Network UPS Tools User Manual

Network UPS Tools User Manual 55 / 84
Name
frequency
frequency.nominal
realpower
power
Description
Frequency (Hz)
Nominal frequency (Hz)
Current value of real power (Watts)
Current value of apparent power (Volt-Amps)
C.1.6
EXAMPLES
Partial Three phase - Three phase example:
input.phases: 3
input.frequency: 50.0
input.L1.current: 133.0
input.bypass.L1-L2.voltage: 398.3
output.phases: 3
output.L1.power: 35700
output.powerfactor: 0.82
Partial Three phase - One phase example:
input.phases: 3
input.L2.current: 48.2
input.N.current: 3.4
input.L3-L1.voltage: 405.4
input.frequency: 50.1
output.phases: 1
output.current: 244.2
output.voltage: 120
output.frequency.nominal: 60.0
C.1.7
battery: Any battery details
Name Description Example value
battery.charge Battery charge (percent) 100.0
battery.charge.low
Remaining battery level when UPS 20
switches to LB (percent)
battery.charge.restart
Minimum battery level for UPS restart 20
after power-off
battery.charge.warning
Battery level when UPS switches to 50
"Warning" state (percent)
battery.voltage Battery voltage (V) 24.84
battery.voltage.nominal Nominal battery voltage (V) 024
battery.voltage.low
Minimum battery voltage, that triggers 21,52
FSD status
battery.voltage.high
Maximum battery voltage (i.e. 26,9
battery.charge = 100)
battery.capacity Battery capacity (Ah) 7.2
battery.current Battery current (A) 1.19
battery.current.total Total battery current (A) 1.19
battery.temperature Battery temperature (degrees C) 050.7
battery.runtime Battery runtime (seconds) 1080
battery.runtime.low
Remaining battery runtime when UPS 180
switches to LB (seconds)
battery.runtime.restart
Minimum battery runtime for UPS
restart after power-off (seconds)
120