PEM Self-clinching fasteners
PEM® Self-clinching fasteners | KVT-Fastening PEM® Self-clinching fasteners | KVT-Fastening
Self-clinching high-strength studs For metallic materials Types HFH, HFHS a Design Self-clinching threaded studs for extremely high torque-out and pull-through resistance d1 d2 Material Type HFH: Steel, hardened, zinc-plated, colorless passivated (other surface treatments upon request) Type HFHS: Stainless steel 18/8 (AISI 300), passivated L 1 t Use Type HFH: For sheet hardness up to HR B 85 Type HFHS: For sheet hardness up to HR B 70 Performance data, see the technical data on page 67 3-D Data: http://kvt.partcommunity.com Steel, zincplated, colorless passivated Order description Stainless steel, passivated Thread d 1 Hole in sheet + 0.13 0 d 2 ± 0.25 d 3 max. a max. t max. sm sm min. Min. distance hole to edge HFH-M5-L HFHS-M5-L M5 5.00 7.8 5.1 2.7 1.14 1.3 10.7 HFH-M6-L HFHS-M6-L M6 6.00 9.4 6.1 2.8 1.27 1.5 11.5 HFH-M8-L HFHS-M8-L M8 8.00 12.5 8.1 3.5 1.78 2.0 12.7 HFH-M10-L HFHS-M10-L M10 10.00 15.7 10.1 4.1 2.29 2.3 13.7 Order description Length code “L 1 ” Steel, zincplated, colorless passivated Stainless steel, passivated (± 0.4) HFH-M5-L 1 HFHS-M5-L 1 15 20 25 30 35 40 50 HFH-M6-L 1 HFHS-M6-L 1 15 20 25 30 35 40 50 HFH-M8-L 1 HFHS-M8-L 1 15 20 25 30 35 40 50 HFH-M10-L 1 HFHS-M10-L 1 15 20 25 30 35 40 50 32 www.kvt-fastening.com
Pem ® Self-clinching high-strength studs For metallic materials Types HFHD, HFHDS ca. 45° a Design Self-clinching threaded studs similar to HFH and HFHS with a dog point lead-in option for automatic installation d 4 d2 Material Type HFHD: Steel, hardened, zinc-plated, colorless passivated, (other surface treatments upon request) Type HFHDS: Stainless steel 18/8 (AISI 300), passivated L 2 L 1 t Use Type HFHD: For sheet hardness up to HR B 85 Type HFHDS: For sheet hardness up to HR B 70 Note L 1 : For the overall length, take into account the length of the standard designs for HFH and HFHS. This is also valid for the dimensions d 2 , sm, a and t on page 32. Performance data, see the technical data on page 67 Alternate dog point – MAThread ® upon request HFHD studs can also be manufactured with a MAThread ® dog point upon request. Anti cross-threading design allows the threads to self-align and the use of shorter lengths. The thread of the assembly nut already grips when it comes into contact with the MAThread ® . Saves weight. 3-D Data: http://kvt.partcommunity.com Steel, zinc-plated, colorless passivated Order description Stainless steel, passivated Thread d 1 d 4 ± 0.13 d 3 L 2 ± 0.25 HFHD-M5-L HFHDS-M5-L M5 3.66 5.1 1.78 HFHD-M6-L HFHDS-M6-L M6 4.37 6.1 2.03 HFHD-M8-L HFHDS-M8-L M8 6.05 8.1 2.67 HFHD-M10-L HFHDS-M10-L M10 7.72 10.1 3.43 www.kvt-fastening.com 33
- Page 1 and 2: PEM ® Self-clinching fasteners Eas
- Page 3 and 4: High-performance solutions from KVT
- Page 5 and 6: Contents 11 Self-clinching fastener
- Page 7 and 8: Pem ® Self-clinching high-strength
- Page 9 and 10: Pem ® Self-clinching right-angle f
- Page 11 and 12: Self-clinching fasteners Pem ® Ins
- Page 13 and 14: d 1 d 2 Self-clinching nuts For sta
- Page 15 and 16: d 1 d 2 Miniatur self-clinching nut
- Page 17 and 18: Floating self-clinching nuts For me
- Page 19 and 20: Pem ® Self-clinching nuts With loc
- Page 21 and 22: Miniature self-clinching nuts With
- Page 23 and 24: Weld nuts For metallic materials Pe
- Page 25 and 26: Flare-in nuts Pem ® Type RMHB Desi
- Page 27 and 28: Self-clinching studs For stainless
- Page 29 and 30: Self-clinching pins For metallic ma
- Page 31: Pem ® Miniature self-clinching pil
- Page 35 and 36: Pem ® Self-clinching high-strength
- Page 37 and 38: Concealed-head self-clinching studs
- Page 39 and 40: Self-clinching standoffs For metall
- Page 41 and 42: Self-clinching standoffs For stainl
- Page 43 and 44: Blind self-clinching standoffs For
- Page 45 and 46: Self-clinching captive panel screws
- Page 47 and 48: Self-clinching captive panel screws
- Page 49 and 50: Self-clinching spacers For metallic
- Page 51 and 52: Pem ® RADSOK ® self-clinching con
- Page 53 and 54: Self-clinching cable tie mounts For
- Page 55 and 56: Pem ® Self-clinching right-angle f
- Page 57 and 58: TackPin self-clinching fasteners Fo
- Page 59 and 60: Broaching studs For plastics Pem ®
- Page 61 and 62: Broaching standoffs For plastics Pe
- Page 63 and 64: Surface mount spacers On tape and r
- Page 65 and 66: Technical data - self-clinching nut
- Page 67 and 68: Technical data - self-clinching stu
- Page 69 and 70: Pem ® Technical data - self-clinch
- Page 71 and 72: Pem ® www.kvt-fastening.com 71
- Page 73 and 74: PEMSERTER ® technical overview PEM
- Page 75 and 76: KVT-Fastening - Fastening technolog
Pem ®<br />
<strong>Self</strong>-<strong>clinching</strong><br />
high-strength studs<br />
For metallic materials<br />
Types HFHD, HFHDS<br />
ca. 45°<br />
a<br />
Design<br />
<strong>Self</strong>-<strong>clinching</strong> threaded studs similar to HFH and<br />
HFHS with a dog point lead-in option for automatic<br />
installation<br />
d 4<br />
d2<br />
Material<br />
Type HFHD: Steel, hardened, zinc-plated,<br />
colorless passivated, (other surface<br />
treatments upon request)<br />
Type HFHDS: Stainless steel 18/8 (AISI 300),<br />
passivated<br />
L 2<br />
L 1<br />
<br />
t<br />
Use<br />
Type HFHD: For sheet hardness up to HR B<br />
85<br />
Type HFHDS: For sheet hardness up to HR B<br />
70<br />
<br />
Note<br />
L 1<br />
: For the overall length, take into account the<br />
length of the standard designs for HFH and<br />
HFHS. This is also valid for the dimensions d 2<br />
,<br />
sm, a and t on page 32.<br />
<br />
Performance data, see the technical data on page 67<br />
Alternate dog point – MAThread ® upon request<br />
HFHD studs can also be manufactured with a<br />
MAThread ® dog point upon request.<br />
Anti cross-threading design allows the threads to<br />
self-align and the use of shorter lengths.<br />
The thread of the assembly nut already grips when it<br />
comes into contact with the MAThread ® . Saves weight.<br />
3-D Data: http://kvt.partcommunity.com<br />
Steel, zinc-plated,<br />
colorless passivated<br />
Order description<br />
Stainless steel,<br />
passivated<br />
Thread<br />
d 1<br />
d 4<br />
± 0.13<br />
d 3<br />
L 2<br />
± 0.25<br />
HFHD-M5-L HFHDS-M5-L M5 3.66 5.1 1.78<br />
HFHD-M6-L HFHDS-M6-L M6 4.37 6.1 2.03<br />
HFHD-M8-L HFHDS-M8-L M8 6.05 8.1 2.67<br />
HFHD-M10-L HFHDS-M10-L M10 7.72 10.1 3.43<br />
www.kvt-fastening.com<br />
33