CATALOGUE

Catalogue_2016-2017 Catalogue_2016-2017

07.04.2016 Views

EQUIPMENT, KITS AND AGGREGATES AIRCRAFT ENGINEERING AND MAINTENANCE 2PBD-60, PBD-59V, PBD-59MV, PBD-59IV ELECTROMECHANICAL DRIVES AND ACTUATORS They are mounted on cluster holders and dispensers of “Tuseries” aircrafts and are designed for opening of load-carrying shackles and drop blocking. ARP-20, 20H, 21 AUTONOMOUS ELECTROHYDRAULIC CONTROL ACTUATOR ARP-20, 20H, 21 are designed to deflect the rudder according to the input mechanical signal in reversion mode of the aircraft wheel steering system. Application: An-148 MPF-2B, MPF-6B MOTOR-OPERATED MECHANISMS They are designed for landing lamp control, used on aircrafts. MVR-2B 2, MVR-2P, MVR-2A, MVR-2M MOTOR-OPERATED MECHANISMS They are designed for control of aero-engine oil radiator shutter, used on aircrafts. UT-11M, UT-15,UT-10V, UT-6D MOTOR-OPERATED MECHANISMS They are designed for altitude relay aileron control, used on aircrafts. PUS-36DM, PUS-36-68, PUS-36-71 CONTROL DEVICES The devices are mounted on the MiG, Su and An series aircraft and are designed for serial processing of 36 electric impulses in multichannel system and their distribution in user circuits in definite order. 122

AIRCRAFT ENGINEERING AND MAINTENANCE RADIO ELECTRONIC TECHNIQUE, EQUIPMENT AND SYSTEMS 9С477 Equipment for transmitting of coded radio commands; constitutes a part of 9К113 weapon system of Мі-24V Helicopter. I-256.20-2М Designed for formation of control radio commands in accordance with input guided voltage and transmitting of these commands to onboard receiver of the aircraft. Included in the armament of Мі-28N Helicopter. I-505.20-2, 20-2M It is designed for maintenance and troubleshooting up to constructively plug-in unit of 256.20-2 product without removing the equipment from the site and cables placement. CH-3700-03 NAVIGATION TRANSCEIVERS GNSS sensor is designed for determination of current position coordinates, track angle, speed and time on GLONASS and GPS signals at any point and any time aside from weather conditions. 1АТВ-2 Radio transmitting unit designed to generate microwave radio commands based on input modulation signals, and transmit these commands to an antenna unit. This unit is part of I-256.20-2. I-256.20-2 Designed for formation of control radio commands in accordance with input guided voltage and transmitting of these commands to onboard receiver of the aircraft. Constitutes an integral part of 9К113 weapon system of Мі-8 Helicopter. 123

AIRCRAFT ENGINEERING AND MAINTENANCE<br />

RADIO ELECTRONIC TECHNIQUE,<br />

EQUIPMENT AND SYSTEMS<br />

9С477<br />

Equipment for transmitting of coded radio commands;<br />

constitutes a part of 9К113 weapon system of Мі-24V<br />

Helicopter.<br />

I-256.20-2М<br />

Designed for formation of control radio commands in<br />

accordance with input guided voltage and transmitting of<br />

these commands to onboard receiver of the aircraft. Included<br />

in the armament of Мі-28N Helicopter.<br />

I-505.20-2, 20-2M<br />

It is designed for maintenance and troubleshooting up to<br />

constructively plug-in unit of 256.20-2 product without<br />

removing the equipment from the site and cables placement.<br />

CH-3700-03<br />

NAVIGATION TRANSCEIVERS<br />

GNSS sensor is designed for determination of current position<br />

coordinates, track angle, speed and time on GLONASS and GPS<br />

signals at any point and any time aside from weather conditions.<br />

1АТВ-2<br />

Radio transmitting unit<br />

designed to generate<br />

microwave radio commands<br />

based on input modulation<br />

signals, and transmit these<br />

commands to an antenna<br />

unit. This unit is part of<br />

I-256.20-2.<br />

I-256.20-2<br />

Designed for formation of control radio commands in<br />

accordance with input guided voltage and transmitting of these<br />

commands to onboard receiver of the aircraft. Constitutes an<br />

integral part of 9К113 weapon system of Мі-8 Helicopter.<br />

123

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!