eldo_user

Error and Warning Messages
Warnings Related to Commands
Warning
Number
Table A-13. Warnings Related to Commands (cont.)
Description
Warning 372 .SETSOA: Object name unknown
Warning 373 .SETSOA: Model name unknown
Warning 374 name analysis omitted because of the DCSWEEP analysis found
Warning 375 .SETSOA: Double specification on name
Warning 376 .LOOP: Object name undefined
Warning 377 .NOISETRAN is currently incompatible with name. Transient Noise Analysis is
therefore omitted. For example, when a netlist contains both .MC and
.NOISETRAN commands, the .NOISETRAN command is ignored.
Warning 378 EPS is possibly too large (name): The usual EPS value for Transient Noise is 1.0e-6
Warning 379 RELTOL is possibly too large (name): %e The usual RELTOL value for Transient
Noise is
Warning 380 VNTOL is possibly too large (name): %e The usual VNTOL value for Transient
Noise is
Warning 381 .PLOT/.PRINT: Wave name will not be plotted in .ASCII file
Warning 382 .OPTION name
Warning 392 .STEP PARAM name: Sweep already defined in the .DC command
Warning 393 .PROBE ISUB (name): No wild character allowed
Warning 394 .PZ ignored because of FNZ functions
Warning 395 .PROBE name: No nodes/objects found
Warning 396 ISUB(name) not accessible: name is a global node
Warning 397 ISUB: Node name not found
Warning 398 .PROBE: Missing keyword AC, DC or TRAN
Warning 399 Unable to display I(M/B/Jxx): name assumed
Warning 400 .TRAN: TSTART > TSTOP: TSTART set to 0
Warning 401 .STEP: INCR_SPEC > T2-T1
Warning 402 .NOISE: zero or negative argument
Warning 403 .AC: Frequency cannot be 0.0 or less: The value has been reset to 1.0
Warning 404 .MODDUP: element name not found
Warning 405 .MODDUP: cannot be used on element name
Warning 406 .LIB cannot find name
1424
Eldo® User's Manual, 15.3