Centrifugal Pumps Design and Application 2nd ed - Val S. Lobanoff, Robert R. Ross (Butterworth-Heinemann, 1992)

Alignment 523
3. Essinger, J. N., Benchmark Gauges for Effective Hot Alignment of
Turbomachinery, Houston: Acculign, Inc., undated.
4. Indikon Measuring Systems—Misalignment, Cambridge, Massachusetts:
Indikon Company, Inc., 1977.
5. Jackson, C., "Shaft Alignment Using Proximity Transducers—
ASME Paper 68-PET-25," New York: The American Society of Mechanical
Engineers, 1968.
6. Murray, M. G., Alignment Manual for Horizontal, Flexibly-Coupled
Rotating Machines, 3rd Edition, Baytown, Texas: Murray & Garig
Tool Works, 1983.
7. , "Flange Fitup Problems? Try a Dutchman," Hydrocarbon
Processing, Vol. 59, No. 1, January 1980, pp. 105-106.
8, , Machinery Alignment Plotting Board, Baytown, Texas:
Murray & Garig Tool Works, 1980
9. , Machinery Alignment Postioners, Baytown, Texas:
Murray & Garig Tool Works, 1978.
10. , "Machinery Shaft/Coupling Alignment Strategy Cuts
Manhours and Downtime," Oil & Gas Journal, Vol. 81, No. 28,
July 11, 1983, pp. 55-61.
11. , "Out of Room? Use Minimum Movement Machinery
Alignment," Hydrocarbon Processing, Vol. 58, No. 1, January
1979, pp. 112-114.
12. , "Practical Considerations for Pump Baseplates, Grouting
and Foundations," 3rd International Pump Symposium Proceedings,
1986, pp. 131-136.
13. , "Two New Systems for Measuring Alignment Thermal
Growth," Vibrations, Vol. 6, No. 4, Willowbrook, Illinois: The Vibration
Institute, December 1990, pp. 9-15.
14. Piotrowski, J., Shaft Alignment Handbook, New York: Marcel Dekker,
Inc., 1986.