eldo_user

Error and Warning Messages
Miscellaneous Warnings
Table A-16. Miscellaneous Warnings
Warning Description
Number
Warning 901 Last time ignored on input signal at line: number
Warning 902 name: Model parameter ignored
Warning 903 Too many nodes to plot (>8)
Warning 904 Previous value of name superseded
Warning 905 VSAT is set to: number
Warning 906 VSATM is set to: number
Warning 907 Parameter not used: name
Warning 908 name: This parameter cannot be assigned
Warning 909 name: Unknown parameter
Warning 910 Unable to measure ISUB(name): Multiple connections
Warning 911 PORT name has only one connection
Warning 912 IBIS: name
Warning 913 IBIS: parameter name ignored
Warning 914 IBIS: parameter name not in the interval [0,1] is ignored
Warning 915 Probably missing a path to ground from object name
Warning 916 Unable to parse expression name
Warning 917 SWEEP specification on TRAN/DC/AC ignored when .STEP are used: these
two syntaxes are not compatible
Warning 918 The check for instance duplicates has been disabled (netlist too large). Use
.OPTION CHECKDUPL to override this limit.
Warning 919 .OPTION ACCOUT=1 can not be applied to FOUR(name).
Warning 920 Instances name, * not created because M is 0*
Warning 921 MC variation on name
Warning 922 .OPTION MEASDGT: value must be between 0 and 18
Warning 923 .OPTION MEASLINE: value can't be less than zero
Warning 924 Parameter %s is not a primitive. Unable to apply sensitivity
Warning 925 Character % ignored in expression
Warning 926
.MEAS on %s: Using voltage-dependant value on %s. This is not allowed:
value assumed to be 0.0
1432
Eldo® User's Manual, 15.3