eldo_user

Error and Warning Messages
Global Errors
Error
Number
Error 69
Error 70
Error 71
Error 72
Error 73
Error 74
Error 75
Error 76
Error 77
Error 78
Error 79
Error 80
Error 81
Error 82
Error 83
Error 84
Error 85
Error 86
Error 87
Error 88
Error 89
Error 90
Error 91
Error 92
Description
Table A-1. Global Errors (cont.)
Cannot find HDLA models
.OPTION name expects an integer value
TUNING: Unexpected parameter name
Probable syntax error in library name
Fatal error in name model, please check output file for details. Eldo Kernel can’t
find the ‘SBVAL.PAR’ file
Cannot find #endcom statement
Questa ADMS command must be used in place of Eldo in order to use
VHDL-AMS models
Internal error: Mismatch in parameter name
Line not allowed inside command file
Unknown command name
DEBUG command number name not found
.RUN: Unknown argument name
Too many files opened
Parameter not known: name
Unable to alter name
Missing parameters
Syntax error or
Syntax error at or near name
Error evaluating name
Command cannot be issued at run time, or
Command name cannot be issued at run time
name cannot change .MODEL card for that kind of element
name disabled because AC analysis performed within transient analysis. However,
with keyword ALL added on the .MC card, simulation should run
SST analysis cannot be performed: Device name is not supported
SST analysis cannot be performed: Gudm model on name not supported
SST analysis cannot be performed: MOS model on name should be a chargecontrolled
model
Eldo® User's Manual, 15.3 1383