Advanced Configuration and Power Interface Specification

Advanced Configuration and Power Interface Specification
field DescriptorName._MAF is automatically created to refer to this portion of the resource
descriptor, where ‘1’ is MaxFixed and ‘0’ is MaxNotFixed.
Cacheable specifies whether or not the memory region is cacheable (Cacheable), cacheable and
write-combining (WriteCombining), cacheable and prefetchable (Prefetchable) or uncacheable
(NonCacheable). If nothing is specified, then NonCacheable is assumed. The 2-bit field
DescriptorName._MEM is automatically created to refer to this portion of the resource descriptor,
where ‘1’ is Cacheable, ‘2’ is WriteCombining, ‘3’ is Prefetchable and ‘0’ is NonCacheable.
ReadAndWrite specifies whether or not the memory region is read-only (ReadOnly) or read/write
(ReadWrite). If nothing is specified, then ReadWrite is assumed. The 1-bit field
DescriptorName._RW is automatically created to refer to this portion of the resource descriptor,
where ‘1’ is ReadWrite and ‘0’ is ReadOnly.
AddressGranularity evaluates to a 32-bit integer that specifies the power-of-two boundary (- 1) on
which the Memory range must be aligned. The 32-bit field DescriptorName._GRA is automatically
created to refer to this portion of the resource descriptor.
AddressMinimum evaluates to a 32-bit integer that specifies the lowest possible base address of the
Memory range. The value must have ‘0’ in all bits where the corresponding bit in
AddressGranularity is ‘1’. For bridge devices which translate addresses, this is the address on the
secondary bus. The 32-bit field DescriptorName._MIN is automatically created to refer to this
portion of the resource descriptor.
AddressMaximum evaluates to a 32-bit integer that specifies the highest possible base address of the
Memory range. The value must have ‘0’ in all bits where the corresponding bit in
AddressGranularity is ‘1’. For bridge devices which translate addresses, this is the address on the
secondary bus. The 32-bit field DescriptorName._MAX is automatically created to refer to this
portion of the resource descriptor.
AddressTranslation evaluates to a 32-bit integer that specifies the offset to be added to a secondary
bus I/O address which results in the corresponding primary bus I/O address. For all non-bridge
devices or bridges which do not perform translation, this must be ‘0’. The 32-bit field
DescriptorName._TRA is automatically created to refer to this portion of the resource descriptor.
RangeLength evaluates to a 32-bit integer that specifies the total number of bytes decoded in the
Memory range. The 32-bit field DescriptorName._LEN is automatically created to refer to this
portion of the resource descriptor.
ResourceSourceIndex is an optional argument which evaluates to an 8-bit integer that specifies the
resource descriptor within the object specified by ResourceSource. If this argument is specified, the
ResourceSource argument must also be specified.
ResourceSource is an optional argument which evaluates to a string containing the path of a device
which produces the pool of resources from which this Memory range is allocated. If this argument is
specified, but the ResourceSourceIndex argument is not specified, a zero value is assumed.
DescriptorName is an optional argument that specifies a name for an integer constant that will be
created in the current scope that contains the offset of this resource descriptor within the current
resource template buffer. The predefined descriptor field names may be appended to this name to
access individual fields within the descriptor via the Buffer Field operators.
MemoryRangeType is an optional argument that specifies the memory usage. The memory can be
marked as normal (AddressRangeMemory), used as ACPI NVS space (AddressRangeNVS), used
826 April, 2015 Version 6.0