27.10.2015 Views

Advanced Configuration and Power Interface Specification

ACPI_6.0

ACPI_6.0

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ACPI Software Programming Model<br />

Type 2 0 3 - SMBIOS Management Information Structure<br />

Length 2 2 Length in bytes for entire structure.<br />

Reserved 4 4<br />

Data _ 8 SMBIOS Table Entries<br />

5.2.25.5 NVDIMM Control Region Structure<br />

Table 5-133 NVDIMM Control Region Structure<br />

Field<br />

Byte<br />

Length<br />

Byte<br />

Offset<br />

Description<br />

Type 2 0 4 - NVDIMM Control Region Structure<br />

Length 2 2 Length in bytes for entire structure.<br />

The length of this structure is either 32 bytes or 80 bytes. The<br />

length of the structure can be 32 bytes only if the Number of<br />

Block Control Windows field has a value of 0.<br />

NVDIMM Control<br />

Region Structure<br />

Index<br />

2 4 Index Number uniquely identifies the NVDIMM Control Region<br />

Structure.<br />

Vendor ID 2 6 To allow loading of vendor specific driver. This Vendor ID field<br />

should contain the DDR4 SPD Bytes 320 <strong>and</strong> 321 as defined<br />

by JEDEC Spec JEP-106. Byte0 of Vendor ID corresponds to<br />

DDR4 SPD Byte 320 <strong>and</strong> Byte1 corresponds to SPD Byte 321.<br />

Device ID 2 8 To allow vendor to comprehend multiple devices. Device ID<br />

field is defined by DDR4 SPD fields 192 <strong>and</strong> 193 (per JEDEC<br />

SPD Annex L: Serial Presence Detect for DDR4 SDRAM<br />

NVDIMM Revision 0.5 or greater (Item 2220.01). Byte0 of<br />

Device ID corresponds to DDR4 SPD Byte 192 <strong>and</strong> Byte1<br />

corresponds to DDR4 SPD Byte 193.<br />

RID 2 10 Revision ID<br />

Byte0 is Module Revision Code defined by DDR4 SPD field<br />

349 (per JEDEC SPD Annex L: Serial Presence Detect for<br />

DDR4 SDRAM DDR4 SPD Document Release 2).<br />

Byte1 is reserved<br />

Subsystem<br />

Vendor ID<br />

Subsystem<br />

Device ID<br />

2 12 To allow loading solution provider driver. Byte0 of Subsystem<br />

Vendor ID corresponds to DDR4 SPD Byte 194 <strong>and</strong> Byte1<br />

corresponds to DDR4 SPD Byte 195 (per JEDEC SPD Annex<br />

L: Serial Presence Detect for DDR4 SDRAM NVDIMM<br />

Revision 0.5 or greater (Item 2220.01).<br />

2 14 To allow solution provider to comprehend multiple devices.<br />

Byte0 of Subsystem Device ID corresponds to DDR4 SPD Byte<br />

196 <strong>and</strong> Byte1 corresponds to DDR4 SPD Byte 197 (per<br />

JEDEC SPD Annex L: Serial Presence Detect for DDR4<br />

SDRAM NVDIMM Revision 0.5 or greater (Item 2220.01).<br />

Version 6.0 209

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!