eldo_user

Warning
Number
Table A-16. Miscellaneous Warnings (cont.)
Description
Error and Warning Messages
Miscellaneous Warnings
Warning 1009 .OPTION: Incorrect range for name
Warning 1010 .PRINT or .PLOT: AC-like output name for non-AC analysis
Warning 1011 .PRINT or .PLOT: Unexpected AC output name
Warning 1012 .PLOT element name is not declared
Warning 1013 .PROBE/.SAVE element name is not declared
Warning 1014 .VIEW element name is not declared
Warning 1015 Element name is not found
Warning 1016 .SOLVE: Previous specifications superseded
Warning 1017 AC input sources used in connection with FPORT
Warning 1018 Digital gates are not handled in DCSWEEP
Warning 1019 .WC and .MC cannot be used together: .WC ignored
Warning 1020 .PZ analysis might give unexpected results because several AC sources are
found in the circuit
Warning 1021 .PRINT or .PLOT: Unexpected AC output name for SST
Warning 1022 .PRINT or .PLOT: Only V() or I() is allowed for SST type
Warning 1023 .TDEV: Object name not found
Warning 1024 .PLOT element name not declared
Warning 1025 .PRINT or .PLOT: Unexpected FFT output name
Warning 1026 .PRINT/.PLOT/.PROBE: Missing declaration .FOUR LABEL=name
Warning 1027 .PRINT or .PLOT SSTNOISE: Expected SSTNOISE output, and not name
Warning 1028 .MEAS: Element name not declared
Warning 1029 .EXTRACT: Element name not declared
Warning 1030 .PRINT: Smith chart expects non-AC wave names
Warning 1031 .SSTPROBE name: second node assumed to be 0
Warning 1032 .PRINT/PLOT/PROBE/EXTRACT: bad number of tones specified
Warning 1033 .PLOT: name. wave type is incompatible with extract type
Warning 1034 name: Group-Delay specifications ignored in SST analysis
Warning 1035 .PRINT or .PLOT: Only WOPT() is allowed for OPT type
Warning 1036 SUBCKT name will be simulated as top level
Eldo® User's Manual, 15.3 1435