Advanced Configuration and Power Interface Specification

Advanced Configuration and Power Interface Specification
SMB_PRTCL:
0x00 to indicate command completion.
12.9.2.6 Read Byte
Data Sent:
SMB_ADDR:
SMB_CMD:
SMB_PRTCL:
Address of SMBus device.
Command byte to be sent.
Write 0x07 to initiate the read byte protocol, or 0x87 to initiate the read byte protocol
with PEC.
Data Returned:
SMB_DATA[0]:
SMB_STS:
SMB_PRTCL:
Data byte received.
Status code for transaction.
0x00 to indicate command completion.
12.9.2.7 Write Word
Data Sent:
SMB_ADDR:
SMB_CMD:
SMB_DATA[0]:
SMB_DATA[1]:
SMB_PRTCL:
Address of SMBus device.
Command byte to be sent.
Low data byte to be sent.
High data byte to be sent.
Write 0x08 to initiate the write word protocol, or 0x88 to initiate the write word protocol
with PEC.
Data Returned:
SMB_STS:
SMB_PRTCL:
Status code for transaction.
0x00 to indicate command completion.
12.9.2.8 Read Word
Data Sent:
SMB_ADDR:
SMB_CMD:
SMB_PRTCL:
Address of SMBus device.
Command byte to be sent.
Write 0x09 to initiate the read word protocol, or 0x89 to initiate the read word protocol
with PEC.
652 April, 2015 Version 6.0