous Warnings (cont.)
Description
Warning 1412 COMMAND .OBJECTIVE %s:
MONIT_VAL=ERRMEAN|ERRMIN|ERRMAX has no meaning with
GOAL=MINIMIZE|MAXIMIZE. This statement is ignored
Warning 1413 COMMAND .DATA %s: Wrong number of column in file %s at line %ld
Warning 1414 COMMAND .DATA %s: Wrong number of lines in file %s
Warning 1415 .OPTION TEMP_UNIT: Incorrect unit %s. KELVIN or CELSIUS is
expected
Warning 1416 COMMAND .MC OUTER does not apply on .TEMP command. Consider
using .STEP TEMP LIST if an inner sweep of temperature is required
Warning 1417 COMMAND .MC: keyword OUTER is disabled. It can't be applied with
.AGE analysis
Warning 1418 Not enough points were stored to compute FFT
Warning 1419 Unable to compute a correct FFT since FFT stop time has not been reached
Warning 1420 COMMAND .STEP LIB %s. Variant %s not found. Model descriptions and
parameter values are unchanged
Warning 1421 COMMAND .STEP LIB %s. Nothing to update. Model descriptions and
parameter values are unchanged
Warning 1422 COMMAND "%s": Unexpected keyword %s
Warning 1423 COMMAND "%s": INITFILE is missing
Warning 1424 COMMAND "%s": DEFAULTINIT=NO is set but no replacement file has
been specified. Simulation may fail
Warning 1425 COMMAND "%s": Ignored: Only active with .tran, .ac or .dc sweep analyses
Warning 1426 COMMAND "%s": unable to detect any multiple run commands compatible
with distributed simulations. This command is ignored
Warning 1427 COMMAND "%s": Ignored: Only one license is allowed and is already in use
Warning 1428 COMMAND "%s": Ignored: Cannot distribute jobs (no active hosts)
Warning 1429 COMMAND "%s": Ignored: Cannot distribute jobs (there must be at least 3
runs)
Warning 1430 COMMAND "%s": Unknown keyword: %s. TRISE or TFALL is expected
Warning 1431 COMMAND ".OPTION %s": Option is ignored. Syntax is: MIXEDSTEP =
[LOCKED | FREE]
Warning 1432 COMMAND ".OPTION %s": Unknown option or unexpected parameter
type. .OPTION %s Ignored
1440
Eldo® User's Manual, 15.3