National Gypsum Construction Guide - 12th Edition
National Gypsum Construction Guide - 12th Edition National Gypsum Construction Guide - 12th Edition
"A" DETAILS VENTILATION 1 1/2" C.R. CHANNEL VENTILATOR INSTALLATION CEILING/SOFFIT BOARD RECOMMENDATIONS EXTERIOR SOFFIT BOARD VENTILATION 09250A Scale: 1 1/2" = 1'-0" 72 NATIONAL GYPSUM BOARD PRODUCTS VIEW "A" HANGERS 48" O.C. MAX. FURRING CHANNEL FURRING CHANNEL CLIP Installation of Gold Bond Exterior Soffit Board should be in accordance with page 70 of the National Gypsum Company “Gypsum Construction Guide.” A qualified structural engineer should evaluate design, including uplift bracing. See page 63, Environmental Conditions and Limitations. 1/4" 1/4" TO ROOF VENT SPECIFICATIONS J CASING BEAD FLEXIBLE SEALANT CONTROL JOINT 09250B Scale: 1 1/2" = 1'-0" THE FOLLOWING PARAGRAPHS ARE FOR INSERTION INTO SECTIONS OF GENERIC SPECIFICATIONS OR GENERIC/PROPRIETARY SPECIFICATIONS COVERING GYPSUM BOARD PRODUCTS. THE NATIONAL GYPSUM PRODUCT NAME FOLLOWS THE GENERIC DESCRIPTION IN PARENTHESES. PART 2 PRODUCTS 2.01 MATERIALS A. Exterior Gypsum Soffit Board: A gypsum core soffit board with additives to enhance the sag resistance of the core; surfaced with water repellent paper on front, back, and long edges; and complying with ASTM C 1396 (Gold Bond BRAND Exterior Soffit Board). 1. Thickness: 1/2" 2. Width: 4' 3. Length: 8' through 12' 4. Edges: Beveled Tapered (Sta-Smooth Edge) B. Fire-Resistant Exterior Gypsum Soffit Board: A gypsum core soffit board with additives to enhance the fire resistance of the core; surfaced with water repellent paper on front, back, and long edges; and complying with ASTM C 1396, type X (Gold Bond BRAND Fire-Shield Exterior Soffit Board). 1. Thickness: 5/8" 2. Width: 4' 3. Length: 8' through 12' 4. Edges: Beveled Tapered (Sta-Smooth Edge) PART 3 EXECUTION 3.01 INSTALLATION A. General: In accordance with the manufacturer’s recommendations, National Gypsum Company “Gypsum Construction Guide.”
Gold Bond ® BRAND 1" Fire-Shield ® Shaftliner DESCRIPTION Gold Bond ® BRAND 1" Fire- Shield Shaftliner panels consist of a fire-resistant type X gypsum core encased in a heavy moisture-resistant green, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Long edges of panels are beveled for ease of installation. 1" Shaftliner panels are designed to be used to construct lightweight fire barriers for cavity shafts and area separation walls in multifamily housing. The panels are key components in the Cavity Shaftwall Systems and the I-Stud and H-Stud Area Separation Wall Systems. TECHNICAL DATA SURFACE BURNING CHARACTERISTICS ASTM E84 Flame Spread: 15 Smoke Developed: 0 WEIGHTS 1" Shaftliner - 3.75 lbs/SF FIRE RESISTANCE RATINGS Fire resistance ratings represent the results of tests on assemblies made up of materials authorized by National Gypsum in specific configurations. When selecting construction designs to meet certain fire requirements, caution must be used to ensure that each component of the assembly is the one specified in the test. Further, precaution should be taken that assembly procedures are in accordance with those of the tested assembly. (For copies of specific tests, call 1-800- NATIONAL.) RECOMMENDATIONS Installation of 1" Fire-Shield Shaftliner should be consistent with methods described in specific application details for Cavity Shaftwall Systems or H-Stud Area Separation Wall Systems or other fire-rated designs shown in National Gypsum Company “Gypsum Construction Guide.” Exposure to excessive or continuous moisture or standing water and extreme temperatures should be avoided. To prevent weakening due to calcining, 1" Fire-Shield Shaftliner panels, like any gypsum board, should not be exposed to temperatures over 125˚F (52˚C) for extended periods of time. Not to be used in an unlined air supply duct. Always store Shaftliner Gypsum Panels flat on a level surface and support with properly placed risers. Care should be taken to avoid impact, unwarranted flexing and subsequent damage to board edges, ends and corners. SPECIFICATIONS THE FOLLOWING PARAGRAPHS ARE FOR INSERTION INTO SECTIONS OF GENERIC SPECIFICATIONS OR GENERIC/PROPRIETARY SPECIFICATIONS COVERING GYPSUM BOARD PRODUCTS. THE NATIONAL GYPSUM PRODUCT NAME FOLLOWS THE GENERIC DESCRIPTION IN PARENTHESES. PART 2 PRODUCTS 2.01 MATERIALS A. Fire-Resistant Gypsum Shaftliner Board: A gypsum core shaftwall board with additives to enhance fire resistance of the core and surfaced with water resistant paper on front, back and long edges; and complying with ASTM C 1396, type X (Gold Bond BRAND Fire- Shield Shaftliner). 1. Thickness: 1" 2. Width: 2' 3. Length: 7' through 14' 4. Edges: Beveled PART 3 EXECUTION 3.01 INSTALLATION A. General: In accordance with the manufacturer’s recommendations, National Gypsum Company “Gypsum Construction Guide.” 09 29 00/NGC NATIONAL GYPSUM BOARD PRODUCTS 73 09 29 00
- Page 23 and 24: QUICK SELECTOR FOR FIRE AND SOUND R
- Page 25 and 26: QUICK SELECTOR FOR FIRE AND SOUND R
- Page 27 and 28: GENERAL REFERENCE Gypsum Board Floo
- Page 29 and 30: 12 TH EDITION 06 16 43/NGC Gold Bon
- Page 31 and 32: LIMITATIONS 1. Gypsum Sheathing is
- Page 33 and 34: GOLD BOND ® BRAND e 2 XP EXTENDED
- Page 35 and 36: 12 TH EDITION Conventional Plaster
- Page 37 and 38: Basecoat Plasters DESCRIPTION GOLD
- Page 39 and 40: Gypsum Plaster Base/Wood Framing DE
- Page 41 and 42: Fireproofing Columns and Beams with
- Page 43 and 44: 3/4" C.R. CHANNEL METAL LATH 66 CAS
- Page 45 and 46: 12 TH EDITION Veneer Plaster System
- Page 47 and 48: Veneer Plaster System Components TE
- Page 49 and 50: Veneer Plaster Accessories* Used in
- Page 51 and 52: DETAILS KAL-KORE KAL-MESH KAL-KOTE
- Page 53 and 54: STA-SMOOTH PAPER TAPE TREATMENT MET
- Page 55 and 56: Veneer plaster walls are particular
- Page 57 and 58: KAL-MESH INSTALLATION 1" X 4" BRIDG
- Page 59 and 60: 12 TH EDITION Gypsum Board Systems
- Page 61 and 62: STA-SMOOTH ® STA-SMOOTH ® STA-SMO
- Page 63 and 64: HIGH STRENGTH BRAND HIGH STRENGTH
- Page 65 and 66: METRIC CAPABILITIES The Federal Gov
- Page 67 and 68: Gold Bond ® BRAND Gypsum Board DES
- Page 69 and 70: Gold Bond ® BRAND Sta-Smooth ® Gy
- Page 71 and 72: INSTALLATION Application And Fasten
- Page 73: Gold Bond ® BRAND Exterior Soffit
- Page 77 and 78: Gold Bond ® BRAND High Flex ® Gyp
- Page 79 and 80: Gold Bond ® BRAND High Strength Ce
- Page 81 and 82: SURFACE BURNING CHARACTERISTICS AST
- Page 83 and 84: Gold Bond ® BRAND Hi-Impact XP ®
- Page 85 and 86: Exposure to excessive or continuous
- Page 87 and 88: RECOMMENDATIONS Installation of Sou
- Page 89 and 90: PACKAGING 2' x 2' - 4 pcs./bundle,
- Page 91 and 92: Gold Bond ® BRAND Foil Back Gypsum
- Page 93 and 94: Table 1 25 GAUGE STUDS/PARTITION LI
- Page 95 and 96: Drywall Metal Framing* 25 & 20 GAUG
- Page 97 and 98: DETAILS STUD SPLICE 16" LENGTH OF T
- Page 99 and 100: RECOMMENDATIONS 1. FRAMING Align fl
- Page 101 and 102: Steel Frame Ceilings/Furring Channe
- Page 103 and 104: Wood Frame Walls and Ceilings/Singl
- Page 105 and 106: TECHNICAL DATA 09 29 00/NGC FASTENE
- Page 107 and 108: 2. Laminating is an excellent way t
- Page 109 and 110: INSTALLATION SPLICE ON JOIST 1 1/4"
- Page 111 and 112: RECOMMENDATIONS Z FURRING 1. Begin
- Page 113 and 114: STEEL JAMB 1" FIRE-SHIELD SHAFTLINE
- Page 115 and 116: ProForm BRAND Taping Joint Compound
- Page 117 and 118: ProForm ® BRAND Texture Products D
- Page 119 and 120: RECOMMENDATIONS A. For specific rec
- Page 121 and 122: LEVEL 5 All joints and interior ang
- Page 123 and 124: D.Fire-Resistant Mold-Resistant Gyp
Gold Bond ® BRAND 1" Fire-Shield ® Shaftliner<br />
DESCRIPTION<br />
Gold Bond ® BRAND 1" Fire-<br />
Shield Shaftliner panels<br />
consist of a fire-resistant<br />
type X gypsum core<br />
encased in a heavy<br />
moisture-resistant green,<br />
100% recycled paper on<br />
the face and back sides.<br />
The face paper is folded<br />
around the long edges to<br />
reinforce and protect the<br />
core, and the ends are<br />
square-cut and finished<br />
smooth. Long edges of<br />
panels are beveled for ease<br />
of installation.<br />
1" Shaftliner panels are<br />
designed to be used to<br />
construct lightweight fire<br />
barriers for cavity shafts<br />
and area separation walls<br />
in multifamily housing. The<br />
panels are key components<br />
in the Cavity Shaftwall<br />
Systems and the I-Stud<br />
and H-Stud Area<br />
Separation Wall Systems.<br />
TECHNICAL DATA<br />
SURFACE BURNING<br />
CHARACTERISTICS<br />
ASTM E84<br />
Flame Spread: 15<br />
Smoke Developed: 0<br />
WEIGHTS<br />
1" Shaftliner - 3.75 lbs/SF<br />
FIRE RESISTANCE RATINGS<br />
Fire resistance ratings represent<br />
the results of tests on<br />
assemblies made up of<br />
materials authorized by<br />
<strong>National</strong> <strong>Gypsum</strong> in specific<br />
configurations. When<br />
selecting construction<br />
designs to meet certain fire<br />
requirements, caution must<br />
be used to ensure that each<br />
component of the assembly<br />
is the one specified in the<br />
test.<br />
Further, precaution should be<br />
taken that assembly<br />
procedures are in accordance<br />
with those of the<br />
tested assembly. (For copies<br />
of specific tests, call 1-800-<br />
NATIONAL.)<br />
RECOMMENDATIONS<br />
Installation of 1" Fire-Shield<br />
Shaftliner should be<br />
consistent with methods<br />
described in specific<br />
application details for Cavity<br />
Shaftwall Systems or H-Stud<br />
Area Separation Wall<br />
Systems or other fire-rated<br />
designs shown in <strong>National</strong><br />
<strong>Gypsum</strong> Company “<strong>Gypsum</strong><br />
<strong>Construction</strong> <strong>Guide</strong>.”<br />
Exposure to excessive or<br />
continuous moisture or<br />
standing water and extreme<br />
temperatures should be<br />
avoided.<br />
To prevent weakening due to<br />
calcining, 1" Fire-Shield<br />
Shaftliner panels, like any<br />
gypsum board, should not<br />
be exposed to temperatures<br />
over 125˚F (52˚C) for<br />
extended periods of time.<br />
Not to be used in an unlined<br />
air supply duct.<br />
Always store Shaftliner <strong>Gypsum</strong><br />
Panels flat on a level surface<br />
and support with properly<br />
placed risers. Care should be<br />
taken to avoid impact,<br />
unwarranted flexing and<br />
subsequent damage to board<br />
edges, ends and corners.<br />
SPECIFICATIONS<br />
THE FOLLOWING PARAGRAPHS ARE<br />
FOR INSERTION INTO SECTIONS<br />
OF GENERIC SPECIFICATIONS OR<br />
GENERIC/PROPRIETARY<br />
SPECIFICATIONS COVERING<br />
GYPSUM BOARD PRODUCTS.<br />
THE NATIONAL GYPSUM<br />
PRODUCT NAME FOLLOWS THE<br />
GENERIC DESCRIPTION IN<br />
PARENTHESES.<br />
PART 2 PRODUCTS<br />
2.01 MATERIALS<br />
A. Fire-Resistant <strong>Gypsum</strong><br />
Shaftliner Board: A<br />
gypsum core shaftwall<br />
board with additives to<br />
enhance fire resistance of<br />
the core and surfaced with<br />
water resistant paper on<br />
front, back and long<br />
edges; and complying with<br />
ASTM C 1396, type X<br />
(Gold Bond BRAND Fire-<br />
Shield Shaftliner).<br />
1. Thickness: 1"<br />
2. Width: 2'<br />
3. Length: 7' through 14'<br />
4. Edges: Beveled<br />
PART 3 EXECUTION<br />
3.01 INSTALLATION<br />
A. General: In accordance<br />
with the manufacturer’s<br />
recommendations,<br />
<strong>National</strong> <strong>Gypsum</strong><br />
Company “<strong>Gypsum</strong><br />
<strong>Construction</strong> <strong>Guide</strong>.”<br />
09 29 00/NGC<br />
NATIONAL GYPSUM BOARD PRODUCTS<br />
73<br />
09 29 00