PEM Self-clinching fasteners
PEM® Self-clinching fasteners | KVT-Fastening PEM® Self-clinching fasteners | KVT-Fastening
Self-clinching spacers For metallic materials Type SKC Design Spacers are used for the quick attachment and removal of PC boards, covers etc. a L d 1 d 5 d 4 d 2 Material Stainless steel 18/8 (AISI 300), passivated t Use For sheet hardness up to HR B 70 Ordering example Housing thickness: 2 mm Distance: 18 mm Order reference: SKC-61,5-20 3-D Data: http://kvt.partcommunity.com Order description d 1 ± 0.08 d 2 d 3 + 0.08 0 d 4 max. d 5 ± 0.08 a ± 0.08 t max. SKC-61.5-L 4.5 6.35 5.5 5.39 2.51 1.73 2.75 Order description Length code “L” ( 0 – 0.13) SKC-61.5-L 6 8 10 12 14 16 18 20 22 25 ∅ Housing PC board Typ Hole in sheet + 0.08 0 sm sm min. Mind. distance hole to edge Tolerance for distance to hole d 1 ± 0.08 Hole in PC board d 2 ± 0.08 A min. Min. distance hole to edge Strength of PC board SKC-61.5 5.40 1.0 6.6 ± 0.13 3 5 3.75 4.1 1.45 – 1.62 50 www.kvt-fastening.com
Pem ® RADSOK ® self-clinching conducting pins For metallic materials Type RADSOK ® L 1 (L 2 ) Design Self-clinching conducting pins designed especially for the Radsok ® high-current interconnect system d 1 Material Steel, silver-plated Use For sheet hardness up to HR B 80 sw d 2 B A A sm Additional sizes upon request d 3 RADSOK ® high-current interconnect system Validated and approved according to AK test guidelines for automotive plug-in connectors. Further information and technical details can be viewed at the website of the German licensee, Amphenol-Tuchel Electronics GmbH, at www.amphenol.info Application example 3-D Data: http://kvt.partcommunity.com Order description d 1 0 – 0.04 Hole in sheet + 0.08 0 d 2 0 – 0.05 d 3 sw sm min. sm L 1 ± 0.25 (L 2 ) A ± 0.1 B ± 0.05 Min. distance hole to edge YQE-14928 29P 3.6 3.6 2.6 3.7 4.8 1.0 17.8 15.6 2.2 1.25 3.7 YQE-15324 29P 6.0 6.0 5.0 6.1 7.1 1.5 36.0 33.0 3.0 1.50 6.1 YQE-16180 29P 8.0 8.0 7.0 8.1 9.5 2.0 37.0 34.0 3.0 1.50 8.1 www.kvt-fastening.com 51
- Page 1 and 2: PEM ® Self-clinching fasteners Eas
- Page 3 and 4: High-performance solutions from KVT
- Page 5 and 6: Contents 11 Self-clinching fastener
- Page 7 and 8: Pem ® Self-clinching high-strength
- Page 9 and 10: Pem ® Self-clinching right-angle f
- Page 11 and 12: Self-clinching fasteners Pem ® Ins
- Page 13 and 14: d 1 d 2 Self-clinching nuts For sta
- Page 15 and 16: d 1 d 2 Miniatur self-clinching nut
- Page 17 and 18: Floating self-clinching nuts For me
- Page 19 and 20: Pem ® Self-clinching nuts With loc
- Page 21 and 22: Miniature self-clinching nuts With
- Page 23 and 24: Weld nuts For metallic materials Pe
- Page 25 and 26: Flare-in nuts Pem ® Type RMHB Desi
- Page 27 and 28: Self-clinching studs For stainless
- Page 29 and 30: Self-clinching pins For metallic ma
- Page 31 and 32: Pem ® Miniature self-clinching pil
- Page 33 and 34: Pem ® Self-clinching high-strength
- Page 35 and 36: Pem ® Self-clinching high-strength
- Page 37 and 38: Concealed-head self-clinching studs
- Page 39 and 40: Self-clinching standoffs For metall
- Page 41 and 42: Self-clinching standoffs For stainl
- Page 43 and 44: Blind self-clinching standoffs For
- Page 45 and 46: Self-clinching captive panel screws
- Page 47 and 48: Self-clinching captive panel screws
- Page 49: Self-clinching spacers For metallic
- Page 53 and 54: Self-clinching cable tie mounts For
- Page 55 and 56: Pem ® Self-clinching right-angle f
- Page 57 and 58: TackPin self-clinching fasteners Fo
- Page 59 and 60: Broaching studs For plastics Pem ®
- Page 61 and 62: Broaching standoffs For plastics Pe
- Page 63 and 64: Surface mount spacers On tape and r
- Page 65 and 66: Technical data - self-clinching nut
- Page 67 and 68: Technical data - self-clinching stu
- Page 69 and 70: Pem ® Technical data - self-clinch
- Page 71 and 72: Pem ® www.kvt-fastening.com 71
- Page 73 and 74: PEMSERTER ® technical overview PEM
- Page 75 and 76: KVT-Fastening - Fastening technolog
<strong>Self</strong>-<strong>clinching</strong> spacers<br />
For metallic materials<br />
Type SKC<br />
Design<br />
Spacers are used for the quick attachment and<br />
removal of PC boards, covers etc.<br />
a<br />
L<br />
d 1<br />
d 5<br />
d 4<br />
d 2<br />
Material<br />
Stainless steel 18/8 (AISI 300), passivated<br />
t<br />
Use<br />
For sheet hardness up to HR B<br />
70<br />
<br />
Ordering example<br />
Housing thickness: 2 mm<br />
Distance: 18 mm<br />
Order reference: SKC-61,5-20<br />
<br />
<br />
3-D Data: http://kvt.partcommunity.com<br />
Order description d 1<br />
± 0.08<br />
d 2<br />
d 3<br />
+ 0.08<br />
0<br />
d 4<br />
max.<br />
d 5<br />
± 0.08<br />
a<br />
± 0.08<br />
t<br />
max.<br />
SKC-61.5-L 4.5 6.35 5.5 5.39 2.51 1.73 2.75<br />
Order description<br />
Length code “L”<br />
( 0<br />
– 0.13)<br />
SKC-61.5-L 6 8 10 12 14 16 18 20 22 25<br />
<br />
<br />
<br />
<br />
<br />
∅<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Housing<br />
PC board<br />
Typ<br />
Hole <br />
in sheet<br />
+ 0.08<br />
0<br />
sm<br />
sm<br />
min.<br />
Mind. distance<br />
hole to edge<br />
Tolerance<br />
for distance<br />
to hole<br />
d 1<br />
± 0.08<br />
Hole in PC board<br />
d 2<br />
± 0.08<br />
A<br />
min.<br />
Min. distance<br />
hole to edge<br />
Strength of<br />
PC board<br />
SKC-61.5 5.40 1.0 6.6 ± 0.13 3 5 3.75 4.1 1.45 – 1.62<br />
50<br />
www.kvt-fastening.com
Change language