Hohmann & Barnard catalog Reed First Source - Reed Construction ...
Hohmann & Barnard catalog Reed First Source - Reed Construction ...
Hohmann & Barnard catalog Reed First Source - Reed Construction ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section A - Masonry Systems<br />
TRUSS Type<br />
#120 Truss-Mesh<br />
Single Wythe Wall<br />
LADDER Type<br />
#220 Ladder-Mesh<br />
Single Wythe Wall<br />
#130 Truss-Tri-Mesh<br />
Composite Wall<br />
#230 Ladder-Tri-Mesh<br />
Composite Wall<br />
#140 Truss-Twin-Mesh<br />
Composite Wall<br />
#240 Ladder-Twin-Mesh<br />
Composite Wall<br />
<strong>Hohmann</strong> & <strong>Barnard</strong>’s Lox-All ® Truss-Mesh and Ladder-Mesh are continuous lengths<br />
of joint reinforcement that are embedded into the horizontal mortar joint of masonry<br />
walls. Joint reinforcement has long proven to be necessary for superior performance<br />
of masonry wall construction.<br />
.<br />
.<br />
.<br />
Benefits:<br />
.<br />
Greatly reduces cracking that can arise from thermal stresses. This enhances<br />
resistance to water penetration, as cracks are controlled.<br />
Increases lateral flexural strength.<br />
Bonds exterior and interior masonry wythes together in composite or cavity<br />
walls. Also bonds masonry at intersecting walls and corners.<br />
Increases elasticity and performance of masonry walls under various stresses.<br />
Features:<br />
.<br />
A4<br />
Lox All ® Reinforcement<br />
Butt-welding of cross rods to longitudinal rods (not more than 16”o.c.). This construction<br />
enhances bonding capabilities, eliminates projection of cross rods<br />
beyond the specified width of reinforcement, and prevents excessive build up of<br />
wire in limited mortar joints.<br />
Continuous deformation along each longitudinal rod for superior bonding performance.<br />
#150 Truss-Box-Mesh<br />
Composite Wall<br />
#250 Ladder-Box-Mesh<br />
Composite Wall<br />
Standard Sizes:<br />
4” wall - 16” wall. Other widths<br />
available on special request.<br />
(S) Standard:<br />
9 ga. side rods x 9 ga. cross rods<br />
(EH) Extra Heavy:<br />
3/16” side rods x 9 ga. cross rods<br />
(SHD) Super Heavy Duty:<br />
3/16” side rods x 3/16” cross rods<br />
Finishes: Mill Galv, Hot Galv or<br />
Stainless Steel<br />
H&B products conform to ASTM<br />
A951 standard specification for<br />
masonry joint reinforcement.<br />
H&B manufactures steel wire products from a minumun of<br />
Stainless Steel recycled content see page 22<br />
95 post industrial recycled material.<br />
%<br />
For material conformances, submittal sheets, CAD drawings and MSDS sheets see WWW.H-B.COM<br />
.<br />
H& B recommends Type 304 Stainless Steel for maximum protection against corrosion.
Change language