eldo_user

Error and Warning Messages
Miscellaneous Warnings
Warning
Number
Warning 1037
Warning 1038
Warning 1039
Warning 1040
Warning 1041
Warning 1042
Warning 1043
Warning 1044
Warning 1045
Warning 1046
Warning 1047
Warning 1048
Warning 1049
Warning 1050
Warning 1051
Warning 1052
Warning 1053
Warning 1054
Warning 1055
Table A-16. Miscellaneous Warnings (cont.)
Description
Standard Eldo Mach commands ignored in Eldo Mach Black-Box mode
Command .EXTRACT OPMODE on name: name is not a valid keyword.
COMMAND .STEP: keyword (AUTOINCR) is ignored. It can only be
applied on .STEP PARAM syntax.
COMMAND .MC: keyword OUTER is disabled. No multi-run analysis has
been specified.
COMMAND .PRINT or .PLOT SSTJITTER: Expected SSTJITTER output,
and not name
COMMAND .PRINT or .PLOT SSTSTABIL: Expected SSTSTABIL output,
and not name
COMMAND .PRINT or .PLOT: output name will be written as real/
imaginary parts in files which do not support complex format.
COMMAND .EXTRACT or .MEAS: Unexpected name output
COMMAND .PRINTFILE: Element name not declared
COMMAND .DSPF_INCLUDE: file name. An extra X has been added on
name. That rule of adding an extra X will now be used by default in that file
for all subsequent *|NET instructions.
BUS name is of size 0: Could be declaration of that bus is missing.
.OPTION name: list of values are limited to 10 elements.
COMMAND .OPTWIND name is incompatible with options defined as a list
of values. Only first value is kept.
COMMAND name:Node name not found
COMMAND name:Device name not found
Object name: Eldo will simulate as if CTYPE = 1 had been set on that
instance... This is because C value seems not to be dependant on the pin bias,
or pins are connected to power supply or ground, and in such situations,
CTYPE = 1 mode is usually more appropriate.. However, in case this tuning
is here not appropriate, just set CTYPE = 0 on the device, or use .OPTION
NOAUTOCTYPE in order to disable this setup.
COMMAND .EXTRACT: name is ignored.
COMMAND .FOUR: name removed
COMMAND .MC: incorrect value for PRINT_EXTRACT. name found
while only NOMINAL, NOMLAST, ALL and numbers are allowed
1436
Eldo® User's Manual, 15.3