Kennedy Hardware

Hoosier Cabinet Hardware
Lever Latches
Replacements for the lever type latches used on Boone,
Sellers, Napanee and other cabinets. Both the latch and
the catch are cast brass. Latch base is 1-9/16” High x
3/4” Wide. Overall Length: 2-3/4”
Catches
Elbow Catch
Hidden catch for doors without an external latch.
When two doors meet an elbow catch is used to
hold the left door closed. The latch on the right
door engages the catch mounted on the left door.
BP-93 Brass Plated
BP-93A Bronze
BP-93N Nickel Plated
Left
Right
Lever Latches with Flush Catches
Lever latch with flush catch. Use this latch for applications
that require a flush catch. Catch base is 1-9/16”
High x 3/4” Wide.
KC-14 Polished Brass Left Latch with Flush Catch
KC-14N Nickel Plated Left Latch with Flush Catch
KC-15 Polished Brass Right Latch with Flush Catch
KC-15N Nickel Plated Right Latch with Flush Catch
BP-48
BP-94
Door Catches
Catches for doors without an external latch. Latch
mounts on underside of shelf and catch mounts
on inside of door.
BP-48 Spring Steel. Brass Plated
BP-94 Spring Loaded. Zinc Plated Steel
Extra Catches for Hoosier Latches
Left
Right
Set of four catches for many Hoosier type latches.
Designed to be used with either left or right latches.
Includes two flush catches and two offset catches.
I-23M Polished Brass
Catches for Seller “S” Latches
Lever Latches with Offset Catch
Lever latch with 3/8” offset catch. Use this latch for applications
that require an offset catch. Catch base is 1-5/8”
High x 1/4” Wide.
KC-16 Polished Brass Left Latch with Offset Catch
KC-16N Nickel Plated Left Latch with Offset Catch
KC-17 Polished Brass Right Latch with Offset Catch
KC-17N Nickel Plated Right Latch with Offset
Replacement catches for Sellers “S” latches.
Can be used with left or right latches. Includes
one flush catch and one 3/8” offset catch.
I-50S Polished Brass
I-50SN Nickel Plated
7