CATALOGUE

DEVICES AND EQUIPMENT
RADAR LOCATION AND AIR DEFENCE
SPECIALIZED DATA PROCESSING COMPUTER
Specialized data processing computer
is designed for operation on tracked
and wheeled transport vehicles as a
computer of automated commander’s
workstation.
Overall dimensions:
200x300x150
Size of monitor by diagonal:
10,4 (26) inch (cm)
Power consumption:
not more than 50 W
Main Specifications:
COMPACT COMMAND RADIO LINE FOR ANTITANK SYSTEMS
Main Specifications:
Central processor
АМD GEODE LX800
Core storage volume
128-1024 MB
Disk memory volume
512 MB (1024 MB – on flash-disk)
Interfaces:
RS-232(422/485) with operating speed 250 Kbit/sec
(up to1,5 Mbit/sec)
8 pcs.
USB V2.0
4 pcs.
Resolution 640 × 480
The compact command radio line is designed
for radio-command control of antitank guided
missiles and “Shturm”, “Ataka” – type and
other projectiles.
The command radio line includes:
command transmission equipment (CTE) mounted on a carrier (helicopter, boat, ground installation);
On-board shockproof receiving equipment mounted on a missile (projectile);
Test and control equipment for CTE monitoring;
Test and control equipment for monitoring the missile (projectile) receiver.
Operating frequency band
millimeter
Radio control range
up to 8 km
Universal application (Air Forces, Navy and Land Forces), compact and miniature design, high noise immunity.
PORTABLE COMMANDER’S TERMINAL
The Commander’s Terminal is designed for use in
a command, control and communication system of
the land forces on tactical level as a radio terminal
in a complete set with portable radio station and
data communication equipment.
Overall dimensions:
220x110x60
Supply voltage:
12 V
Power consumption:
2,4 W
Weight:
not more than 2 kg
Main Specifications:
Operational device:
processor type
I486
clock rate
66 MHz
Volatile memory space
2 MB
RAM memory space
2 MB
Input/output port
СОМ1, СОМ2
type of interface
RS-232/422/485
data transfer rate
up to 115 kbit/sec
Display:
character cell number 4 × 20
size of displaying zone
77 × 26 mm
184