Kennedy Hardware

Pressed Fiberboard Seats
These fiberboard seats are pressed from original turn-of-the-century dies. The light reddish tan material has a
leather-like appearance that can be stained, varnished, or painted. Seats can be trimmed easily with shears, a
band saw, or a knife to the desired size. Install fiberboard seats using seat nails spaced 1” to 1-1/2” apart.
S-3012 Nesting Birds
Untrimmed Size: 14-1/2” x 14-1/2”
Minimum Trimmed Size:
12” Diameter
S-3022 Bows
Untrimmed Size: 14-1/2” x 14-1/2”
Minimum Trimmed Size:
Front: 12-3/4”
Back: 11-1/4”
Depth: 11-3/4”
S-3024 Small Daisy Seat
Untrimmed Size: 12-1/2” x 12-1/2”
Minimum Trimmed Size:
Front 10”, Rear 9”, Depth: 10”
S-3080 Fleur-De-lis
Untrimmed Size: 14-1/2” x 14-1/2”
Minimum Trimmed Size:
Front: 14-1/4”
Back: 12-3/4”
Depth: 13-1/4”
S-3040 Shield
Untrimmed Size: 14-1/2” x 14-1/2”
Minimum Trimmed Size:
Front: 12-1/2”
Back: 11”
Depth: 12-1/4”
S-3070 Fleur-De-Lis
Untrimmed Size: 14-1/2” x 14-1/2”
Minimum Trimmed Size:
12” Diameter
S-3018 Extra Large Fleur-De-Lis
Untrimmed Size: 18” x 18”
Minimum Trimmed Size:
15-1/2” Diameter
S-3300 Quilted Pattern
Untrimmed Size: 15-3/4” x 15-3/4”
Minimum Trimmed Size:
Front: 13-1/4”
Back: 10-1/2”
Depth: 12-3/8”
63