27.10.2015 Views

Advanced Configuration and Power Interface Specification

ACPI_6.0

ACPI_6.0

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Advanced</strong> <strong>Configuration</strong> <strong>and</strong> <strong>Power</strong> <strong>Interface</strong> <strong>Specification</strong><br />

_S1W must return the same integer each time it is evaluated. This value allows OSPM to choose a<br />

deeper S-state to D-state mapping than specified by _S1D. This value must always be greater than or<br />

equal to _S1D, if _S1D is present.<br />

7.3.22 _S2W (S2 Device Wake State)<br />

This object evaluates to an integer that conveys to OSPM the deepest D-state supported by this<br />

device in the S2 system sleeping state that can wake the system.<br />

Arguments:<br />

None<br />

Return Value:<br />

An Integer containing the deepest D-state that supports wake in state S2. If OSPM has not indicated<br />

that it supports _PR3 through the OSPM Platform-Wide Capabilities (see Section 6.2.11.2), then the<br />

value "3" corresponds to D3. If it has indicated _PR3 support, the value "3" represents D3hot <strong>and</strong><br />

the value "4" represents D3cold.<br />

_S2W must return the same integer each time it is evaluated. This value allows OSPM to choose a<br />

deeper S-state to D-state mapping than specified by _S2D. This value must always be greater than or<br />

equal to _S2D, if _S2D is present.<br />

7.3.23 _S3W (S3 Device Wake State)<br />

This object evaluates to an integer that conveys to OSPM the deepest D-state supported by this<br />

device in the S3 system sleeping state that can wake the system.<br />

Arguments:<br />

None<br />

Return Value:<br />

An Integer containing the deepest D-state that supports wake in state S3. If OSPM has not indicated<br />

that it supports _PR3 through the OSPM Platform-Wide Capabilities (see Section 6.2.11.2), then the<br />

value "3" corresponds to D3. If it has indicated _PR3 support, the value "3" represents D3hot <strong>and</strong><br />

the value "4" represents D3cold.<br />

_S3W must return the same integer each time it is evaluated. This value allows OSPM to choose a<br />

deeper S-state to D-state mapping than specified by _S3D. This value must always be greater than or<br />

equal to _S3D, if _S3D is present.<br />

7.3.24 _S4W (S4 Device Wake State)<br />

This object evaluates to an integer that conveys to OSPM the deepest D-state supported by this<br />

device in the S4 system sleeping state that can wake the system.<br />

Arguments:<br />

None<br />

406 April, 2015 Version 6.0

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!