CATALOGUE

RADAR LOCATION AND AIR DEFENCE
COMMUNICATION MEANS
R-173 PM1
RADIO TRANSCEIVER
Radio transceiver R-173 PM1 is designed
to receive telephone information with
frequency modulation under the ultra-high
frequency range; to be installed on mobile
objects.
Overall dimensions of radio set
together with shock-absorber:
222х210х239
Consumption current:
1,2 A
The radio receiver power supply is vehicular VDC:
+27 (22-29) W
Weight:
not more than 30 kg
Main Specifications:
Frequency rate
Frequency spacing
Radio receiver set sensibility:
during analog signal receiving, not worse
with noise reducer, not worse than
during digital information receive in the frequency range
and under the error coefficient of 1х10-2, not worse than
output voltage of the radio receiver set:
mode intercom system, not worse than
terminal equipment mode
30000 - 75999 kHz
1 kHz
1,5 uV
3 uV
2 uV
11 W
(0,52 ± 0,1) W
TELEPHONE SET
TA-57-U
It is designed to provide telephone
communication under the field conditions.
Main Specifications:
Module of input resistance on the frequency of 1000 Hz
out voltage on a frequency of 1000 Hz
electrical insulation resistance, нnot less than
reliability indexes of the device:
time between failures
average operation time
mean recovery time
Working temperature range
600 (+400; -100) Ohm
0.2-0.6 W
100 Ohm
10000 hours
15 years
20 min
from -40 to +50 o C
Overall dimensions:
206x165x80
Weight:
2.5 kg
R-163-50K
RADIO STATION
It is designed to operate in shortwave
band, provides telephone and
telegram radio communications
in simplex two-frequency modes
between stationary and mobile
objects.
Transceiver overall dimensions:
300x290x414
Power supply:
22-30 W
Weight of the working facility:
60 kg
Main Specifications:
Frequency rate
retuning time between preset frequencies
Peak power of transceiver
transceiver sensibility
Current, consumed by transceiver from power source, not more than:
receive mode
transmitting mode
Power supply
communications range
2-30 МHz
15 sec
50 W
3 microvolt
1.3 A
14 A
22-30 W
350 km
189