Kennedy Hardware

Miscellaneous Hardware
Mirror Supports
Nylon Furniture Glides
MS-5 Mirror Supports
American style mounting hinges for
mirrors. Brass plated steel. One pair
mounts one mirror. Sold in pairs.
Each Clamp: 1-1/4” x 3/4”
Pin: 2” Long x 1/4” Dia.
Overall size: 2” x 1-1/4”
MS-7
M-108 Desk Lid Support
Heavy duty replacement lid supports
for drop front desks, blanket chests
and similar applications. Brass plated
steel. Sold in pairs (Right and Left).
Overall Length: 10-3/8” Arm Width:
9/16”
Shelf Rests
GL-10 5/8” Diameter, 5/8” Nail
GL-20 3/4” Diameter, 3/4” Nail
GL-30 7/8” Diameter, 3/4” Nail
Sold by the Dozen, 100, or 1000
Dozen
100
1000
GL-10
GL-20
GL-30
GL-10C
GL-20C
GL-30C
Bullet Catches
GL-10M
GL-20M
GL-30M
MS-7AB
Friction Mirror Supports
Steel friction hinges for mirrors. One
set mounts one mirror. Sold in pairs.
Each Clamp: 1-1/2” x 1/2”
Pin: 2” Long x 1/4” Dia.
Overall size: 2” x 1-1/2”
MS-7 Brass Plated
MS-7AB Antique Bronze Finish
Brass Plated Steel
Requires 1/4” Diameter Hole
BP-83 Package of Dozen
BP-83C Package of 100
Spoon type. Brass plated steel.
Requires 1/4” Diameter Hole
BP-85 Package of Dozen
BP-85C Package of 100
Drawer Stops
Sold by the Dozen
Brass Plated Bullet Catches
BP-95 1/4” Diameter
BP-96 3/8” Diameter
Friction Catches
BP-94 Spring Catch
Spring loaded friction catch for doors
without an external latch. Zinc plated
steel.
M-5B Cheval Mirror Support
Complete set for mounting swing
mirror. Includes cast brass rings,
brass friction washers, threaded
brass inserts and two lengths of
screws (2-1/4” and 3-1/2”).
Ring diameter: 1-1/4”
DS-1 Drawer Stops
Double-pointed drawer stops.
3/4” Wide x 11/16” High
DS- 2 Drawer Stops
Reproduction of drawer stops
used on most American oak furniture.
3/4” Wide x 11/16” High
BP-48 Friction Catch
Spring steel friction catch for doors
without an external latch. Brass
plated. Catch: 1” x 3/4”
Clip: 1-1/4” x 5/16”
Brass Flat Hooks
H-22 1” Long
H-24 1-1/2” Long
54