Kennedy Hardware

Chair Parts
Decorative nails for fiberboard seats.
Sold in packages of 50 or boxes of 1000.
O-24 Oak Chair Spindle
Turned Oak chair spindles. Overall Length: 11-1/4”
Maximum Diameter: 7/8”, Tenon Diameter: 3/8”
Morris Chair Parts
S-1042 Seat Nail
Plain French Finish
3/4” Long
TKN-5 Decorative Nail
7/16” Woven Head
5/8” Long
TKN-6 Decorative Nail
1/2” Daisy Head
1/2” Long
TKN-7 Decorative Nail
1/2” Hammered Head
3/4” Long
L-48R
L-49E
Morris Chair Brackets
Brass plated cast iron replacement brackets for the
backs of Morris chairs. These brackets are made to
accommodate most Morris chair configuration curves.
Each bracket is 6-5/8” Long x 3/4” Wide. Sold in pairs.
L-49E Polished Brass
L-49EAB Antique Brass
Morris Chair Rods
Brass plated steel Morris chair rod with 1” diameter
ball terminal finials. 3/8” diameter rod is 26-1/4” Long.
Terminals are held in place with set screws which
allow them to be removed so that rod can be trimmed
to desired length.
L-48R Polished Brass
L-48RAB Antique Brass
RS-42 Platform Rocker Springs
Replacement springs for platform rocking
chairs. Base is 5” x 3-1/2”. Overall height of
spring is 2-1/4”. Sold in pairs.
OC-27 HIP Rest Clips
Used to mount oak hip rests to chair. Antiqued
steel. 1” Long x 11/16” Wide x 1/2” High. Screw
hole diameter: 1/4”. Sold in sets of 4 clips. Screws
included.
O-20 Oak Hip Rests
Replacement hip rests for oak chairs. One end
is flat to fit chair seat and the other end is curved
to fit the chair back. Approximately 6-1/2” high.
Sold in pairs.
62