Advanced Configuration and Power Interface Specification

Advanced Configuration and Power Interface Specification
Table 5-143 Control Method Battery Device Notification Values
Hex value
0x80
0x81
0x82
0x83-0xBF
Description
Battery Status Changed. Used to notify OSPM that the Control Method Battery device
status has changed.
Battery Information Changed. Used to notify OSPM that the Control Method Battery device
information has changed. This only occurs when a battery is replaced.
Battery Maintenance Data Status Flags Check. Used to notify OSPM that the Control
Method Battery device battery maintenance data status flags should be checked.
Reserved.
Table 5-144 Power Source Object Notification Values
Hex value
0x80
0x81
0x82-0xBF
Description
Power Source Status Changed. Used to notify OSPM that the power source status has
changed.
Power Source Information Changed. Used to notify OSPM that the power source
information has changed.
Reserved.
Table 5-145 Thermal Zone Object Notification Values
Hex value
0x80
0x81
0x82
0x83
0x84-0xBF
Description
Thermal Zone Status Changed. Used to notify OSPM that the thermal zone temperature
has changed.
Thermal Zone Trip points Changed. Used to notify OSPM that the thermal zone trip points
have changed.
Device Lists Changed. Used to notify OSPM that the thermal zone device lists (_ALx,
_PSL, _TZD) have changed.
Thermal / Active Cooling Relationship Table Changed. Used to notify OSPM that values
in the either the thermal relationship table or the active cooling relationship table have
changed.
Reserved.
Table 5-146 Control Method Power Button Notification Values
Hex value
0x80
0x81-0xBF
Description
S0 Power Button Pressed. Used to notify OSPM that the power button has been pressed
while the system is in the S0 state. Notice that when the button is pressed while the system is
in the S1-S4 state, a Device Wake notification must be issued instead.
Reserved.
252 April, 2015 Version 6.0