CATALOGUE
Catalogue_2016-2017 Catalogue_2016-2017
OTHER PRODUCTS RADAR LOCATION AND AIR DEFENCE “CH-3841M” STAND-ALONE TIME-AND-FREQUENCY SYNCHRONIZATION DEVICE ON GLONASS/NAVSTAR GPS SATELLITE NAVIGATION SYSTEMS, DESIGNED FOR EQUIPPING CDMA COMMUNICATION MEANS. It fulfills the following tasks: Generation of 1РРS pulse signal with discretion 1Hz, it constant output in 24 hours; provides known coordinates operation using one NSV (navigation space vehicle); provides the operation in WGS-84 coordinate system or user’s coordinate system. Dimensions: 105х48х132 DC power supply: 7-12 V Power consumption: not more than 9 W Weight: 0,45 kg Main Specifications: 1РРS» signal is generated on RS422 port with an accuracy Signal waveform: pulse time pulse amplitude leading edge is synchronized with UTC time scale leading edge of a pulse meets the second bound no more than 100 nsec from 25 up to 1,6 nsec not more than 5 V SURFACE TEMPERATURE RELAY “PR4” Relay is designed to control the surface temperature in temperature range monitoring systems of radio-electronic equipment. Main Specifications: Adjustment range from -20 to +120 o C Discreteness 1 Degree Contacts that open when the temperature rises to the pickup value. Ambient temperature: from -65 to +95 o C t “OR4” VOLUME TEMPERATURE (PARTS OR AIR) RELAY Relay is designed for volume temperature control (parts or air) in temperature range monitoring systems of radio electronic equipment. t Ambient temperature: from -65 to +95 o C Main Specifications: Adjustment range from -20 to +120 o C Discreteness 1 Degree Contacts that open when the temperature rises to the pickup value. 206
RADAR LOCATION AND AIR DEFENCE OTHER PRODUCTS S1.153.UP1 is designed for use in special purposes products as an intermediate frequency amplifier. Microassemblage is made in climatic design UHL OST 4GO.073.212-85. Microassemblage is manufactured on thin-film technology. The board is installed in a standard enclosure on 153.15-2 adhesive film MPF-1. The body sealing is performed with laser welding. Main Specifications: Current consumption from the sources + 6.0 v Supply voltage: Current consumption from the source - 6.0 v 5,7...6,3 V The upper cut-off frequency bandwidth Weight: The lower cut-off frequency bandwidth ≤ 5,7 g The dissipation power Voltage gain Noise index Load Impedance Main Specifications: S1.155.КN1 MICROASSEMBLAGE Current consumption from the sources + 6.0 v Current consumption from the source - 6.0 v Gain voltage at frequency 40 MHz The upper frequency bandwidth limit Lower cutoff frequency bandwidth The output voltage limit Level at frequency 15 MHz MICROASSEMBLAGE It is used in radio receivers of different purposes. Microassemblage S1.155.КN1 is designed for use in 67N6, 96H6, 35N6, 96H6- 01, 39NB, 71KB, 64LB, 97UB, 96L6, 23B6, E-821, 1L29, 64N6, 9S112, 9S112-1, 9S15M2, 91N6 units. The functional purpose of Microassemblage: intermediate frequency signals commutation. Microassemblage is water/airproof. MICROASSEMBLAGE 20 mA 4 mA 160 MHz 3 MHz 150 mW 24 dB 4 dB 50...80 ohm S1.153.UP2 Microassemblage S1.153.UP2 is designed for use in special purposes products as a voltage amplifier and intermediate frequency signals amplitude limiter. Microassemblage is made in climatic design UHL OST 4GO.073.212-85. Microassemblage is manufactured on thin-film technology. The board is installed in a standard enclosure on 153.15-2 adhesive film MTF-1. The body sealing is performed with laser welding. 18 mA 5 mA 20 dB 100 MHz 8 MHz 300...500 mV Dissipation Power: 150 mW Weight: ≤7,0 g The dissipation power: 600 mW Weight: ≤ 7,5 g Main Specifications: Voltage attenuation at frequency 40 MHz ≥ 50 dB Voltage gain at frequency 40 MHz ≥ 0,55 Current consumption from sources +12V ≤ 27 mA Current consumption from sources +6V ≤ 18 mA Current consumption from sources -6V ≤ 4 mA 207
- Page 156 and 157: ENGINES AND UNITS SHIPBUILDING INDU
- Page 158 and 159: RADAR AND NAVIGATION EQUIPMENT SHIP
- Page 160 and 161: RADAR AND NAVIGATION EQUIPMENT SHIP
- Page 162 and 163: SONAR COMPLEXES AND SYSTEMS SHIPBUI
- Page 164 and 165: SONAR COMPLEXES AND SYSTEMS SHIPBUI
- Page 166 and 167: SONAR COMPLEXES AND SYSTEMS SHIPBUI
- Page 168 and 169: 168
- Page 170 and 171: RADAR STATIONS AND AIR DEFENCE EQUI
- Page 172 and 173: RADAR STATIONS AND AIR DEFENCE EQUI
- Page 174 and 175: RADAR STATIONS AND AIR DEFENCE EQUI
- Page 176 and 177: EQUIPMENT FOR RADIO-ELECTRONIC WARF
- Page 178 and 179: DEVICES AND EQUIPMENT RADAR LOCATIO
- Page 180 and 181: DEVICES AND EQUIPMENT RADAR LOCATIO
- Page 182 and 183: DEVICES AND EQUIPMENT RADAR LOCATIO
- Page 184 and 185: DEVICES AND EQUIPMENT RADAR LOCATIO
- Page 186 and 187: DEVICES AND EQUIPMENT RADAR LOCATIO
- Page 188 and 189: COMMUNICATION MEANS RADAR LOCATION
- Page 190 and 191: COMMUNICATION MEANS RADAR LOCATION
- Page 192 and 193: OTHER PRODUCTS RADAR LOCATION AND A
- Page 194 and 195: OTHER PRODUCTS RADAR LOCATION AND A
- Page 196 and 197: OTHER PRODUCTS RADAR LOCATION AND A
- Page 198 and 199: OTHER PRODUCTS RADAR LOCATION AND A
- Page 200 and 201: OTHER PRODUCTS RADAR LOCATION AND A
- Page 202 and 203: OTHER PRODUCTS RADAR LOCATION AND A
- Page 204 and 205: OTHER PRODUCTS RADAR LOCATION AND A
- Page 208 and 209: OTHER PRODUCTS RADAR LOCATION AND A
- Page 210 and 211: OTHER PRODUCTS RADAR LOCATION AND A
- Page 212 and 213: OTHER PRODUCTS RADAR LOCATION AND A
- Page 214 and 215: 214
- Page 216 and 217: MISSILE SYSTEMS ROCKET ARTILLERY WE
- Page 218 and 219: MISSILE SYSTEMS ROCKET ARTILLERY WE
- Page 220 and 221: GUIDED MISSILES AND BOMBS ROCKET AR
- Page 222 and 223: GUIDED MISSILES AND BOMBS ROCKET AR
- Page 224 and 225: ARTILLERY ARMAMENT ROCKET ARTILLERY
- Page 226 and 227: SMALL ARMS ARMAMENT ROCKET ARTILLER
- Page 228 and 229: SMALL ARMS ARMAMENT ROCKET ARTILLER
- Page 230 and 231: OPTICAL AND OPTICAL-ELECTRONIC DEVI
- Page 232 and 233: OPTICAL AND OPTICAL-ELECTRONIC DEVI
- Page 234 and 235: OPTICAL AND OPTICAL-ELECTRONIC DEVI
- Page 236 and 237: COMPONENT PARTS ROCKET ARTILLERY WE
- Page 238 and 239: COMPONENT PARTS ROCKET ARTILLERY WE
- Page 240 and 241: COMPONENT PARTS ROCKET ARTILLERY WE
- Page 242 and 243: ELEMENTS OF MISSILES AND AMMUNITION
- Page 244 and 245: ELEMENTS OF MISSILES AND AMMUNITION
- Page 246 and 247: SHELLS AND ROUNDS ROCKET ARTILLERY
- Page 248 and 249: EXPLOSIVES ROCKET ARTILLERY WEAPONS
- Page 250 and 251: OTHER PRODUCTS ROCKET ARTILLERY WEA
- Page 252 and 253: REPAIR AND UPGRADING WE DO: REPAIR
- Page 254: CONTACTS GOVERNMENT-AUTHORIZED ARMS
RADAR LOCATION AND AIR DEFENCE<br />
OTHER PRODUCTS<br />
S1.153.UP1<br />
is designed for use in special purposes products as an intermediate frequency amplifier.<br />
Microassemblage is made in climatic design UHL OST 4GO.073.212-85.<br />
Microassemblage is manufactured on thin-film technology. The board is installed in a<br />
standard enclosure on 153.15-2 adhesive film MPF-1.<br />
The body sealing is performed with laser welding.<br />
Main Specifications:<br />
Current consumption from the sources + 6.0 v<br />
Supply voltage:<br />
Current consumption from the source - 6.0 v<br />
5,7...6,3 V<br />
The upper cut-off frequency bandwidth<br />
Weight:<br />
The lower cut-off frequency bandwidth<br />
≤ 5,7 g<br />
The dissipation power<br />
Voltage gain<br />
Noise index<br />
Load Impedance<br />
Main Specifications:<br />
S1.155.КN1<br />
MICROASSEMBLAGE<br />
Current consumption from the sources + 6.0 v<br />
Current consumption from the source - 6.0 v<br />
Gain voltage at frequency 40 MHz<br />
The upper frequency bandwidth limit<br />
Lower cutoff frequency bandwidth<br />
The output voltage limit Level at frequency 15 MHz<br />
MICROASSEMBLAGE<br />
It is used in radio receivers of different purposes.<br />
Microassemblage S1.155.КN1 is designed for use in 67N6, 96H6, 35N6, 96H6-<br />
01, 39NB, 71KB, 64LB, 97UB, 96L6, 23B6, E-821, 1L29, 64N6, 9S112, 9S112-1,<br />
9S15M2, 91N6 units. The functional purpose of Microassemblage: intermediate<br />
frequency signals commutation.<br />
Microassemblage is water/airproof.<br />
MICROASSEMBLAGE<br />
20 mA<br />
4 mA<br />
160 MHz<br />
3 MHz<br />
150 mW<br />
24 dB<br />
4 dB<br />
50...80 ohm<br />
S1.153.UP2<br />
Microassemblage S1.153.UP2 is designed for use in special purposes products as a voltage<br />
amplifier and intermediate frequency signals amplitude limiter.<br />
Microassemblage is made in climatic design UHL OST 4GO.073.212-85.<br />
Microassemblage is manufactured on thin-film technology. The board is installed in a<br />
standard enclosure on 153.15-2 adhesive film MTF-1. The body sealing is performed with<br />
laser welding.<br />
18 mA<br />
5 mA<br />
20 dB<br />
100 MHz<br />
8 MHz<br />
300...500 mV<br />
Dissipation Power:<br />
150 mW<br />
Weight:<br />
≤7,0 g<br />
The dissipation power:<br />
600 mW<br />
Weight:<br />
≤ 7,5 g<br />
Main Specifications:<br />
Voltage attenuation at frequency 40 MHz<br />
≥ 50 dB<br />
Voltage gain at frequency 40 MHz ≥ 0,55<br />
Current consumption from sources +12V<br />
≤ 27 mA<br />
Current consumption from sources +6V<br />
≤ 18 mA<br />
Current consumption from sources -6V<br />
≤ 4 mA<br />
207
Change language