COLD FINISHED
CARBON STEEL BARS COLD FINISHED - Alro Steel Corporation
CARBON STEEL BARS COLD FINISHED - Alro Steel Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Alro Steel<br />
Metals • Industrial Supplies • Plastics<br />
Production/Precision Sawing<br />
Length<br />
Your Product Cut To Precision<br />
Squareness Surface Finish<br />
Angle Iron<br />
Square Tubing<br />
Squares<br />
Hex<br />
Round Tubing<br />
Rounds<br />
Channel<br />
Flat Bar<br />
Our Processing Services Produce:<br />
• Tighter tolerances which can reduce or eliminate machine time<br />
• Square, near burr-free cuts for reduced machining clean-up<br />
• Surface Finish with a Low Ra (Roughness Average)<br />
Cutting Capacities<br />
Non Ferrous<br />
Cold Saws<br />
Carbon Steel<br />
Cold Saws<br />
Precision Cut<br />
Band Saws<br />
• Aluminum<br />
• Brass<br />
• Copper<br />
• Plastic<br />
• Alloys<br />
• Stainless Steel<br />
• Tool Steel<br />
• Carbon Steel<br />
• Alloys<br />
• Stainless Steel<br />
• Tool Steel<br />
• Carbon Steel<br />
Rounds .375” to 3.5” .375” to 7” up to 20”<br />
Squares .250” to 3.5” .250” to 6.25” up to 20”<br />
Rd. Pipe/Tube .375” to 3.5” .375” to 7” up to 20”<br />
Sq. Pipe/Tube .375” to 3.5” .375” to 6.25” up to 20”<br />
Cut Length .250” to 24” .300” to 48” .187” to 36”<br />
Length Tolerance + or - .004” + or - .004” + or - .010”<br />
2-18<br />
This is a guideline only. Tolerance may vary depending on material.<br />
888-888-ALRO<br />
2 5 7 6
Change language