eldo_user

Error and Warning Messages
Global Warnings
Warning
Number
Warning 44
Warning 45
Warning 46
Warning 47
Warning 48
Warning 49
Warning 50
Warning 51
Warning 52
Warning 53
Warning 54
Warning 55
Warning 56
Warning 57
Warning 59
Warning 60
Warning 61
Warning 62
Warning 63
Warning 64
Warning 65
Warning 66
Warning 67
Description
Table A-10. Global Warnings (cont.)
.MP not implemented with SST analysis
DATA name
Double definition for parameter name
Unusual value given for name
Multiple .TEMP not allowed in ADMS: only last TEMP value will be used
This circuit exhibits singularity, due to name
name is ignored because of Mach
Using .OPTION RMV0, name zero-voltage sources would have been removed
from the database
Optimizer not active with Eldo-demo
Eldo Mach partition UI can’t be used in Eldo Mach Black-Box mode
Eldo Mach Black-Box mode disabled because of Eldo Mach partition UI
.OPTION name has been set to
Large flat netlist: Eldo switches to a mode where the order in which statements
appear is important. In particular, make sure that .MODEL are defined on top
of the netlist. However, you can use command .DISFLAT for restoring original
Eldo behavior.
JWDB cannot be disabled when running Questa ADMS
OPTION RGNDI specified. It is used at least on device name
Probably missing a .MODSST command. TRAN performed
Option [P/N]GATEDEF also activates option FLOATGATE0
OPTION name set
Command name Variant name ignored
Command name not supporetd in H_mode
Probably missing surrounding ' or {} at or near name Eldo will consider that as
an expression, which is may be not what is expected
Unexpected token name That token is ignored by the parser
In .ALTER: ".del lib name" is ignoredIt can't be use without libtype or key
name to identify which library must be removed. Keeping "name" in file name
at line number
Eldo® User's Manual, 15.3 1413