You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. INOWEB Module<br />
Manual INOWEB Control<br />
To be able to see the CPS device<br />
status on an HTML page, you need an<br />
ordinary web browser, e.g. Internet<br />
Explorer, Mozilla, Opera or Konqueror.<br />
Selection of the respective INOWEB is<br />
done by entering the IP address in the<br />
address line of the web browser.<br />
If access is secured by a password, this<br />
will be asked for prior to the first<br />
loading of the page. The user name is<br />
always WEBUSER. The user will be<br />
logged onto the INOWEB module<br />
until the window is closed.<br />
The main window shows the system<br />
with destination, status, current and<br />
voltage and the status of the<br />
individual circuits.<br />
Additional features for the user via the<br />
webpage are:<br />
- start function test<br />
- lock device<br />
- unlock device<br />
- manual reset<br />
- reset (reload configuration)<br />
- print error message<br />
After clicking on a circuit transfer (SKU<br />
with individual monitoring) the lights<br />
and their status will be shown. Lights<br />
shown in red means there is an error,<br />
green is ok. The destinations are<br />
shown when the mouse pointer is<br />
moved onto the respective light. After<br />
a moment, the destination text will<br />
appear below the pointer. As the text<br />
has to be uploaded from the device,<br />
the destination will be shown after a<br />
short delay.<br />
The picture of the circuits and circuit<br />
monitoring does not show the<br />
individual lights, only the actual and<br />
desired current parameters are shown.<br />
708 081 10 INOTEC 09.01.2006