eldo_user

Examples
Table 21-1. Eldo Examples (cont.)
Example Circuit Name Eldo Description
Example 20—DC Mismatch
Comparison with Monte Carlo
Analysis using ECL
Example 21—Post-Layout
Simulation using DSPF
Example 22—Extract Gain and
Phase Margin of a 2-Stage Opamp
Example 23—Parametric
Sensitivity Analysis
Example 24—Cell
Characterization: Setup Time
Extraction
Example 25—Setting up and
Handling Analog Busses
Example 26—Spectre
Compatibility Example
Example 27—Monte Carlo
Analysis Autostop
Tutorial—Using Power Analysis for
Static Leakage Analysis of a PLL
Circuit
Tutorial—High Impedance Fault
Detection of a PLL Circuit
Transient Noise Analysis Example
1—High-Rate Particle Detector
Transient Noise Analysis Example
2—Switched Capacitor Filter
dcmismatch_vs_mcsens.cir
dspf_backannotation.cir
gain_phase_margins.cir
sensitivity_parametric.cir
extract_setup_time_passfail.c
ir
sigbus_plotbus.cir
spectre_compatibility.scs
monte_carlo_autostop.cir
../power_analysis/
Power_Analysis_PLL.cir
../hiz/HiZ_PLL.cir
transient_noise_detector.cir
transient_noise_filter.cir
Eldo Control Language
comparison of
DCMISMATCH analysis
and Monte Carlo analysis.
Shows how to import a .dspf
file containing layout
parasitics.
Extract the gain and phase
margin of an opamp.
Parametric sensitivity
analysis (.SENSPARAM).
Extract the setup time of a
D-type flip-flop, using the
pass-fail method of the Eldo
optimizer.
Setting up and handling
analog busses .SIGBUS,
.SETBUS, .CHECKBUS.
Eldo support of Spectre
format netlist.
Monte Carlo analysis with
autostop.
Power Analysis tutorial.
High Impedance fault
detection tutorial.
Legacy transient noise
analysis example.
Legacy transient noise
analysis example.
Each example starts with a brief description of the circuit in question together with a circuit
diagram. A short summary of the Eldo commands used within the example follows this, to aid
users wishing to learn about a specific topic or the use of certain commands within Eldo. A
breakdown and explanation of each section of the netlist is then shown. Actual output results
from the circuit conclude each example using EZwave, the Eldo waveform viewer.
Additional examples are documented throughout the manual as listed in Table 21-2:
Eldo® User's Manual, 15.3 1271