CATALOGUE

COMPONENT PARTS
ROCKET ARTILLERY WEAPONS AND MUNITIONS
RUBBER GLAND
The rubber gland is designed for use in special products.
Main Specifications:
Diameter Height Pressure Working temperatures range
RUBBER SEALING RING FOR HYDRAULIC DEVICE 2,5…1092 mm 3…35 mm from 0,1 to 50 MPa from -60 to +200 o C
REINFORCE RUBBER SEALING RING FOR ROLLERS 6…480 mm 4…22 mm from 0,1 MPa from -60 to +170 o C
TWO- TONGUE LARGE RUBBER GLANDS 1760…2377 mm 68 mm from 0,2 to 1,16 MPa from 1800 to 2300 o C (short-time)
ARMORED, LARGE RUBBER GLAND BLOCK 2284 mm 50 mm from 0,17 MPa not more than 2800 o C
432.40.036-2 191,3 mm 9 mm not more than 4,9 MP from -20 to +200 o C
478DU4.43.005-1 403,5 mm 12 mm not more than 4,9 MP from -20 to +200 o C
432.40.037-2, 432.40.127-2 154…254 mm 5…9 mm not more than 4,9 MP from -20 to +200 o C
432.40.035-3, 432.40.047-4, 476.40.115 394.5…458.5 mm 8 mm not more than 4,9 MPa from -20 to +200 o C
457.02.101SB, 457.21.107 SB -2, 457.07.306 SB -1,
494SА.10.050
19.35…133.9 mm 8…15 mm not more than 0,05 MPa from -50 to +200 o C
RUBBER COAT 494SA.07.025
Used as a muff and provides the workability of an assembly unit under the wind influence.
Main Specifications:
Internal diameter
External diameter
Height
Working temperatures range
74 mm
125 mm
40 mm
from -40 to +100 o C
RUBBER TUBES
Used for dust and splashes protection of the assembly units, as well as for supplying working substances under the influence of oils,
liquids and gases.
Main Specifications:
432.33.756, 432.91.210, 432.95.286, 432.95.287, 434.83.171, 457.18.055-1, 457.18.068, 457.28.090, 459.28.094
Internal diameter
5.5…16 mm
Thickness
1.25…3.0 mm
Length
18…1,085 mm
Working temperatures range
from -45 to +100 o C
RUBBER HUNG SLEEVES
They are designed for supply of thermostatic air into an object.
Main Specifications:
Internal diameter
External diameter
Length
Pressure
Working temperatures range
131…202 mm
225…295 mm
415…620 mm
not more than 0.02 MPa
from -5 to +25 o C
238