You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>DoveBid</strong> <strong>Webcast</strong> <strong>Auction</strong><br />
by order of<br />
<strong>Auction</strong> of off-lease<br />
Semiconductor, Disk Drive<br />
and Printed Circuit Board<br />
equipment. Also including<br />
a large selection of<br />
Microscopes and Optical<br />
Inspection equipment<br />
<strong>Auction</strong>:<br />
Thursday<br />
February 8, 2001<br />
10am PT<br />
Preview:<br />
Wednesday<br />
February 7, 2001<br />
9am – 5pm PT<br />
San Jose, CA<br />
www.dovebid.com<br />
www.industrialauctioneers.org
<strong>Auction</strong><br />
Thursday, February 8, 2001<br />
10am PT<br />
<strong>Auction</strong> Location<br />
Comdisco Electronics<br />
3775 North 1st Street<br />
San Jose, CA 95134<br />
Preview<br />
Wednesday, Febraury 7, 2001<br />
9am – 5pm PT<br />
Preview Locations<br />
Comdisco Electronics<br />
3775 North 1st Street<br />
San Jose, CA 95134<br />
Preview Location Code – Comdisco<br />
Driving Directions:<br />
From San Francisco or San Jose: Take US-101 South<br />
(from San Francisco) or North (from San Jose). Exit east<br />
onto Highway 237 East. Exit North 1st Street. Proceed<br />
south on North 1st Street. Watch for auction signs.<br />
Comdisco Electronics<br />
800 South Milpitas Blvd.<br />
Milpitas, CA 95035<br />
Preview Location Code – Milpitas<br />
Driving Directions: From San Francisco or San Jose. Take<br />
US-101 South (from San Francisco) or North (from San<br />
Jose). Exit east onto Highway 237 East. Exit right onto<br />
South Milpitas Blvd. Watch for auction signs.<br />
Allied<br />
1732 Rogers Ave<br />
San Jose, CA 95112<br />
Preview Location Code – Allied<br />
Take 101 South Toward San Jose. Take the First St. Exit<br />
and Turn left at the first traffic signal on to Brokaw Rd.<br />
Stay on Brokaw cross First St. turn right on to Rogers<br />
Ct. Allied is located on the Left. Watch for auction signs.<br />
Suggested Lodging<br />
Doubletree Hotel • 2050 Gateway Place<br />
408-453-4000<br />
Hyatt San Jose • 1740 North 1st Street<br />
408-993-1234<br />
Radisson Plaza San Jose • 1471 North 1st Street<br />
408-452-0200<br />
2<br />
<strong>Auction</strong>eer's Note<br />
<strong>DoveBid</strong> is pleased to have been selected by<br />
Comdisco Electronics to conduct an auction of<br />
off-lease equipment. Asset categories include<br />
Lithography, Automatic Test Equipment, Implant,<br />
Disk Drive, Metrology, Deposition and Surface<br />
Mount. Included in this auction will be a large<br />
selection of optical inspection equipment formerly<br />
owned by Applied Magnetics Korea. Please take<br />
note that there are several preview locations where<br />
the assets may be inspected. The auction will be<br />
conducted at Comdisco Electronics, 3775 North<br />
1st St. in San Jose. The complete catalogue of<br />
items available in this sale can be found on our<br />
website at www.dovebid.com. We thank you in<br />
advance for your interest and look forward to your<br />
participation either in-person or on the internet.<br />
Can’t make it to San Jose? Now with<br />
<strong>DoveBid</strong>’s <strong>Webcast</strong> technology<br />
anyone around the world can bid on<br />
this auction through the Internet. Go to <strong>DoveBid</strong>.com:<br />
Register up to the day before the sale and download the free<br />
software. Bid in Real Time!<br />
All you need is your computer, Internet access and a touchtone<br />
telephone, to participate in this live auction.<br />
With <strong>Webcast</strong> technology, you are virtually there on the<br />
auction floor. The action is live and you are bidding with<br />
people in the room and around the world.<br />
The image of the current asset being sold will be displayed on<br />
your screen. You’ll hear the auctioneer on your telephone,<br />
“Going Once. . . Going Twice. . .” You press 1 on your<br />
telephone keypad to raise your paddle and you’ll hear: “Sold on<br />
the web!”<br />
Terms and Conditions<br />
• Bidders are provided with catalogs which list the item(s) being<br />
offered. We encourage you to preview the assets prior to placing bids<br />
on any items.<br />
• Any new items will come with the standard manufacturer's warranty.<br />
• All open box items are sold “AS IS”, “WHERE IS”, AND “WITH<br />
ALL FAULTS”.<br />
• Applicable taxes will be added to the purchase price and the Buyer’s<br />
Premium of all taxable items.<br />
• <strong>DoveBid</strong> shall charge each successful bidder a 13% buyer's premium<br />
for each sale at the auction, in addition to the purchase price as bid.<br />
Purchasers who pay in the form of cash, cashier's check, company<br />
check (with a letter of guarantee) or wire transfer shall receive a<br />
discount from the buyer's premium equal to 3% of the purchase<br />
(unless such purchasers bid over the Internet, in which case the<br />
discount shall be equal to 1% of the purchase price).<br />
• Complete Terms & Conditions are contained in the Sale Catalog and<br />
on the website at www.dovebid.com.<br />
• Please review the Terms and Conditions prior to placing bids on any<br />
items.
SVG MICRASCAN II DUV<br />
Stepper<br />
Serial Number 859-0050-007<br />
Preview Location – Comdisco<br />
• 8-inch system<br />
• 350nm resolution<br />
• HE-XE light source<br />
• Marquis (quad-perature)<br />
upgrade<br />
• DESC desktop editing<br />
• Remote ECU<br />
• Return transition duct<br />
• Charcoal filtration system<br />
• Seismic restraints<br />
LITHOGRAPHY<br />
• Soft seal chuck<br />
• Diagnostic analysis system<br />
• Focus grating reticle<br />
• Focus wedge reticle-bright field<br />
• Line-width reticle-bright field<br />
• Line-width reticle<br />
• Overlay reticle<br />
• Overlay test set<br />
• Chuck cleaning tool<br />
GCA ALS WAFER STEPPER<br />
Quantity available 2<br />
• 2040 Tropel 5x I-line reduction lens<br />
production resolution = .73mm R&D<br />
resolution = .55mm<br />
• Exposure illumination uniformity = ±<br />
2%<br />
• 200mm wafer capability<br />
• X&Y stage precision = .15mm 3s<br />
• Layer to layer stacking registration global<br />
alignment = .3mm 3s local alignment =<br />
.2mm 3s<br />
• Reticle management system (RMS) 500<br />
cycles<br />
• Automatic wafer handler (AWH) 500<br />
One may be previewed at Comdisco. The<br />
other is located in New Hampshire. Please<br />
call Doug Berman at 650.377.2628 to<br />
arrange a viewing appointment to see the<br />
item in New Hamphire.<br />
Please note that some of these photos used for illustrative purposes only.<br />
3<br />
SVG 90 Coat/Develop System<br />
Preview Location – Milpitas<br />
• Configured for 200mm wafer<br />
• 2 each 90211S elevators<br />
• 1 each output stage<br />
• 1 each 9044S hot plate<br />
• 2 each 9038S/9037S stations<br />
• 1 each chill centering stage<br />
• 1 each 9026 coat station<br />
• 1 each 9032 develop station<br />
• 2 each serial arms<br />
• Mulitpath wafer transport system<br />
• Control module<br />
• Semifab CD-200<br />
• Fluid temperature<br />
• Microbar Trackmate dispense cabinet<br />
For your appraisal needs, please contact<br />
our fully staffed valuation department at<br />
800.665.1043<br />
As a courtesy to our buyers, <strong>DoveBid</strong> can provide<br />
contact information for shipping companies that<br />
are scheduled to attend this auction. For more<br />
information please visit the <strong>DoveBid</strong> website at<br />
www.dovebid.com or call Customer Care<br />
department at 800.665.1042.<br />
@<br />
Bid online<br />
www.dovebid.com
LITHOGRAPHY<br />
GCA 8000 G-Line Wafer Stepper<br />
Preview Location – Comdisco<br />
Serial Number 1450<br />
• 2000 Maximus type<br />
• Pellicle conversions: yes<br />
• Platen: 100mm offset 5-inch reticles<br />
- 103 fiducial separation<br />
- no platen chuck wide field<br />
• PPC platen casting<br />
• Column UC-1<br />
• AFS 100 split beam detection autofocus<br />
system<br />
• DFAS local alignment<br />
• Lens: Tropel, model number 2035<br />
• Atmospheric compensation system<br />
- no ACS weather station<br />
• 6.5 DFAS software<br />
• Microscope: yes<br />
- objective spacing: 101<br />
• RMS 10<br />
• X/Y stages: high speed<br />
• Theta stage: Theta II<br />
• No intensity qualifier<br />
• No INSITU<br />
• Automatic wafer handler<br />
- 8-inch wafer size<br />
- AW/H II<br />
• Ikegami BNC TV camera system<br />
• 9289 computer interface<br />
• AWA/D global alignment<br />
• Software: version 605.1, June 26, 1989<br />
• Pin patch box connections<br />
• TMC blue isolation table<br />
• Standard electronics rack- white<br />
- no emergency on/off<br />
- no A/C power distribution<br />
• 525 video terminal<br />
• 2000 Mercury Arc power supply<br />
TERADYNE J937 Memory Test System<br />
Serial Number 8845605<br />
Preview Location – Comdisco<br />
• Test Station with 3 Timing Generators<br />
(8) edges each and (1) address<br />
descramble<br />
• Sun III CPU, Sun based 68020CPU<br />
with Sun 3/260, 4M RAM, 327 Mb<br />
disk, Color Monitor, _ tape drive, (6)<br />
RS232 serial ports<br />
• Parametric Measurement Unit (PMU)<br />
• (36) TW 399 I/O’s<br />
• (36) TW 401 Drivers<br />
• (8) TW 367 Address/Data Formatters<br />
• (2) TW 366 Clock Formatters (1<br />
regular and 1 special)<br />
• Manipulator<br />
• 4 MB Catch RAM<br />
4<br />
AUTOMATIC TEST EQUIPMENT<br />
ADVANTEST 6841 Dynamic Test Handler<br />
Preview Location – Comdisco<br />
• TSOP, SOP, SOJ capable<br />
• Simultaneous testing of 64 devices in parallel<br />
• 3,000 devices/hour<br />
• -30 to +125ºC<br />
ASECO S-170 Handler<br />
Serial Number 3009170<br />
Preview Location – Comdisco<br />
• SOIC/N (.150") 8 to 16<br />
Lead Operation<br />
• -55 to +150 Operation<br />
• Dual 6-Channel aluminum<br />
magazine input<br />
• Eight 6-Channel aluminum<br />
magazine output<br />
• Unrestricted Vertical Test<br />
Station<br />
• CRT Display with Soft-Key<br />
Entry<br />
• 208/220 VAC 50/60Hz<br />
• Contactor Assembly (Side<br />
Actuated)<br />
• Door Assy, Temperature<br />
Chamber (Tri-Temp)<br />
• Antistat
MEGATEST GENESIS II<br />
Memory Test System<br />
Serial Number MS245<br />
Preview Location – Comdisco<br />
• 8 station - four head<br />
• PC Based Controller<br />
• Color monitor<br />
• Xenix operating system<br />
• Timing generator expansion<br />
• (1) 36M extendable buffer error-catch<br />
module<br />
• (2) RAM multi-head manipulators<br />
• Ethernet interface board<br />
SYMTEK 360 Dual Site<br />
Handler<br />
Serial Number 16010<br />
Preview Location –<br />
Comdisco<br />
• -55 to +155ºC<br />
• 600 mil, 28 lead Dual<br />
Inline Package Test<br />
• 12 sleeve, automatic<br />
unload<br />
• 13 category<br />
AUTOMATIC TEST EQUIPMENT<br />
ADVANTEST T3381 VLSI Test System<br />
Serial Number AA11<br />
Quantity 2<br />
Preview Location – (1) Comdisco, (1)<br />
Milpitas<br />
• (1) 512 pin AG test head populated to<br />
256 pins<br />
• TG’s 64 edges<br />
• 32MB SBM<br />
• Universal DC parametric measurement, 1<br />
unit for 256 pins<br />
• Multi DC parametric measurements 16<br />
units for 256 pins<br />
• CPU TP-3 with 2MB memory<br />
• 4-Programmable power supplies<br />
• GPIB interface<br />
Daymarc Model #797<br />
Serial Number 797-P-<br />
K8019<br />
ALSO AVAILABLE:<br />
ADVANTEST 3741 Dynamic Test Handler<br />
• ZIP, SOP, SOJ, TSOP capable<br />
• Simultaneous testing of 32 devices in parallel<br />
• Throughput: ± 3,500 devices/hour<br />
• -30 to + 125ºC<br />
ADVANTEST M3841A Dynamic Test Handler<br />
Quantity 2<br />
Preview Location - Milpitas<br />
• ZIP, SOP, DIP, SOJ, LCC, TSOP<br />
• Simultaneous testing of 16 devices in parallel<br />
• 3,000 devices/hour<br />
• -30 to +125ºC<br />
5<br />
MEGATEST GENESIS II<br />
Memory Test System<br />
Serial Number MS213<br />
Preview Location – Comdisco<br />
• 8 station - four head<br />
• PC Based Controller<br />
• Color monitor<br />
• Xenix operating system<br />
• Timing generator expansion<br />
• 16M data buffer module (DBM)<br />
• 4M buffer error catch module (BEM)<br />
• 2) RAM multi head manipulators<br />
• Ethernet interface board<br />
IMPLANTATION<br />
Semitool VTP-1500 Vertical Tube Furnace<br />
Serial Number 49894<br />
Preview Location – Comdisco
APPLIED MATERIALS 9200<br />
High Current Ion Implanter<br />
Preview Location – Comdisco<br />
• 180KeV (200mm) implanter<br />
• Host computer interface<br />
• Gas box (Boron, Germanium)<br />
• Wafer notch orienter<br />
• Gas panel high process port<br />
• Spare ion source and stand<br />
• Cryoline extension kit<br />
• Flood gun<br />
• 2 CTI Cryo’s<br />
• Leybold wet pumps<br />
• CVC diffusion pump on source<br />
• Closed loop D.I. water cooling system<br />
• Comes with 3 ion sources, 3 extractor<br />
assemblies, 1 8-inch disk (inside end station),<br />
manuals and documentation<br />
• Gases used: BF3, Arsenic (from vaporizer),<br />
Phosphorus, Silicon Tetrafluoride, Argon, and<br />
Germanium Tetrafluoride<br />
BDF-4 Horizontal Furnace<br />
Serial Number DTIS-2<br />
Preview Location – Milpitas<br />
• Four Tube Furnace configured for Wet<br />
Oxidation<br />
• Right to Left loading, loaders rebuilt by Bruce<br />
• Round Scavengers with Round Pipes<br />
• Source by ACS<br />
• Vacuum Pump in Source Cabinet<br />
• 7351C Controllers<br />
• Configured for 5" Wafer<br />
IMPLANTATION<br />
ALSO AVAILABLE:<br />
APPLIED MATERIALS 9200XJ<br />
High Current Ion Implanter<br />
• 180KeV (200mm) implanter<br />
• 9004-3 automated variable angle<br />
• Host computer interface<br />
• Wafer notch orienter<br />
• Automated charge control<br />
• Gas panel high pressure port<br />
• Spare ion source and stand<br />
• Source cover<br />
• Source Linear<br />
• Wafer handling air shower<br />
• Leybold vacuum pumps<br />
• Leak detector port KF25<br />
• Ion source uses vaporizer and<br />
standard gas bottles<br />
• Closed loop D.I. water cooling<br />
system<br />
• Comes with 2 ion sources, 1 8-inch<br />
disk (inside end station), manuals<br />
and documentation<br />
• Gases used: BF3, Arsenic (from<br />
vaporizer), Phosphorus, Silicon<br />
Tetrafluoride, Argon, and<br />
Germanium Tetrafluoride<br />
EATON NV 10-160 High Current<br />
Ion Implanter<br />
Serial Number 071<br />
• Currently configured for 6-inch<br />
• Console hours 89,735.02<br />
• Source hours 52,855.52<br />
• Scans 75,159.4<br />
• Disk exchange 161,478<br />
• Extraction H.V. hours 45,765.72<br />
• Accel H.V. hours 09,765.10<br />
• Vacuum controller, rev C 9/84<br />
• AMU controller, rev B 8/84<br />
• Dose controller, software dose 401<br />
rev E<br />
• DC rack<br />
• EMO controller<br />
• Scope, Standard H.P.<br />
• Datalock, system version 1.2<br />
• Beam controller, CRT<br />
6<br />
• Surge protection<br />
• Gas box<br />
• Source, white<br />
• Diffusion pump, Varian type<br />
• Extraction electrode (single)<br />
• AT-4 belt driven, carousel upgraded<br />
to 6-inch<br />
• AT-4 software rev C, 1995<br />
• Electron shower type 1<br />
• Leybold mechanical pumps<br />
• Accel H.V.P.S. type Kaiser, rev W<br />
System was manufactured in 1984. It<br />
has received several upgrades and has<br />
been well maintained. The system<br />
was deinstalled, packaged and crated<br />
in July 1997 and resides in warehouse<br />
in the UK. to inspect this item in the<br />
UK, please call Doug Berman at<br />
650.377.2628.<br />
Spare Parts List<br />
• 1 spare disk<br />
• 3 ion sources (one in implant<br />
system), Bernas white source with<br />
vaporizer<br />
• 1 complete spare electrode assembly<br />
• 1 complete faraday flag assembly<br />
• 1 complete electron shower<br />
assembly<br />
• 1 NesLab disk water chiller<br />
• 1 spare 6-inch 0º 2 point clamped<br />
disk with vacuum hub and red RTV<br />
• 2 spare source adapters<br />
• 2 spare source liners<br />
• 1 spare extraction bushing<br />
• 1 spare disk liner<br />
• CTI Cryo Torr 8 high vacuum<br />
pumps<br />
• All disks are 0º<br />
Machine cosmetic panels and doors<br />
are in excellent condition. Stainless<br />
steel end station grate and panels.<br />
4.4E-7 Source, 5.7E-7 Beamline,<br />
2.0E-7 Disk. Cycled wafers load and<br />
unload on AT-4.<br />
@<br />
Bid online www.dovebid.com
LEYBOLD M8-95<br />
Circulus Sputter System<br />
Preview Location – Milpitas<br />
Serial Numbers 1148 and 1149<br />
• System new in 1991<br />
• Cassette-to-cassette<br />
• Polycold PFC-1000LT chiller<br />
• 6 cabinets<br />
• 10 Leybold 360 turbo pumps<br />
with controllers<br />
• 6 Advanced Energy MDX-2.5K<br />
DC power supplies<br />
• 2 Advanced Energy MDX-500<br />
Bias power supplies<br />
• 4 Advanced Energy MDX-5K<br />
DC power supplies<br />
Nicolet 560 Magna-IR Optical Bench<br />
Spetrometer with Pentium Computer,<br />
Quantity 4, Preview Location – Comdisco<br />
N&K 1200 Film Thickness Measurement<br />
Analyzer with Pentium Computer, Serial Number<br />
US5340346, Preview Location – Comdisco<br />
DISK DRIVE EQUIPMENT<br />
KLA 5700 Thin Film Head System<br />
Serial Number 231& 261<br />
Quantity 2<br />
Preview Location – Comdisco<br />
• Extended height software<br />
• KLA 5501 analysis station<br />
• Line program edit software<br />
• Array target software<br />
• Option package 25XX line printer<br />
• Autoloader for TFH machine<br />
7<br />
Advance Imaging Robo 4,<br />
Quantity 3<br />
Preview Location – Comdisco<br />
(2 crated)<br />
Spectrace, Quan/X-Ray Measurement System,<br />
Serial Number 28216-001<br />
ALSO AVAILABLE:<br />
PHASE METRICS MC 950<br />
Burnish / Glide / Certification System<br />
Preview Location – Milpitas (crated)<br />
• High throughput step and repeat certification method<br />
• 50 MHz test frequency<br />
• Established standard for low glide technology<br />
• Certification using drive compatible heads (MR and Inductive)<br />
• Software selectable modes include spiral or step burnish/glide operations<br />
• Test sequences can be easily created and modified by utilizing the<br />
graphically based test editor<br />
• Full menu of analysis tools for R&D and QA applications<br />
PHASE METRICS MSA 900/950<br />
Burnish / Glide Systems<br />
Preview Location – Milpitas (crated)<br />
• Industry standard glide test system<br />
• Sub-2.0 micron flying heights<br />
• Dual, independent air bearing spindles<br />
• Real-time display of test results, yield summaries and system status<br />
• Software tools allow development of detailed electronic surface<br />
characterization, providing an invaluable tool for asperity analysis<br />
• User-specified sorting criteria are established based upon actual glide<br />
results<br />
• Burnish, reburnish, scrub and retest capabilities to remove asperities and<br />
increase yields are user programmable
METROLOGY<br />
KLA 5011 Coherence Probe Metrology<br />
Quantity 2<br />
Preview Location – Comdisco<br />
• Fully automated system performing user<br />
defined metrology measurements on<br />
multilayer integrated circuit product wafers<br />
• Wafer Diameter (mm) 100, 125, 150, 200<br />
• Fully automatic, non-contact wafer alignment<br />
using image recognition without requirement<br />
for special test sites<br />
ALSO AVAILABLE:<br />
CFM TECHNOLOGIES Cleaning System<br />
Serial Number 1110<br />
• Cleaning system with 2 each 6"/100 wafer vessels<br />
• Control module<br />
• IPA module<br />
• 2 Injection modules – one 4 chemical injection<br />
module and one 2 chemical injection module<br />
• Dual vessel DI mix assembly module<br />
• Dual vessel degassifier module<br />
• 2 Automated linear arms<br />
• Megasonic system<br />
• 2 DI water heaters<br />
• 3 Data logging<br />
• 1 Chemical dispense system<br />
<strong>Auction</strong><br />
Thursday, February 8, 2001<br />
10am PT<br />
<strong>Auction</strong> Location<br />
Comdisco Electronics<br />
3775 North 1st Street<br />
San Jose, CA 95134<br />
DEPOSITION<br />
VARIAN 3180 Sputtering Systems<br />
Quantity 2<br />
Preview Location – Milpitas<br />
• Configured for 100mm wafer<br />
• 3 each Conmag-II sources<br />
• Varian multi-range DC power<br />
supplies, currently 12kw, 12kw<br />
and 6kw<br />
• RF plasma products RF-10 power<br />
supply<br />
• Eurotherm wafer heater controllers<br />
• Fluke 1722A controller<br />
• Fluke 8840A multimeter<br />
• Varian 880 RS vacuum ionization gauge<br />
• Cryo pump with water cooled compressor<br />
• All necessary mechanical pumps and cables<br />
• Manual set<br />
All equipment is offered subject to availability or prior sale. This item<br />
will be quoted based upon the specific configuration, terms and<br />
conditions required.<br />
Interested parties may contact Daryl Karczewski, Sales Manager, at<br />
Comdisco Electronics Group for additional information at<br />
(512) 719-1627 respectively<br />
8<br />
ETCH EQUIPMENT<br />
Preview Location: Mayflower<br />
Reliance XE - XT 100HP Motor,<br />
3Phase, 1760RPM<br />
Description for DSCF0017,<br />
Marathon Electric<br />
2MV215TFC8026AV X, 10HP,<br />
1750RPM, 26 AMP, 230Volts,<br />
3Phase<br />
@<br />
Bid online<br />
www.dovebid.com<br />
LAM 490 Nitride (Plasma)<br />
Etcher With (2) Leybold Hereus<br />
Trivac Pumps Mod. D30AC, Cat<br />
#898048, Leybold Hereus Ruvac<br />
Mod. WSU250, Cat # 899076;<br />
Leybold Hereus Oil Filter System<br />
#OF1000C
Fuji GSP2-4000 Adhesives Dispensing<br />
System, s/n 1458, Preview Location –<br />
Milpitas<br />
DEK-265 Mark I Screen Printer,<br />
s/n 95669,<br />
Preview Location – Comdisco<br />
SURFACE MOUNT EQUIPMENT<br />
Hepco 5600-22-PLSP2 Cut Form<br />
Die/Set, Preview Location – Milpitas<br />
Data I/O ProMaster 9500 Automated<br />
Handling System, s/n 21016584<br />
Preview Location – Comdisco<br />
EMC Global Tech Spirit-30 IPA<br />
Stencil Cleaner,<br />
Preview Location – Milpitas<br />
ALSO AVAILABLE:<br />
• Universal Board Flo 5423A Magazine<br />
Loader/Unloader System<br />
Preview Location – Milpitas<br />
TEST AND MEASUREMENT - Preview Location: Mayflower<br />
Specialty Mayflower<br />
Moving & Storage<br />
1732 Rogers Ave<br />
San Jose, CA 95112<br />
Preview Location Code –<br />
Mayflower<br />
Take 101 South Toward San Jose.<br />
Take the First St. Exit and Turn left<br />
at the first traffic signal on to<br />
Brokaw Rd. Stay on Brokaw cross<br />
First St. turn right on to Rogers<br />
Ct. Specialty Mayflower is located<br />
on the Left Watch for auction<br />
signs.<br />
HP 41501A SMU & Pulse Generator<br />
Expander Analyzer<br />
HP 3577B Network Analyzer,<br />
5Hz - 200Mhz<br />
9<br />
Tektronics 7854 Oscilloscope, (2)<br />
7A26A, (1) 7B92A, (1) 7B80<br />
Tektronix TDS380 400MHz - 2 GS/s<br />
Two Channel Digital Real Time<br />
Oscilliscope
KLA 2606 Review Station Wafer Prober<br />
with Nikon Microscope, BD Plan 60<br />
0.80 210/0; BD Plan 100, 0.90 Dry,<br />
210/0; BD Plan 10, 0.25 Dry, 210/0;<br />
BD Plan 20, 0.4, 210/0; Sony RGB<br />
CCD, PVM1342Q Color Video<br />
Monitor,<br />
Reliance XE - XT 100HP Motor,<br />
3Phase, 1760RPM<br />
WAFER EQUIPMENT - Preview Location: Mayflower<br />
Leitz Ergolux AMC Microscope (Leica), NPL<br />
FLUOTAR 5X DF, NPL FLOUTAR 20X DF,<br />
L50X/0.60 DF, PL LWDM 20 / .40 & Wafer<br />
Handler<br />
Irvine Optical Ultrastation<br />
Model 2 3.B Wafer Inspectio<br />
Microscope with 5X, 10X, 20X,<br />
40X Objective, Qty. 2<br />
PUMPS AND MOTORS - Preview Location: Mayflower<br />
Marathon Electric, 10HP,<br />
2MV215TFC8026AV X, 1750RPM,<br />
26 AMP, 230Volts, 3Phase<br />
10<br />
OlympusBH2-UMA Microscope, Motorized<br />
Objective Movement System, 5X,10X, 20X,<br />
100X Objectives, Light & XY Table<br />
Tokyo Seiden SLC3-3K6S2<br />
Transformer, 36K VA, 200Volt,<br />
50/60 Hz<br />
Edwards QMK II Series<br />
QMKII / QMB 500 Pump<br />
& Blower Package,<br />
s/n M407540 3Phase, 60 Hz,<br />
208Volts 2670 RPM<br />
Micromanipulator<br />
Wafer Probe<br />
(Microscope) No<br />
Lenses & No<br />
Objectives
Preview Location<br />
Specialty Mayflower<br />
Moving & Storage<br />
1732 Rogers Ave<br />
San Jose, CA 95112<br />
Also included in this sale will be 1200+<br />
microscopes and 400+ lenses formerly<br />
owned by Applied Magnetics Korea. Please<br />
inspect.<br />
SCOPE MFG. MODEL SCOPE QTY.<br />
Olympus BH2-UMA BHM 25<br />
Olympus BH2-MA-2 BHM 60<br />
Nikon None BHM 13<br />
Olympus SZ 40x 16<br />
Olympus SZ 40x 9<br />
Nikon 40x 8<br />
Nikon 4x 5<br />
McBain Stereo Zoom 30x 6<br />
Nikon 20x 286<br />
Nikon 20x 14<br />
Kyoa 20x 130<br />
Sel Optical 20x 150<br />
Sel Optical 20x 304<br />
AO 15x 57<br />
McBain Stereo Zoom 15x 6<br />
McBain Stereo Zoom 15x 2<br />
OVER 1200 MICROSCOPES<br />
LENS MFG. TYPE MAGNIFICATION QTY.<br />
Nikon BD Plan 5 5<br />
Olympus Neo 5 3<br />
Olympus NeoDPlan 5 13<br />
Olympus NeoSPlan 5 16<br />
Olympus NeoSPlan 5 (-2) 21<br />
Nikon BD Plan 10 7<br />
Olympus NeoDPlan 10 12<br />
Olympus NeoSPlan 10 31<br />
Olympus NeoSPlan NIC 10 2<br />
Nikon BD Plan 20 1<br />
Olympus NeoSPlan 20 23<br />
Olympus NeoDPlan 20 7<br />
Olympus NeoSPlan NIC 20 4<br />
Nikon Neo 40 1<br />
Olympus NeoSPlan 50 15<br />
Olympus M 5 14<br />
Olympus MD Plan 5 19<br />
Olympus MPlan 5 4<br />
Nikon MPlan 5 4<br />
Olympus MS Plan 5 2<br />
N/A M 5 (/0.1) 5<br />
Olympus M 10 38<br />
Olympus MD Plan 10 20<br />
Nikon MPlan 10 5<br />
Olympus MPlan 10 5<br />
Olympus MS Plan 10 2<br />
Olympus Neo 10 3<br />
Nikon U 10 1<br />
Nikon WSLWD MPlan 10 3<br />
Nikon 10 2<br />
Unitron M 10 (/0.3) 1<br />
Olympus LWD MPlan 20 4<br />
Olympus LWD MSPlan 20 1<br />
Olympus M 20 21<br />
Olympus MD Plan 20 19<br />
Nikon MPlan 20 3<br />
Olympus MPlan 20 5<br />
Nikon ELWD MPlan 40 5<br />
Olympus LWD MPlan 40 3<br />
Olympus MD Plan 40 1<br />
Nikon MPlan 40 1<br />
Olympus MPlan 40 3<br />
Nikon MPlan 40 3<br />
Olympus M 40 45<br />
Olympus MD Plan 80 21<br />
Nikon MPlan 100 3<br />
11