eldo_user

Error and Warning Messages
Warnings Related to Objects
Warning
Number
Warning 209
Warning 210
Warning 211
Warning 212
Warning 213
Warning 214
Warning 215
Warning 216
Warning 217
Warning 218
Warning 219
Warning 220
Warning 221
Warning 222
Warning 223
Warning 224
Warning 225
Warning 226
Warning 227
Warning 228
Warning 229
Warning 230
Warning 231
Warning 232
Warning 233
Warning 234
Table A-12. Warnings Related to Objects (cont.)
Description
Parameter ignored: name
Z0 set to 50 W
RON set to 1 kW
W is less than WMIN. W is set to WMIN
L is less than LMIN. L is set to LMIN
Value becomes negative
W undefined. Default value is taken: number
L undefined. Default value is taken: number
RS is negative or zero: value reset to
Improper value. Default value is taken (1.0×100). Value: number
Undeclared inductor
Default values used for time specification
Instability may occur because some of the root modules of the denominator
are greater than 1, (outside the unit z circle). Poles are dumped in the standard
output file
Instability may occur because the real parts of some of the denominator’s
root are greater than 1, (outside the unit z circle). Poles are dumped in the
standard output file
Last specification ignored
Parameter already used as an equivalent: name
CPIN already called on pin: name
VSTATUS already called on: name
Resistor value is 0: object not called: name
This resistor is not a RC line. Parameter(s) ignored: name
WEFF=W-2DW too small or negative. Default value RES used
LEFF=L-2DL ≤ 0.0. Default value RES is used
LEFF and WEFF ≤ 0.0. Default value CAP is used
DTOA converter: Rhigh is not specified, the default value of 1 mW is taken
DTOA converter: Rlow is not specified, the default value of 1 mW is taken
This element cannot be converted into its switch equivalent
1418
Eldo® User's Manual, 15.3