BMT-2098C-A_USER MANUAL-ANALOG LINE SCAN CAMERA

More documents

Recommendations

Info

Tri-Linear Series: BMT-2098C-A User Manual Figure 8 CLKOUT delay vs. Analog output (0T, 0.25T, 0.5T, 0.75T) 2014-15 Copyright BalaJi MicroTechnologies Pvt. Ltd. Page 16
Tri-Linear Series: BMT-2098C-A User Manual 3.5 Camera reset & save configuration Using “T=1” command to perform a internal logic reset of the camera. Information! Recommend using reset command after changing the working mode or setting of internal clock frequency change. Using “W=1” command will store all current settings to internal memory, when the camera is power off and on again, the setting will automatic restore from the internal memory. 3.6 Gain & offset adjust The camera has total 6 of potentiometers, 2 of each is pair for adjusting gain and offset of each color channel, please refer to below image for the position of each potentiometer. Figure 9 Gain and offset potentiometers Potentiometer Direction Description Gain ↻ ↺ Increase Gain (More sensitivity) Decrease Gain (Less sensitivity) 2014-15 Copyright BalaJi MicroTechnologies Pvt. Ltd. Page 17
Page 1 and 2: Tri-Linear Series: BMT-2098C-A User
Page 15: Tri-Linear Series: BMT-2098C-A User

BMT-2098C-A_USER MANUAL-ANALOG LINE SCAN CAMERA

Create successful ePaper yourself

Delete template?

Save as template?