General Weighing Catalogue - English - 2015 - Small File

1 Year
Warranty
Single Channel Electronic Pipettes
MPA-Series
With the MPA series, it is possible to control the plunger
by lightly ly pressing a key with the ball of the forefinger
(like pulling a trigger), while maintaining all fingers in a
natural, effortless
grip. No longer will hours or days of
pipetting make you feel any pain in your thumb.
With padding set on
the four corners of the
head, the pipettes of
the MPA series are
protected from
impacts and falls.
Stress-minimized, pain-free operation:
Reduced physical stress due to ergonomic operation. The use of an
electronic pipette requires minimal power, and keeps the strain on your
hand as low as possible. The degree of fatigue compared to a manual Pipette is very low.
Specifications
MPA-10 MPA-20 MPA-200 MPA-1200 MPA-10000
Volume
0.1 to 10.0 mL
Accuracy
Repeatability
±4.0% / ±1.0% ±4.0% / ±1.0% ±2.5% /±0.6% ±2.5% /±0.6%
2.5% / 0.4% 2.5% / 0.4% 1.0 / 0.15% 0.6 / 0.15%
±2.5% /±0.5%
0.6 / 0.15%
• Automatic operation assuring accuracy for everyone at all times
• Calibration and display by either volume (µL/mL) or weight (mg)
• Multiple dispensing (MD) mode with automatic initial volume correction (pre-dispensing)
• Mixing (MIX) mode for homogenizing solutions
• Reverse operation for accurately dispensing viscous samples
• Aspirating/dispensing speeds adjustable to 5 levels
• Easy calibration (adjustment) by yourself – User CAL function
• Accurate pipetting possible with other manufacturers' tips
10
Accessories
Tip box for the MPA-10/20/200*3
Tip box for the MPA-1200*3
Tip box for the MPA-10/20/200 (without lid)*3
Tip box for the MPA-1200 (without lid)*3
Tip cartridge for the MPA-10/20 (10 Trays)*4
Tip cartridge for the MPA-200 (10 Trays)*4
Tip cartridge for the MPA-1200 (10 Trays)*4
Stainless steel stand (for up to three MPAs)
Acrylic stand (for up to two MPAs)
Charging hanger
Charging stand for single MPA
Charging stand for four MPAs
Lithium-ion rechargeable battery
Lower part assembly for the MPA-10
Lower part assembly for the MPA-20
Lower part assembly for the MPA-200
Lower part assembly for the MPA-1200
Lower part assembly for the MPA-10000
*3 tips not included, *4 one set includes 96 tips
Model
AX-BOX200A
AX-BOX1200A
AX-BOX200B
AX-BOX1200B
AX-CART-10/20
AX-CART-200
AX-CART-1200
AX-ST-SUS
AX-ST-ACR
AX-HA-CHG
AX-ST-CH-A1
AX-ST-CH-M4
AX-BAT-MPA
AX-LOW-10
AX-LOW-20
AX-LOW-200
AX-LOW-1200
AX-LOW-10000