Kennedy Hardware

Locks
Flush Mounted Steel Locks
Two way keyhole allows lock to be
mounted inside door or drawer. Bolt
throws left or right so that lock can
be used on left or right doors. Brass
plated steel.
Heavy Flush Mounted Lock
Roll Top Desk Locks
L-1B 1” Wide x 1-3/4” High.
Includes brass plated key and
brass keyhole cover.
This heavy flush mounted steel lock
can be used for left or right doors.It is
perfect for armoires, wardrobes or
other large cabinets. The lock can
also be used for large drawers. Plain
steel with nickel plated key.
L-4 2-1/8” Wide x 3-1/2” High
Lock for Clock Case
or Curio Cabinet
LRT-4 Roll Top Desk Lock
Square cornered roll top lock used
to restore antique desks. Includes
lock, receiver, keyhole cover and two
keys.
Lock Plate: 3-1/4” x 5/8”
Lock Body: 1-3/4” x 1-3/8”
Receiver: 2-3/8” x 13/16”
Keyhole Cover: 3-3/4” x 1-3/8”
L-3B 1-3/16” Wide x 2-5/8” High.
Includes two brass plated keys.
Narrow lock for clock cases or curio
cabinets. Can be used for left or right
doors. Lock case is 13/16” Wide x 2”
High. Overall height tip to tip is 2-7/8”
Antique bronze finish with die cast
key.
L-5 Lock
Full-Mortise Lock
LRT-6 Roll Top Desk Lock
Round cornered lock for new desks.
Includes lock, receiver and two keys.
Keyhole cover not included.
Lock Plate: 3-3/8” x 11/16”
Lock Body: 1-13/16” x 1-1/2”
Receiver: 2-3/4” x 1”
L-2 Flush Mounted Lock
Two way keyhole allows lock to be
mounted inside door or drawer. Bolt
throws left or right so that lock can
be used on left or right doors. Plain
steel. Lock is 1-3/4” Wide x 3” High.
Includes brass plated key.
S-15 Full-Mortise Lock
Lock can be used for drawers and
right-hand doors. Steel. Includes diecast
key. 1-7/16” High x 1” Wide. Pin
is centered 11/16” down from top of
lock.
KY-8 Roll Top Desk Key
Brass plated die-cast roll top
desk key.
Overall Size: 2-1/2” x 1”
Barrel Length: 1-3/8”
E-16 Keyhole cover
Keyhole cover for roll top desk lock.
Brass. 3-3/4” x 1-3/8”
37