(18) NEW PWR REELING MODEL 2630 MEASURING DEVICE CUT-SHEET
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Length Measurement Device<br />
Model <strong>2630</strong> – High Speed Small Diameter<br />
Features<br />
• Continuous operation at up to 300 meters per minute or 50 counts per second<br />
• Self-lubricating bearings on both rollers<br />
• Heavy duty cast structure<br />
• Hardened steel inlet and outlet guides<br />
• Polyurethane covered measuring wheel fitted as standard<br />
The machine is equipped with two adjustable tension springs, mounted externally, which can be<br />
unhooked from their anchor. This allows the measuring head to be pivoted up to a backstop to<br />
facilitate threading the cable through the machine. When in position, these springs grip the cable<br />
between the measuring roller and the bottom roller. They should be adjusted for the minimum<br />
tension required to prevent slippage.<br />
Specification:<br />
Maximum wire diameter<br />
15mm (0.59 inches)<br />
Measuring wheel circumference<br />
250mm (9.84252 inches)<br />
Maximum speed of travel<br />
Units of measurement<br />
300.0 meters / min. 300.11 feet/inch Meters / Centimeters or Fee / inches<br />
(4921 ft. / min) or 3000 counts per<br />
minute or whichever is lower.<br />
6747 Signat Drive • Houston, TX 77041 • PH# 713-466-6500 • FX# 713-466-3600<br />
Please Visit Our Website: www.pwrmfg.com