Launch 3 Wireless Telecom, Grounding, Safety and Electrical Supplies

WORLDWIDE DISTRIBUTION SOLUTIONS 

2015 

Wireless Telecom, Grounding 

and Electrical Supplies

Globally Connected, 

Individually Personalized. 

Launch 3 is the telecom industry’s premier, full service global 

provider and distributor of wireless equipment, construction 

and services. With over 100 years of combined professional 

experience, our team has the expertise and resources to satisfy 

an ever-expanding worldwide market of wireless telecom 

materials and supplies. 

1 

Launch 3 Telecom 2015 

sales@launch3.net LAUNCH3TELECOM.COM 

| 877.878.9134

Product Index 

4 

15 

19 

Cable Attachment 

Snap Stackable Hangers 

Snap-In Hangers 

Butterfly Hangers 

Angle Adapters 

Stand Off Adapters 

3 Ways 

Hose Clamps 

Clamp Heads 

Coax Support Blocks 

Grommet Cushions 

Hoisting Grips 

Stainless Steel Banding 

Zip Ties 

Cable Entry 

Boot Assemblies 

Cushion Inserts 

Port Panels 

Weatherproofing 

Tape 

Enclosures 

Cold Shrink Kit 

27 

29 

30 

44 

DAS/RF Components 

RET Cable Assemblies 

Dummy Loads 

PIM Rated RF Jumpers 

Strut Accessories 

Galvanized Spring Nuts 

Strut End Caps 

Grounding 

Lugs 

Buss Bars 

Exothermic Weld Metal 

Exothermic Molds 

Handles and 

Accessories 

Safety Products 

Lifting and Rigging 

Tower Climbing 

General PPE and Safety 

Rescue 

Ropes 

Tower Tools 

21 

23 

Heat Shrink 

Heat Shrink Rolls 

Heat Shrink 

Heavy Duty Marine Grade 

Clear Heat Shrink 

Ground Kits 

Tinned Snap In Ground Kit 

Universal Tinned Ground Kit 

59 

62 

Custom Manufacturing 

Directional Couplers 

Power Splitters 

Hybrid Coupler/Matrix 

RF Loads 

Attenuators 

Testing Equipment 

Antenna Alignment Tool 

24 

Steel Products 

Galvanized U-Bolt 

Assemblies 

Galvanized V-Clamps 

Galvanized C-Clamps 

Pipe-to-Pipe Clamps 

Crossover Plates 

Waveguide Bridge 

Support Brackets 

Trapeze Kit 

Launch 3 Telecom 2015 2

3 

Launch 3 Telecom 2015 

LAUNCH3TELECOM.COM


Pages 4-14 

Snap Stackable Hangers 

General Specifications 

- Durable 304 Stainless Steel construction 

- For use on corrugated cables 

- Smooth edging to prevent accidental cuts to installers 

PART # DESCRIPTION CABLE DIAMETER MAX. CABLE DIAM MIN. QUANTITY 

SSH-12 Snap stack in hanger for 1/2” 0.640 in. 0.54 in. Pack of 10 

SSH-78 Snap stack in hanger for 7/8” 1.220 in. 1.050 in. Pack of 10 

SSH-114 Snap stack in hanger for 1-1/4” 1.700 in. 1.480 in. Pack of 10 

SSH-158 Snap stack in hanger for 1-5/8” 2.050 in. 1.900 in. Pack of 10 

sales@launch3.net | 877.878.9134 Launch 3 Telecom 2015 4

LAUNCH3TELECOM.COM 


Snap-In Hangers 



- For use on corrugated cables 

- Smooth edging to prevent accidental cuts to installers 


SI-12 Snap-In Hanger 1/2” 0.640 in. 0.41 in. Kit of 10 

SI-78 Snap-In Hanger 7/8” 1.220 in. 1.050 in. Kit of 10 

SI-114 Snap-In Hanger 1-1/4” 1.700 in. 1.480 in. Kit of 10 



Butterfly Hangers 



- Compatible with corrugated, smooth wall and elliptical waveguide 

- 3/8” mounting hardware included 

- Captivated slotted SS screw and nut for tightening 

- Attach with banding, hose clamps, angle adapters and stand offs 


BH-12 Butterfly Hanger 1/2” 0.64 in. 0.41 in. Kit of 10 



BH-114 Butterfly Hanger 1-1/4” 1.700 in. 1.480 in. Kit of 10 



5 

Launch 3 Telecom 2015



3/8” Tapped Hole Angle Adapters 


- Heavy duty 304 Stainless Steel construction 

- Serrated edge grabs onto and holds steel surfaces 

- 1” opening 

- All Angle Adapters come with 3/8” Fillister/ Frankenstein bolt 

- Allows for various attachment points on cell-site 

PART # DESCRIPTION QUANTITY 

AA-38 3/8” Threaded Tapped Hole Kit of 10 

Universal Angle Adapters 



- Serrated edge grabs onto and holds steel surfaces 

- 1” opening 

- All Angle Adapters come with 3/8” Fillister/ Frankenstein bolt 

- Allows for various attachment points on a cell site 

- Accepts up to 2 Snap-Ins 


AA-U SS Angle Adapter with 3/4” hole for Snap-In Hangers Kit of 10 

AA-UI SS Angle Adapter with 3/4” Hole and Hardware Kit of 10 

INSERT-38 3/8” Insert with Hardware Kit of 10 




Tower Stand Off Adapters 

with 3/8” Tapped Hole 


- 3/8” threaded hole 


- Accepts hose clamps and banding 

- All kits stand 1” off leg 

- Hardware sold separately 


SA-38 2”-3” Stand Off with 3/8” Tapped Hole Kit 

Universal Stand Off with 

3/4” Hole For Snap-Ins 


- 3/4” hole for Snap-Ins 


- Accepts hose clamps and banding 

- All kits stand 1” off leg 

- Hardware sold separately 


SA-U 2”-3” Stand Off with 3/4”Hole. Universal Kit of 10 

7 




Universal 3-Way 

Stand Off Adapters 



- Accepts up to 1-5/8” Snap-In hangers 

- Accepts up to 3/4” banding 


USO-3/4 Stainless Universal Stand Off Adapters Kit of 10 

Insert Kits for Angle Adapters 


- 3/8” threaded insert with stainless steel hardware 

- Compatible with 3/4” stand offs and angle adapters 

- Includes bolts and locks 


INSERT-38 3/8” Angle Adapter Insert 10 / Pack 




Stainless Steel Hose Clamps 


- Marine Grade 304 Stainless Steel hose clamps 

- Round member adapters 

RM-A200 

PART # DESCRIPTION SAE SIZES MIN. DIAMETER QUANTITY 

RM-A100 1”- 2” Hose Clamps 24 1 in. Kit of 10 


RM-A210 2”- 10” Hose Clamps N/A 2 in. Kit of 10 



Clamp Heads 



- Accepts 1/2” banding or hose clamps 

- 3/8” hole for common hardware mounting 


CH-10 Stainless Steel Clamp Heads Kit of 10 

9 




Coax Support Blocks 


- Durable UV resistant polypropylene material 

- Interior rib construction offers better cable retention 

- 3/8” hole accommodates common hardware 

CB-12 

CB-78 

CB-158 


CB-12 1/2” Coax Block Assemblies Kit of 10 

CB-78 7/8” Coax Block Assemblies Kit of 10 

CB-114 1-1/4” Coax Block Assemblies Kit of 10 

CB-158 1-5/8” Coax Block Assemblies Kit of 10 

Vinyl Protection Caps 


- 3/8” Vinyl Cap for threaded rod safety caps 


VSC-38 3/8” Vinyl Cap for Threaded Rod Safety Caps 100 / Bag 

Universal Barrel Cushion 


- For use with Snap-Ins and coax blocks 

- Accepts various cable and wire sizes 

- Universal construction for greater cable ranges 


UBC-78 Universal Barrel Cushion 4mm to 14mm for 7/8” Hanger Kit of 10 

UBC-158 Universal Barrel Cushion for 14mm to 36mm for 1-5/8” Hangers Kit of 10 

UBC-214 Universal Barrel Cushion for 14mm to 45mm for 2-1/4” Hangers Kit of 10 




Grommet Cushions 


- For use with Snap-Ins and coax blocks 

- Accepts various cable and wire sizes 


SSH-14 Universal for Fiber Lines Kit of 10 

SSH-38 1/2” Adapter For Use With 3/8” Cable Kit of 10 

SSH-78-7 7/8” Insert For 7mm - 11mm Kit of 10 

SSH-78-11 7/8” Insert For 11mm -17mm Kit of 10 

SSH-114-7 1-1/4” Insert For 7mm - 11mm Kit of 10 




SSH-38 SSH-78-7 SSH-78-11 

SSH-114-7 SSH-114-11 SSH-114-17 SSH-158-22 

11 




Pre-Laced Hoisting Grips 



- Oetiker Clamp included 

1/4” Grip Shown 


HG-PL-14 1/4” Pre-Laced Hoisting Grip 1 





HG-PL-114 1-1/4” Pre-Laced Hoisting Grip 1 

HG-PL-158 1-5/8” Pre-Laced Hoisting Grip 1 

Lace Up Hoisting Grips 



1/4” Grip Shown 


HG-14 1/4” Lace Up Hoisting Grip 1 





HG-114 1-1/4” Lace Up Hoisting Grip 1 






Stainless Steel Banding 


- Packaged in easy to use carrying case 

- Superior construction 


SSB-12 1/2” x .03” x 100’ Roll 100’ Roll 

SSB-34 3/4” x .03” x 100’ Roll 100’ Roll 

Ear Lock Buckles 


- Heavy duty stainless steel construction 


BB-12 1/2” Ear Lock Buckles 100 / Box 

BB-34 3/4” Ear Lock Buckles 100 / Box 

Banding Tightening Tool 


- Superior construction 


SSB-TOOL Banding Tightening Tool 1 

13 




304 Stainless Steel Zip Ties 


- Durable 304 Stainless Steel Finish 

- Low profile, self locking, ball bearing head mechanism 

with fully adjustable strap provides quick installation 

- Fully enclosed head does not allow dirt or grit to interfere 

with locking mechanism 

- High tensile strength adds strength and safety on heavy 

duty applications 

- Smooth round edges ensure safe, efficient handling 


ZT-S-14 355mm x 4.5mm x .25mm (14”x 3/16”) Stainless Steel Zip Ties 100 / bag 

Nylon Zip Ties 


- UL listed 

- Heavy duty 

- Self locking nylon cable ties 

- Material is Polyamide 66 

- Sold in 50lb. or 120lb. test 


IZ-5X180 180mm x 4.5mm x 1.2mm (7”) 50lb. Test 100 / Bag 





IZ-8X450 450mm x 7.5mm x 1.45mm (18” 120lb. Test 100 / Bag 


Cable Entry 

Pages 15-18 

Boot Assemblies 


- Material unaffected by ozone, sunlight or aging. 

- EPDM rubber 

- Includes two 304 stainless steel hose clamps 

- One piece design for easy installation 

- Inserts and plugs sold separately 

BA-XX 


BA-XX 4” Boot Without Insert 1 

BA-5X 5” Boot Without Insert 1 

BA-5X 

15 



Cable Entry 

4” Cushion Inserts 


- Designed for use in entry port boots 

- Durable design and construction 

- EPDM rubber 

CI-1-38 

CI-3-38 


CI-1-38 1 Hole for 3/8” 1 

CI-3-38 3 Hole for 3/8” 1 

CI-1-12 CI-2-12 CI-3-12 

CI-9-12 

CI-1-12 1 Hole for 1/2” 1 

CI-2-12 2 Hole for 1/2” 1 

CI-3-12 3 Hole for 1/2” 1 

CI-4-12 4 Hole for 1/2” 1 

CI-9-12 9 Hole for 1/2” 1 

CI-1-58 1 Hole for 5/8” 1 

CI-1-78 

CI-2-78 

CI-3-78 

CI-4-78 

CI-1-78 1 Hole for 7/8” 1 

CI-2-78 2 Hole for 7/8” 1 

CI-3-78 3 Hole for 7/8” 1 

CI-4-78 4 Hole for 7/8” 1 



Cable Entry 

4” Cushion Inserts 


1 

CI-1-114 CI-1-158 CI-1-214 CI-B 

CI-12-PC1 


CI-1-114 1 Hole for 1-1/4” 1 

CI-1-158 1 Hole for 1-5/8” 1 

CI-1-214 1 Hole for 2-1/4” 1 

CI-B Solid Insert. No Hole 1 

CI-12-2-PC1 3 Hole 2x18mm and 1x10mm with Plugs 1 

Cushion Plug 


- Used to seal unused holes 


PLUG-12 1/2” Insert Plug Kit of 5 

PLUG 78 7/8” Insert Plug Kit of 5 

PLUG-114 1-1/4” Insert Plug Kit of 5 

PLUG-158 1-5/8” Insert Plug Kit of 5 

17 



Cable Entry 

Entry Port Panels 


- Heavy duty aluminum construction 

- Powder coat finish 

- Sealing caps and mounting hardware included 

EPP-1x1B 

PART # DESCRIPTION SIZE QUANTITY 

EPP-1x1A 1 Port Panel 5” x 5” 10 / Case 

EPP-1x1B 1 Port Panel 7” x 7” 10 / Case 

EPP-1x2 2 Port Panel 1’ 3-1/2” x 9-1/2” 10 / Case 

EPP-1x3 3 Port Panel 1’ 8” x 9-1/2” 10 / Case 

EPP-1x4 4 Port Panel 2’ 1-1/2” x 9-1/2” 10 / Case 

EPP-1x6 6 Port Panel 3’ 1/2” x 9-1/2” 5 / Case 

EPP-2*2A 4 Port Panel 11” x 11” 10 / Case 

EPP-2x2B 4 Port Panel 1’ 5-1/2” x 1’ 5-1/2” 10 / Case 

EPP-2x3 6 Port Panel 1’ 11” x 1’ 5-1/2” 10 / Case 

EPP-2x4 8 Port Panel 2’ 1-1/2” x 1’ 5-1/2” 5 / Case 


EPP-3x3 9 Port Panel 1’ 11” x 1’ 11” 5 / Case 



EPP-4x6 24 Port Panel 3’ 2-1/2” x 2’ 7” 5 / Case 


EPP-CAP Entry Port Panel Cap 4” 1 

EPP-1x4 

EPP-CAP 


Weatherproofing 

Pages 19-20 

Weatherproofing Tape Kit 


- Universal all-weather weatherproofing kit 

- Ideal for sealing connections 

- UL Listed electrical tape 


WK-U Contents: 1 Kit 

- 6 Rolls Butyl Mastic (2-1/2” x 2’) 

- 2 Rolls Electrical Tape (3/4” x 66’) 

- 1 Roll Wide Electrical Tape (2” x 20’) 

Butyl Rubber And Electrical Tape 


- Butyl provides additional moisture seal for cable connections 

- UL Listed electrical tape 

BUTYL 


BUTYL 2.5” x 24” Roll 200 / Case 

TAPE-2 2” x 24” Wide UL Listed Electrical Tape 1 

TAPE-2 

19 



Weatherproofing Enclosure 


- Alternative weatherproofing device 

- Polypropylene hard case 

- Clean removal 

- Gel seal keeps water out 

- Single use application 

- High density port design 


EN-12-ANT 1/2” Antenna Gel Seal Enclosure 1 

Cold Shrink Kit 


- Weatherproofing device 

- EPDM rubber construction 

- Seals 1/2” to 7/8” antenna and device connections 

- No tools required 

- Individually packaged 


CS-1278 1/2” Through 7/8” Antenna and Device Connections 1 


Heat Shrink 

Pages 21-22 

Heat Shrink Rolls 


- Crosslinked polyolefin 

- UV Resistant 

- Flame retardant 

- Operating temp: -55ºC to +135ºC 

- Minimum shrink temp: 70ºC 

- Minimum full recovery temp: 100ºC 

- Shrink ratio 2:1 

- RoHS compliant 

- Meets SAE-AMS-DTL-23053/5 Class 1 3 

- No adhesive 

- 100’ spools 

HS-.5-BLK-SP 

HS-.5-CLR-SP 

PART # DESCRIPTION COLOR RATIO QUANTITY 

HS-.25-BLK-SP .25” x 100’ Spool. Thin Wall. Black 2:1 10 / Case 

HS-.25-CLR-SP .25” x 100’ Spool. Thin Wall. Clear 2:1 10 / Case 

HS-.5-BLK-SP .50” x 100’ Spool. Think Wall. Black 2:1 10 / Case 

HS-.5-CLR-SP .50” x 100’ Spool. Thin Wall. Clear 2:1 10 / Case 

HS-1.0-BLK-SP 1.0” x 100’ Spool. Thin Wall. Black 2:1 7 / Case 

HS-1.0-CLR-SP 1.0” x 100’ Spool. Thin Wall Clear 2:1 7 / Case 

21 



Heat Shrink 


- UV Resistant, flame retardant 

- Operating temp: -55ºC to +125ºC 

- Minimum shrink temp: 70ºC. Minimum full recovery temp: 110ºC 

- Shrink ratio 3:1 

- RoHS compliant 

- Meets SAE-AMS-DTL-23053/5 Class 1 3 

- Cross linked adhesive lined polyolefin 

- Co-extrusion technology 

- Excellent sealing and insulation properties 

- 4’ long adhesive lined sticks 

PART # DESCRIPTION COLOR QUANTITY 

HS-.25X48 .25” x 48” with Adhesive, UL Listed Black 100 / Case 



HS-1.5X48 1.50” x 48” with Adhesive, UL Listed Black 20 / Case 

Heavy-Duty Marine Grade 

Heat Shrink 

HS-1.5x48HD 1.50” x 48” Heavy Duty with Adhesive Black 20 / Case 

Clear Heat Shrink 

HS-.25X48-C .25” x 48” with Adhesive Clear 100 / Case 

HS-.50X48-C .50” x 48” with Adhesive Clear 100 / Case 

HS-1.5X48-C 1.50” x 48” with Adhesive Clear 20 / Case 


Ground Kits 

Tinned Snap In Ground Kit 


- Tinned construction for multiple cable types 

- Easy installation, wrap, snap in and weatherproof 

- Kit includes unattached lug, hardware, butyl and electrical tape 

TGK-158 


TGK-12 1/2” Tinned Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

TGK-38 1/4” and 3/8” Universal Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

TGK-78 7/8” Tinned Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

TGK-114 1-1/4” Tinned Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

TGK-158 1-5/8” Tinned Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

Universal Tinned Ground Kit 


- Installs on 1/2” to 3” Coax 

- Markings allow for easy installation 

- Kit includes: unattached lug, hardware, butyl and electrical tape 

UGK-A 


UGK-A 1/2” - 2-1/4” Universal Tinned Ground Kit. 5’ Unattached Lead (Hardware Included) 20 / Case 

23 Launch 3 Telecom 2015


Pages 24-26 

Galvanized U-Bolt Assemblies 


- Hot Dip Galvanized 

- Used to attach pipes to a variety of structures 

- Flat washers, lock washers and hex nuts included 


UB-3244 3/8” x 2-1/2” x 4” Galvanized U-Bolt Assembly 80 / Box 

UB-3355 3/8” x 3-5/8” x 5-1/4” Galvanized U-Bolt Assembly 60 / Box 


UB-4352 1/2” x 3” x 5-1/4” Galvanized U-Bolt Assembly 40 / Box 




UB-5456 5/8” x 4-5/8” x 6-1/2” Galvanized U-Bolt Assembly 20 / Box 

Crossover Plates 


- Galvanized steel construction 

- Includes crossover plate, U-bolts, washers and nuts 


CP-2020 Crossover Plate Joins 2-3/8” to 2-3/8” OD 1 




CP-2530 Crossover Plate, Joins 2-7/8” to 3-1/2” OD 1 


CP-3040 Crossover Plate, Joins 3-1/2” to 4-1/2” OD (1/2” thick plate) 1 




Galvanized Clamps Halves 


- Hot Dip Galvanized 


V-1.5-5 3/8” x 1-1/2” x 5” Galvanized V-Clamp Half 1 

V-1.5-6 3/8” x 1-1/2” x 6” Galvanized V-Clamp Half 1 

V-1.5-7 3/8”x 1-1/2” x 7” Galvanized V-Clamp Half 1 

V-1.5-858 3/8” x 1-1/2” x 8-5/8” Galvanized V-Clamp Half 1 

SCP 1/2” x 1-1/2” x 5-7/8” Galvanized C-Clamp Half 1 

ACP 1/4” x 1-1/2” x 6-1/16” Galvanized C-Clamp Half 1 

DCP 1/2” x 2” x 8-3/8” Galvanized C-Clamp Half 1 

MCP 1/2” x 2”x 11-5/8” Galvanized C-Clamp Half 1 

Pipe-To-Pipe Clamps 


- Galvanized Steel Construction 

- Includes clamp halves, threaded rods, nuts, 

bolts, washers, locks 


PC-20-10 Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD. Light Duty 1 Per Kit 

PC-30-10 Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD. Heavy Duty 1 Per Kit 

PC-35-14 Pipe-To-Pipe Clamp Joins Two 2-3/8” to 5” OD. 1 Per Kit 

25 




Waveguide Bridge 

Support Bracket 



- Side-mounted design to support 12” or 24” waveguide bridge 

- U-bolt and hardware included 


HH-LB24-3 24” Wide for 3-1/2” OD Legs 1 

HH-LB-12-3 12” Wide for 3-1/2” OD Legs 1 

Trapeze Kit 



- Triple tee, 24” wide, three rungs 

- Used with waveguide bridge kits 

- Pre-punched with 3/4” and 7/16” holes 


TK-T12-3 Triple Tee, 12” Wide, Three Rungs 1 

TK-T24-3 Triple Tee, 24” Wide, Three Rungs 1 

sales@launch3.net | 877.878.9134 


DAS/RF Components 

Pages 27-28 

RET AISG 2.0 Male to Female Assemblies 


- AISG Compatible v 1.1 & v 2/0 

- Up to 300 V max. 

- Standard length (m) from 0.5 to 100 

- Terminated AISG 8 pin socket screw lock male and female 

- Temperature range: -15º C to +70º C, Humidity up to 100% 

- IP Rating: IP67 

- Available in per foot increments 

PART # 

IRETC-0.5 

IRETC-1.0 

IRETC-2.0 

IRETC-3.0 

IRETC-4.0 

IRETC-5.0 

IRETC-6.0 

IRETC-10 

IRETC-15 

IRETC-40 

IRETC-50 

IRETC-60 

IRETC-80 

IRETC-100 

DESCRIPTION 

0.5 Meter RET AISG 2.0 Cable Assembly 

1m RET AISG 2.0 Cable Assembly 













27 



Dummy Loads 


- IP65 rated 

- 50 Ohm 

- 2 watt 

- Temperature rated -35ºC ±125°C 

- DC-3GHz frequency range 

DM-2W-D 

NM-2W-D 

DF-CK 


DM-2W-D Din Male 2 Watt Dummy Load 3Ghz 1 

NM-2W-D N Male 2 Watt Dummy Load 3Ghz 1 

DF-CK Din Female Cap Kit, Brass Cap 1 

1/2” PIM Tested RF Jumper 


- Jumper with interface types 7-16 DIN Male and 7-16 DIN Male 

- 3’ to 100’ Lengths 

PART # 

i4-DMDM-3 

i4-DMDM-4 

i4-DMDM-6 

i4-DMDM-8 

i4-DMDM-10 

i4-DMDM-12 

i4-DMDM-20 

DESCRIPTION 

RF Corrugated Copper Jumper DM to DM Pim Tested 3’ Length 








Strut Accessories 

3/8” Galvanized Spring Nut 


- Galvanized Steel construction 

- Spring Coil Individually wrapped in plastic to eliminate damage 


GSN-38 3/8” Galvanized Spring Nut 100 / Pack 

Strut End Caps 


- Compatible with 1-5/8” strut 

- Vinyl plastic composition 

- Safety cap to prevent cuts to installers 

EC-R-100 

EC-W-100 

PART # DESCRIPTION COLOR QUANTITY 

EC-R-100 Strut Ends Caps for 1-5/8” Strut Red 100 / Pack 

EC-W-100 Strut Ends Caps for 1-5/8” Strut White 100 / Pack 

29 

29 Launch 3 Telecom 2015

Grounding 

Pages 30-43 


- UL and CUL listed 

- High conductivity seamless copper construction 

- Tin plated 

- Long barrel 

- CSA certified 

One Hole Lugs. No Inspection Window 

PART # GAUGE STUD SIZE COLOR CODE 

8-14 #8 1/4” Red 

6-14 #6 1/4” Blue 

6-38 #6 3/8” Blue 

2S-38 2 Solid, #3, #4 3/8” Grey 

2-14 #2 1/4” Brown 

2-516 #2 5/16” Brown 

2-38 #2 3/8” Brown 

6-14 2S-38 2-14 



Two Hole Lugs. No Inspection Window 

PART # GAUGE STUD SIZE HOLE SPACING COLOR CODE 

1410-14 #14-#10 1/4” 5/8” (.625) Yellow 

1410-25-1 #14-#10 1/4” 1” Yellow 

1410-38-1 #14-#10 3/8” 1” Yellow 

82-14 #8 1/4” 5/8” (.625) Red 

82-10 #8 #10 5/8” (.625) Red 

62-14 #6 1/4” 5/8” (.625) Blue 

62-25-1 #6 1/4” 1” Blue 

62-38-1 #6 3/8” 1” Blue 

2S2-14 2 Solid, #3, #4 1/4” 5/8” (.625) Grey 

2S2-38-1 2 Solid, #3, #4 3/8” 1” Grey 

62-14 2S2-14 22-38-1 

22-14 #2 1/4” 5/8” (.625) Brown 

22-25-1 #2 1/4” 1” Brown 

22-38-1 #2 3/8” 1” Brown 

(Center to Center) 

Universal Two Hole Lugs. No Inspection Window 


62-38U #6 3/8” Slotted 3/4”-1” Blue 

2S2-38U 2 Solid, #3, #4 3/8” Slotted 3/4”-1” Grey 

22-38U #2 3/8” Slotted 3/4”-1” Brown 


62-38U 2S2-38U 22-38U 

31 



Barrel Splice Lugs 

PART # GAUGE LENGTH COLOR CODE 

8BS #8 2-1/4” Red 

6BS #6 2-1/4” Blue 

2SBS 2 Solid, #3, #4 2-3/8” Grey 

2BS #2 2-1/2”” Brown 

One Hole Lugs. WITH Inspection Window 

PART # GAUGE STUD SIZE COLOR CODE 

i8-14 #8 1/4” Red 

i6-14 #6 1/4” Blue 

i6-38 #6 3/8” Blue 

i2S-38 2 Solid, #3, #4 3/8” Grey 

i2-14 #2 1/4” Brown 

i2-38 #2 3/8” Brown 

i8-14 i6-14 i2S-38 i2-14 



Two Hole Lugs. WITH Inspection Window 


i1410-14 #14-#10 1/4” 5/8” (.625) Yellow 

i1410-25-1 #14-#10 1/4” 1” Yellow 

i1410-38-1 #14-#10 3/8” 1” Yellow 

i82-14 #8 1/4” 5/8” (.625) Red 

i62-14 #6 1/4” 5/8” (.625) Blue 

i62-25-1 #6 1/4” 1” Blue 

i62-38-1 #6 3/8” 1” Blue 

i2S2-14 2 Solid, #3, #4 1/4” 5/8” (.625) Grey 

i2S2-38-1 2 Solid, #3, #4 3/8” 1” Grey 

i22-14 #2 1/4” 5/8” (.625) Brown 

i22-25-1 #2 1/4” 1” Brown 

i22-38-1 #2 3/8” 1” Brown 


i82-14 i62-38 i2S2-38-1 i22-25-1 

33 



Universal Two Hole Lugs. 

WITH Inspection Window 


i62-38U #6 3/8”, Slotted 3/4” - 1” Blue 

i2S2-38U 2 Solid, #3, #4 3/8”, Slotted 3/4” - 1” Grey 

i22-38U #2 3/8”, Slotted 3/4” - 1” Brown 


i62--38U 

i2S2-38U 

i22-25-1 

90º (Right Angle) Lugs 

PART # GAUGE STUD SIZE DESCRIPTION COLOR CODE 

R8-14 #8 1/4” One hole, NO Inspection Window Red 

i6-14R #6 1/4” Two hole, WITH Inspection Window Blue 

i22-14R #2 1/4” Two hole, WITH Inspection Window Brown 

5/8” hole spacing (center to center) 

Ratchet Crimping Tool 


- Color coded rotating die 

- Die includes 5 cavities: #1, #2, 2 solid (includes #3 & # 4), #6 and #8 awg 

PART # 

IL-CRIMPER 

DESCRIPTION 

Hand Ratcheting Tool 



Copper Buss Bars 


- Solid 1/4” thick copper buss bars 

- Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing 

- Custom patterns and hole sizes available 

PART # DESCRIPTION SIZE 

GBU1426 Solid Copper Buss Bar 2”x 6” 








35 



Tinned Copper Buss Bars 


- Solid 1/4” thick copper buss bars 

- Universal hole pattern accepts 2 hole lugs with 3/4” and/or 1” spacing 

- Custom patterns and hole sizes available 

PART # DESCRIPTION SIZE 

GBU1426 -T Tinned Copper Buss Bar 2”x 6” 

GBU14210-T Tinned Copper Buss Bar 2”x 10” 







Universal Ground Bar Hardware Kit 


BB-HK Universal Ground Bar Hardware Kit 1 



IzzyWeld Exothermic Weld Metal 


- UL Listed 


iZ-45 #45 Shots 20 per Case 



iZ-115 # 115 Shots 10 per Case 

37 





- Popular Telecom Molds 

- UL Listed Exothermic System 

WP-2AS-2AS #2 Solid #2 Solid Parallel Connection #65 Shot 

SVES-2AS-1.5-4 #2 Solid 1.5” to 4” Vertical Pipe #45 Shot 

PT 2AS-.25 #2 Solid 0.25” thick copper bar #65 Shot 



SVEU 2AS-1.5-4 #2 Solid Vertical Flat #65 Shot 

WT 2AS-2AS #2 Solid #2 Solid Tee Connection #45 Shot 

SVES 2AS #2 Solid Vertical Flat Steel #45 Shot 

39 





- Popular Telecom Molds 

- UL Listed Exothermic System 

SHEA 2AS #2 Solid Horizontal Flat #45 Shot 

GET 15-2AS #2 Solid 5/8” Ground Rod #90 Shot 

SVED 2AS-1.5-4 #2 Solid #2 Solid Wire Drop to Pipe #65 Shot 



SVED 2AS #2 Solid Vertical Flat #65 Shot 

SVEU 2A-1.5-4 #2 Stranded #2 Wire Up To Pipe #65 Shot 

41 



Handle Clamp 


- Compliant with all molds 

PART # 

HANDLE-TEL 

DESCRIPTION 

Handle Clamp 

Flint Igniter 


- Electrical sleeve 

PART # 

FLINT 

DESCRIPTION 

Flint Igniter 



Mold Scraper 


- Used in removing slag from molds 

PART # 

SCRAPER 

DESCRIPTION 

Mold Scraper 

Mold Brush 


- Used in removing slag from molds 

PART # 

BRUSH 

DESCRIPTION 

Mold Brush 

43 


Safety Products 

Pages 44-58 


WestFall Pro Snatch 

Block 

Product Description 

- Rope capacity: 3/8” or 1/2” wire rope 

- Sheave: 4.5” 

WestFall Pro 3” 

Aluminum Side-Opening 

Hand Line Block 


- 3” Aluminum alloy and magnesium block 

- Lightweight 

- 7/8” Rope capacity 

- 1.000 lbs Safe Working Load 

- Excellent for use with Capstan Winches 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

2000 

3” shackle snatch block, 2 tons safe working load limit 

B1000 

3” aluminum rope block, 1000# WLL 

2005 

4.5” shackle snatch block, 4 tons safe working load limit 

WestFall Pro Hook Snatch 

Block 


- Rope capacity: 3/8” or 1/2” wire rope 

- Sheave: 4.5” 


Aluminum Side-Opening 

Hand Line Block 


- 7/8” rope capacity 

- 2,500 lbs Safe Working Load 

- Made of magnesium and aluminum alloy 

- Light-weight design. Weights 6.3 Lbs 

- Excellent for use with Capstan Winches 

- Loaded Tested prior to shipment 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

2010 

3” hook snatch block, 2 tons safe working load limit 

B2500 

4” aluminum rope block, 2500# WLL 

2015 

4.5” hook snatch block, 4 tons safe working load limit 

WestFall Pro Weld-Lok Reinforced 

Straight Capstan Mount 


- Patent-pending design featuring reinforced Weld-Lok technology 

- Strong, durable, and made for tough jobs 

- Load rated at 1,000 lbs 

- Engineered and manufactured in the U.S. 

Rock Exotica Omni-Block 

Swivel Pulley 


- Weight: 1.9 lbs (850 gm) 

- MBS: 80kN 

- WLL: 20 kN 

- Max Rope Diameter: 0.5” (13 mm) 

- Sheave Diameter: 2.6” (66 mm) 

- Certification: CE pending 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

SM1170 

Weld-Lok straight mount for capstan 

P55 

Rock Exoctica Omni Block 26”W/ 20KN WLL 




Liftex Pro-Edge Premium 

Polyester Endless Web 

Slings 


- 2” Width 

- 1 Ply 

- Rated Capacity: Vertical: 6400 lbs 

Choker: 5000 lbs Basket: 12800 lbs 

Tuf Tug TTMHC-1000 

Load Rated Carabiner 


- 4.1” length 

- 2.2” width 

- .5” gate opening 

- 1,000 lb safe working load limit 

- ASME B30 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

EN1-92P-03 

Pro-Edge Prem. Polyester Endlness Web Sling 3ft 

TTMHC-1000 

1,000 SWL 4-1/10 x 2-1/5 Carabiner 1/2” Gate 

EN1-92P-04 


EN1-92P-06 


EN1-92P-10 


Liftex Green Endless Round Slings 


- Reduce cost with less total rigging weight 

- Easy handling and storage 

- Reduce risk of back and hand injuries 

- Cover abrasion will not reduce capacity 

- Provides a strong grip on loads 

- Provides a tighter choke with an easier release 

- Working Load Limits: Vertical: 5300, Choker: 4200, Basket: 10600 

- .875” Diameter 

- 0.4 lbs/ft 

Tuf Tug TTMHC-1500 



- 4-2/5” length 

- 2-3/5” width 

- 3/4” gate opening 


- ASME B30 

SKU 

TTMHC-1500 

DESCRIPTION 

1,500 SWL 4-2/5 x 2-3/5 Carabiner 3/4” Gate 

SKU 

ENR2-03 

ENR2-04 

ENR2-06 

ENR2-08 

ENR2-10 

DESCRIPTION 

Green Endless Round Sling 3ft 





Tuf Tug TTXLMHC-1500 




- 5.6” width 

- 2.2” gate opening 


- ASME B30 

SKU 

TTXLHC-1500 

DESCRIPTION 

1,500 SWL 8-3/4 x 2-3/5 Carabiner 2-1/5” Gate 

45 




WestFall Pro 4-7/8” x 3” 

Steel Carabiner 1” Gate 


- Auto twist-lock 

- Alloy steel, heat treated 

- 4-7/8” length - 3-1/8” width 

- 1” gate opening - 45 kN MBS (10116 lbs) 

- 3600 lb. (16kN) Gate 

- ANSI Z359.1-2007 compliant 

- 12CTL / 17443 / N-256G 

WestFall Pro 4” x 2” 

Steel Carabiner 1/2” Gate 





- 2.2” width 

-.5” Gate Opening 

- 30 kN MBS (6744 lbs) 

- 3600 lb. (16kN) Gate 


- 12CTLD / 17450 / N-251G 

SKU DESCRIPTION 


7400 4-7/8” x 3” Steel Carabiner with 1” Gate 7410 4” x 2” Steel Carabiner with 1/2” Gate 

WestFall Pro 4-7/8” X 3” 



- Auto twist lock carabiner 

- Heat treated Alloy Steel 

- 4-7/8” length 

- 3” width 

- 1” gate opening 

- 50 kN MBS (11240 lbs) 

- 3600 lb. (16kN) Gate 


- N-248G 

WestFall Pro 7” x 3-3/4” Steel 

Carabiner 1-3/4” Gate 




- 7” length 

- 3-3/4” width 

- 1-3/4” gate opening 

- 35 kN MBS (7868 lbs) 

- 3600 lb. (16kN) Gate 


- 17435 / 2000300 / 71C09A / N-263G 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7401 

4-7/8” x 3 Steel Carabiner 1” Gate 

7420 

7” x 3-3/4” Steel Carabiner with 1-3/4” Gate 

WestFall Pro 4-1/2” x 2-3/4” 

Steel Carabiner 3/4” Gate 




- 4-2/5” length 

- 2-3/5” width 


- 41 kN MBS (9217 lbs) 

- 3600 lb. (16kN) Gate 


- 12CTLM / 17451 / 2000112 / N-252G 

WestFallPro 7” x 3-3/4” Steel 





- 7-1/10” length 

- 3-3/4” width 

- 1-1/5” gate opening 

- 50 kN MBS (11240 lbs) 

- 3600 lb. (16kN) Gate 


- 17460 / 2000113 / N-258G 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7405 

4-1/2” x 2-3/4” Steel Carabiner with 3/4” Gate 

7425 

7” X 3-3/4 Steel Carabiner with 1-1/5” Gate 




WestFall Pro 9” x 5-1/2” Steel 






- 5.6” width 

- 2.2” gate opening 

- 45 kN MBS (10116) 

- 3600 lb. (16kN) Gate 


- 17426 / 04C09B / N-265 

WestFall Pro 4-7/8 x 3” Aluminum 

Carabiner 13/16“ Gate 




- 4-7/8” length 

- 3” width 


- 23 kN MBS (5060) 

- 3600 lb. (16kN) Gate 


SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7430 

7” x 4-1/2” Steel Carabiner with 2-1/4” Gate 

7437 

4-7/8” x 3” Aluminum Carabiner with 13/16” Gate 

WestFall Pro 4-3/4” x 3” Aluminum 

Carabiner 9/10” Gate 



- Aluminum alloy 

- 4-3/4” length 

- 3-1/3” width 


- 25 kN MBS (5620 lbf) 

- 3600 lb. (16kN) Gate 


- 12ATL / 17442 / 2000300 / N-2854G 

WestFall Pro 8-1/2” x 5” 





- 8-1/2” length 

- 5” width 


- 35 kN MBS (7868 lbs) 

- 3600 lb. (16kN) Gate 


- 17420 / 2000114 / 04C09A / N-259G 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7435 

4-3/4” x 3” Aluminum Carabiner with 9/10” Gate 

7440 

8-1/2” x 5” Steel Carabiner with 2” Gate 

WestFall Pro 4-7/8 x 3-1/8” 

Aluminum Carabiner 7/8“ Gate 




- 4-7/8” length 

- 3-1/8” width 


- 30 kN MBS (6744.2683) 

- 3600 lb. (16kN) Gate 


WestFall Pro 4-1/2” x 2-1/2” Stainless 




- Stainless steel construction 

- 4-1/2” length 

- 2-1/2” width 


- 23 kN MBS (5170 lbs) 

- 3600 lb. (16kN) Gate 


- N268G-CPS 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7436 

4-7/8” x 3-1/8” Aluminum Carabiner 7/8” Gate 

7445 

4-1/2” x 2-1/2” Steel Carabiner 1” Gate 

47 





Rebar Hook 2-1/2” Gate 


- Forged steel, heat treated 

- 100% proof loaded @ 3,600 lbs 

- Minimum breaking load: 5,000 lbs 

- ANSI Z359-1 / CSA Z259.12-01 

- 20.6 oz 

- 13218 / N-326 

Westfall Pro 3/4” Gate Snaphook 



- 100% Proof Loaded @ 3600 lb. 16.0 kN 

- Minimum breaking load: 5000 lb. 23 kN 

- ANSI Z359-12-2009 CSA Z259.12 

- EN 362:2004 

- 13.7 oz. / 390 grams 

- Length: 5” 

- Width: 2-1/4” 

- Throat opening: .83” 

- P/N: 7465 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7450 

9” Rebar Hook 2-1/2” Gate 

7465 

3/4” Gate Snaphook 


Swiveling Rebar Hook 


- Swivel Rebar Hook with 3600 lbs 

Gate Strength 


- 100% proof loaded @ 3,600 lbs 

- Minimum breaking load: 5,000 lbs 

- ANSI Z359-1 (07) / CSA Z259.12-01 

- Net Weight: 12 oz. 

- 13329 / N-325 

WestFall Pro 3/4” Gate 

Swiveling Snaphook 


- Length: 7-1/16” 

- Width: 2-1/4” 

- Gate opening: 3/4” 

- Fall Rated 

- 3600 lb. (3.6M) Gate 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7455 

11” Swivel Rebar Hook 

7466 

3/4” Swivel Snaphook 

WestFall Pro 9” X 5” Aluminum 

Carabiner 2” Gate 


- Aluminum auto-twist lock 

- 5/8” x 8-5/8” x 5-1/8” 

- 2” Gate Opening 

- Includes pin 

- 3600 lb. (16kN) Gate 

- Fall rated 


- 17237 / N-2868G-CP 

WestFall Pro Spreader Bar 


- Length: 9-3/4” 

- Width: 2-1/4” 

- Throat opening: 3/4” 

- Fall Rated 

- Materials: Forged Alloy Steel; 

Yellow Zinc Coating 

- Minimum Breaking Load: 5,000 lbs. 

(22.2 kN) 3,600 lbs. (3.6M) Gate Strength 

- Standards: ANSI Z359, CSA Z259.12-01, 

CSA Class I Connector 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

7460 

9” x 5” Aluminum Carabiner 2” Gate 

7475 

Separator Snaphook 




WestFall Pro Tower 

Positioning Kit 


- 2-1/4” Swivel Form Hook 

- 3/4” Separator SnapHook 

- 3/4” Fall Rated Steel Carabiner 

- Fall Rated 

- 3600 Lbs. Gate 

- ANSI Z359 Compliant 

WestFall Pro 62010 Twin 

Leg Shock Absorbing 

Lanyard with Rebar Hooks 


- Length - 6’ 

- Rebar Hooks - 2-1/4” gate opening 

- Sewn on impact indicator 

- Meets ANSI Z359 standards 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

13400 

Postioning Kit 

62010 

Twin leg POY lanyard, steel rebar hooks 

Westfall Pro 5/8” 

Removable Rope Grab 


- Designed to easily move up and down the length of 

vertical rope lifelines providing continuous fall protection. 

- Panic function brakes to lock the rope grab on the lifeline 

in the event of a fall. 

- Polished Stainless Steel 

- Minimum breaking load: 2800 Lbs 13 kn 

- Meets and exceeds all industry standards. 

- ANSI Z359.1 

- EN 353-2, EN 362 

- 20.2 oz / 572 grams 

WestFall Pro Black-Max 

Shock Absorbing Lanyard 


- Length: stretch from 4.5’ to 6’ 

- Rebar Hooks 


SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

6050 

5/8” trailing rope grab 

62021 

Black Max 2-Stage lanyard, steel rebar hooks 

WestFall Pro Rope Grab Assembly 


- 3’ Length 

- 1” Nylon Webbing 

- Clear shock absorbing pack for easy inspection 

- Always ANSI compliant 3,600 lb. 

- 100% of the lanyards meet the ANSI Z359.13-2009 requirements 

WestFall Pro Black-Max 

Shock Absorbing Lanyard 

with Aluminum Rebar Hooks 


- Length: stretch from 4.5’ to 6’ 

- Aluminum rebar hooks 

- Snap hook center 


SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

60601 

5/8” tope grab with 3’ lanyard 

62022 

Black Max 2-Stage lanyard, aluminum rebar hooks 

49 




WestFall Pro Ascend Tower 

Climbing Harness - Steel 


- Sleek red and black webbing with silver stitching 

- Durable front, back and side D-rings for secure 

anchorage 

- Locking quick-connect chest buckle 

- Sewn-in hip pad with removable tool belt 

- Breathable back and shoulder padding for - Tool lanyards and more 

increased comfort 

- Fall indicators for safety 

- Large adjustable seat for easy positioning inspection 

and all day comfort 

- Easily accessible lanyard parks 

- Extra utility attachment loops on seat and - Weight Limit: 310 lbs. 

belt provide secure points for hardware - ANSI Z359.1-2007 

WestFall Pro Ascend Tower 

Climbing Harness - Aluminum 


- Sleek black webbing with silver stitching 

- Lightweight 

- Aluminum front, back, and side d-rings 

- Locking quick-connect chest buckle 

- Sewn-in hip pad with removable tool belt 

- Breathable back and shoulder padding for 

increased comfort 

- Large, adjustable seat for easy positioning 

and all day comfort 

- Extra utility attachment loops on seat and 

belt provide secure points for hardware, 

tool lanyards and more 

- Fall indicators for 

safety inspection 

- Easily accessible 

lanyard parks 

- Weight Limit: 310 lbs. 

- ANSI Z359.1-2007 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

88011 

Steel ascend- S 

88021 

Aluminum ascend- S 

88012 

Steel ascend- M 

88022 

Aluminum ascend- M 

88013 

Steel ascend- L 

88023 

Aluminum ascend- L 

88014 

Steel ascend- XL 

88024 

Aluminum ascend- XL 

WestFall Pro Ascend Welding 

Tower Climbing Harness 


- High-strength Nomex® webbing with 

Kevlar® core yarns. 

- Steel front, back and side D-rings for 

secure attachment. 

- Locking quick-connect chest buckle. 

- Sewn-in hip pad with removable tool belt. 

- Nomex back and shoulder padding for 

increased comfort and protection. 

- Large adjustable seat for easy positioning 

and all-day comfort. 

- Extra utility attachment loops on seat and 

belt provide secure points for hardware, 

tool lanyards and more. 

- Fall indicators for 

safety inspection. 

- Easily accessible lanyard parks. 

- Weight limit: 310 lbs. 

- ANSI Z359.1-2007 

DBI Sala ExoFit Tower Climbing Harness 


- Capacity: 420 lbs. (190 kg) 

- Brand: DBI-SALA® 

- Sub Brand: ExoFit 

- D-Ring Locations: Back Side Front Suspension 

- Body Belt: Yes 

- Leg Strap Buckle Type: Quick Connect 

- Padding Location: Shoulder/Back and Leg, Back/Hip 

- Velocity Ship: Yes 

- iSafe Equipped: Yes 

- Thread/Stitching: Polyester 

- Label: Vinyl 

- Padding: Nylon, Polyester, Aerospace Mesh, EVA Foam 

- Web: Polyester 

- Web Keeper: Nylon, Polyethylene 

- Leg Buckle: Zinc Plated Steel 

- Chest Buckle: Zinc Plated Steel, E-Coat 

- Torso Buckle: Zinc Plated Steel 

- Physical Weight: 9.50 lbs (4.3kg) 

- Product Styles: Vest Style Tower Climbing 

- Product Types: Work Positioning Ladder Climbing Descent Control 

- Standards: OSHA 1910.66, OSHA 1926.502, 

Capital Safety Gen. Mfg. Req., 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

88031 

Kevlar ascend, tower welding harness - S 

1108650 

Exofit Tower Harness - S 

88032 

Kevlar ascend, tower welding harness - M 

1108651 

Exofit Tower Harness - M 

88033 

Kevlar ascend, tower welding harness - L 

1108652 

Exofit Tower Harness - L 

88034 

Kevlar ascend, tower welding harness - XL 

1108657 

Exofit Tower Harness - XL 




DBI Sala ExoFit XP Tower Climbing Harness 




- Sub Brand: ExoFit XP 

- D-Ring Locations: Back Side Front 

- Body Belt: Yes 

- Leg Strap Buckle Type: Quick Connect 

- Padding Location: Shoulder/Back and Leg, Back/Hip 


- iSafe Equipped: Yes 

- Thread/Stitching: Polyester 

- Label: Vinyl 

- Padding: Nylon, Polyester, Aerospace Mesh, EVA Foam 

- Web: Polyester 

- Web Keeper: Nylon, Polyethylene 

- Leg Buckle: Zinc Plated Steel 

- Chest Buckle: Zinc Plated Steel, E-Coat 

- Torso Buckle: Zinc Plated Steel 


- Product Styles: Vest Style Tower Climbing 

- Product Types: Work Positioning Ladder Climbing Descent Control 

- Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., 

ANSI A10.32, ANSI Z359.1, ANSI Z359.3, ANSI Z359.4 

SKU 

1110300 

1110301 

1110302 

1110303 

DESCRIPTION 

Exofit XP Tower Harness - S 

Exofit XP Tower Harness - M 

Exofit XP Tower Harness - L 

Exofit XP Tower Harness - XL 

Kask Super Plasma Safety Helmet 


- Outer shell: ABS plastic. 

- Internal shell: Styrofoam HD. 

- Ventilation - 10 vents. 

- Headband range: PE polythene. 

- Padding: Fully washable. 

- System holder: Clips external Nylon 6.6 

- Size: Universal - Adjustable from 51 to 62 

- Weight: 420 g 

- Certification: ANSI Z89.1-2009 

- Available colors: Black, Blue, Red, White. 

- Made in Italy 

DBI Sala ExoFit NEX 

Tower Climbing Harness 


- Duo-Lok: Lightweight one-handed use w/memory-fit 

- Revolver: Simple and fast adjustment that locks into position 

- Hybrid Comfort Padding: marries premium comfort & durability 

- Tech-Lite Aluminum d-rings: Lightweight alloy adds to comfort 

- Repel Technology Webbing: Provides up to 5 times more 

abrasion resistance and water repellency 

- Integrated Trauma Straps 

- Reflective material: Provides better visibility 

- Impact Indicator Stitches 

- Built in carrying pocket on chest & covered labels 

- Breakaway lanyard keepers 

- Max Capacity 420lbs 

- Harness Weight 9 lbs 

- Meets or exceeds all applicable industry standards 

including OSHA and ANSI including the 

stringent ANSI Z359 

SKU 

1113190 

1113191 

1113192 

1113193 

Petzl Vertex Vent 

Helmet 



- Head circumference min.: 53 cm 

- Head circumference max.: 63 cm 

- Guarantee: 3 years 

- Made in: FR 

SKU 

A10V 

DESCRIPTION 

Petzl Vertex 2 Vent 

Petzl Alveo Vent 

Helmet 


DESCRIPTION 

Exofit NEX Tower Harness - S 

Exofit NEX Tower Harness - M 

Exofit NEX Tower Harness - L 

Exofit NEX Tower Harness - XL 


- Head circumference min.: 53 cm 

- Head circumference max.: 63 cm 

- Guarantee: 3 years 

- Made in: FR 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

WHE00010 

Kask Super Plasma 

A20V 

Petzl Alveo Helmet 

51 




Petzl Grillon Adjustable Positioning Lanyard 


- Lanyard with fine adjustment system for 

precise work positioning 

double mode, on the harness lateral 

attachment points, to distribute the weight 

on the belt (user has weight on his feet): 

length is adjusted by pressing on the 

pivoting cam) 

single mode on the harness ventral 

attachment point, to distribute weight 

between the waistbelt and the leg loops 

(user is suspended): length is adjusted by 

operating the handle while 

holding the free end of the lanyard 

- Removable protective sheath protects the 

rope from abrasive contact and favors 

smooth rope glide. The protection can be 

removed when the single lanyard 

technique is used, to bring the user closer to the anchor. 

- Certification: CE EN 358 & EN 795 C 

DBI Sala Lad-Saf Wire Rope Grab 

with Carabiner 




- Sub Brand: Lad-Saf 


- iSafe Equipped: No 

- Label: Polyester, Stamped 

- Physical Dimensions: 5.50x1.50x5.50 (in) 


- Product Styles: Mobile 

- Product Types: Flexible Cable Ladder Safety 

- Standards: ANSI A14.3-1992, 

Capital Safety Gen. Mfg. Req. 

- Install Type: Temporary 

- Number Of Users: One 

- Structure Type: Straight Ladder 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

L52A002 

2M Petzl Grillon 

6116540 

DBI Lad-Saf 3/8 Wire Rope Grab with Carabiner 

L52A003 

3M Petzl Grillon 

Guardian Cross Arm Strap 


- Twice as durable with dual enforced webbing 

& heavy duty stitching 

- The heavy duty wear pad protects the 

structural webbing against abrasion & snags 

- Large D-ring & standard size D-ring for pass-thru 

Guardian 3 Foot Shock 

Absorbing Lanyard with 

Snap Hooks 


- 3’ Length 

- 1” Nylon Webbing 

- Clear shock absorbing pack for easy inspection 

- Always ANSI compliant 3,600 lb. 

- 100% of the lanyards meet the 

ANSI Z359.13-2009 requirements 


SKU 

10785 Guardian 3’ Premium Cross Arm Strap 

01214 

DESCRIPTION 

Guardian 3’ Shock Lanyard, Snaphook ends 




Supply Heavy Duty Cordura Black 

Top-Closing Canvas Bolt Bag 


- 12” height 

- 9” length 

- 5” width 

- Extra tough Cordura (1000 denier) 

closing top with drawstring 

- Bull-pin loop on each side 

- Inside pocket 

- Tunnel loop belt connection 

- Up to 3” wide belt capacity 

SKU 

GM-5416TCP 

DESCRIPTION 

Supply Canvas Bull-Pin 

and Bolt Bag 


- 10” depth 

- 5” length 

- 9” width 

- Bull-pin loop on each side 

- Tunnel loop belt connection 

- Heavy-duty construction 

- Up to 3” belt capacity 

Extra Tall Top Closing Canvas Bag 

Supply Large Black 

Deluxe Gear Equipment Bag 


- Huge 4.5 Cubic Ft. of Interior Storage 

- ID Card Window on Side Pocket 

- Back panel opens to reveal a mesh vent window 

- 600 Denier - PU Coated, Polyester Duck Fabric 

- Four Outside Pockets 

- Main Compartment: 18” x 17” x 16” 

- Overall Dimensions: 29” x 17” x 16” 

SKU 

GM-3050 

DESCRIPTION 

Large Gearbag 

Jumbo Gear Bag/Backpack, 

Rugged Tactical Polyester 


- Constructed of rugged tactical polyester. 

Key features include: Extra large main 

compartment with 4 interior mesh pockets. 

Concealed shoulder straps for easy 

transition from gear bag to backpack. 2 

end pockets with fitted storm flaps and 

zippered closure. Padded “grip” handle, 2 end 

handles, cinch straps to keep stowed gear intact 

and to prevent zipper failure. 

Size: 35” x 13” x 14” 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

GM-5416T 

Bull-Pin and Bolt Bag, Canvas, Tunnel Loop 

54-691 

Jumbo Patrol Bag. 54.691 Fox Outdoor 

Canvas Utility Bag 

w/ Inside Pocket 


- 9” length 

- 10” width 

- 8”x3” top diameter 

- Inside pocket 

- Leather reinforced bottom 

- Ventilation eyelet in bottom 

- Snap belt connection 

Supply Plastic Bottom 

Canvas Bucket 


- 15” height 

- 12” diameter 

- Made of heavy-duty canvas 

- High-density polyethylene top ring for 

strength and chemical resistance 

- Reinforced high-strength webbing strap 

- Black molded polypropylene bottom 

- Made in the USA 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

GM-5142P 

Large Utility Canvas Pouch with Leather Bottom 

GM-5109S 

Canvas Bucket with black molded bottom 

53 



General PPE and Safety 

Bouton Commander Safety Glasses 

with Gray Lens and Black Frame 


- Lightweight, semi-rimless design offers extensive eye coverage and 

all day comfort 

- Bayonet style temples with non-slip rubber pads provide a secure fit 

- Adjustable rubber nose pads offer a custom, comfortable fit 

- FogLess lens coating to keep your lenses and vision clear 

- Anti-scratch coating 

- 9.5 Base curve lens 

- Meets ANSI Z87.1+ 

- Meets CSA Z94.3 

Bouton Blizzard Safety 

Glasses with Indoor/Outdoor 

Blue Lens and White Frame 


- Lightweight, semi-rimless design 

offers all day comfort 

- Bayonet temples are rubber 

co-molded for a comfortable fit 

- Non-slip rubber nose pads provide a secure fit 

- Anti-Scratch Coating 

- 8 Base curve lens 

- Meets ANSI Z87.1+ 

- Meets CSA Z94.3 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

250-33-0021 

Bouton Optical Commander Gloss Black 

250-48-0226 

Bouton Optical Blizzard White Frame 

Tower Climbing Job Site Safety Banner 


- Quickly and easily display OSHA required safety signs 

- Made of Premium Extra-Heavy Duty UltraFlex 15oz. PVC material, 

capable of withstanding harsh outdoor environments, ensuring a long life 

- Flame Resistant (NFPA701, Title 19, CSFM, ASTM E84, B1) 

- Fade and tear resistant 

- Outstanding scratch resistance 

- Stable down to -20°F 

- Treated for fungus resistance (ASTM G21) 

- Grommets allow for convenient hanging 

- One banner replaces includes (12) safety signs 

Petzl Cordex Lightweight 

Belay and Rappel Gloves 


- Natural, high-quality leather 

- Durable double layer of leather in high-wear areas 

(fingertips, palm, between thumb and index finger) 

- Back made of breathable stretch nylon 

- Neoprene cuff with Velcro® closure 

- Carabiner hole to attach gloves to harness 

- Tan or Black 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

GM-2000 

4’x2’ Tower Job Site Safety Banner 

K52ST 

Petzl Cordex Lightweight Glove - S 

GM-2010 

6’x3’ Tower Job Site Safety Banner 

K52MT 

Petzl Cordex Lightweight Glove - M 

K52LT 

Petzl Cordex Lightweight Glove - L 

K52XLT 

Petzl Cordex Lightweight Glove - XL 



Rescue 

Petzl I’D Large Self-Braking 

Rope Descender 


- Self-braking descender belay device with anti-panic function 

- For descending a rope and for belaying, with an anti-panic function. 

- Anti-error safety catch to reduce the risk of an accident due to incorrect 

installation of the device on the rope. The shape of the cam is designed 

to improve rope glide when ascending. 

- Anti-panic function is engaged if the user pulls too 

strongly on the handle: brakes and stops the 

descent automatically 

- Locking position on the handle for positioning 

while on the rope. 

- Pivoting cam facilitates taking up the slack 

in the rope. Can also be used to make a reversible 

haul system, and for short ascents (in conjunction with 

a FOOTPRO foot loop and an ASCENSION handled 

rope clamp) 

- For ropes between 11.5mm (.45”) and 13mm (.51”) 

in diameter. 

- Lowers heavy loads up to 600 lbs (only for expert users, 

consult the instructions for use of the device) 

D200S0 : CE EN 341 Classe A, NFPA L. 

D200L0 : CE EN 341 Classe A, NFPA G. 

- Weight: 1.2 lbs. 

- Individually tested. 

Petzl I’D Small Self-Braking 

Rope Descender 


- Self-braking descender belay device with anti-panic function 

- For descending a rope and for belaying, with an anti-panic function. 

- Anti-error safety catch to reduce the risk of an accident 

due to incorrect installation of the device on the rope. 

- Anti-panic function: if the user pulls too hard on the handle, 

the cam will lock on the rope. 

- Locking position on the handle 

for positioning while on the rope. 

- When used for hauling, allows the 

system to be reversible. 

- For ropes between 10mm (.39”) and 

11.5mm (.45”) in diameter. 

- Certification: 

D20 S : CE EN 341 Classe A, NFPA L. 

D20 L : CE EN 341 Classe A, NFPA G. 

- Weight: 1.2 lbs. 

- Individually tested. 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

D200L0 

Large, I’D Descender - Petzl 

D200S0 

Small, I’D Descender - Petzl 

Petzl Ascension Handled 

Rope Clamp/Ascender Grab 


- Weight: 7 ounces, 195 g 

- Handles ropes: 8 - 13 mm 

DBI Sala Fisk Descender Device 

w/Instructional DVD Video 


- DBI Sala Fisk Descender is the simplest, most effective 

descent control system ever designed - it’s easy to 

trust a system designed for durability, thermal 

capacity and smooth flow 

- Gentle flow for 19” of working line to pass 

through the descender 

- Large radius for smoother descent 

- Less wear to the working line 

- Reduction in rope hockling and torsional twist 

- Durable 304 stainless steel construction 

- Meets or exceeds all industry requirements including OSHA and ANSI. 

- Use with 1/2” Kernmantle Rope 

SKU 

DESCRIPTION 

SKU 

DESCRIPTION 

B17ARN 

Right, Ascension Lightweight, Black 

2103189 

Fisk Descender 

55 



Rescue 

Supply Deluxe Rescue Kit 


- 300’ x 7/16” Kernmantle Rope With Sewn Eye 

- Supply Rope Bag 

- ISC RP880A D4 Work Rescue Descender 

- PMI Easy Pick Off Strap 

- (4) WestFall Pro 7400 4-7/8”x3” Steel Carabiners 

- DBI Sala 3699953 5’ Tubular Webbing Sling 

- DBI Sala 8701100 Micro Haul Kit: 

2m Working Length 8mm Kernmantle Rope, 

Mini Hand Ascender, Triple Sheave Pulley, 

Triple Sheave Progress Capture Head, 

Screw Gate Carabiner, Quick Link, Kit bag 

SKU 

GM-9050 

DESCRIPTION 

Deluxe Rescue Kit, 300’, 7/16” 

Supply Tower Z Rig Rescue Kit 


- 300’ x 7/16” Kernmantle Rope With Sewn Eye 

Supply Rope Bag ISC RP880 D4 Work Rescue 

Descender PMI Easy Pick Off Strap 

(4) WestFall Pro 7400 4-7/8”x3” Steel Carabiners 

DBI Sala 3699953 5’ Tubular Webbing Sling 

Petzl B17WRA Ascension Rope Clamp 

BlueWater 610117 Micro Pulley 

WestFall Pro 7437 Aluminum 

Carabiner - 4-7/8” x 3” 

SKU 

GM-9027 

DESCRIPTION 

Tower Z Rig Rescue Kit 



Ropes 

Sterling 7/16 Inch 

HTP Static Rope with Eye 


- 100% polyester static 

- Significantly lower elongation is perfect for any haul system 

- Ideal for high traffic expeditions, mountain rescue, military, 

industrial rope access, and swift-water rescue uses 

SKU 

P110000092E 

P100000183E 

P130000092E 

P130000183E 

DESCRIPTION 

7/16” HTP Static White 300’ (92M) Sewn Eye 




Westfall Pro Load Line 


- Unique sheath design gives it superior snag resistance and 

prevents particles and debris from penetrating the rope 

- Terminated ends for easy rigging options 

- Protective sheath increases life of rope 

- High contrast tracers for increased visibility 

SKU 

LL120300 

LL160300 

LL200300 

LL120600 

LL160600 

LL200600 

LL121200 

LL161200 

LL201200 

DESCRIPTION 

3/8” Load Line 300’ MBS: 5000 lbs. 









57 



Tower Tools 

fieldSENSE Occupational RF 

Safety Monitor 


- Compact, durable design intended for everyday use 

- Affordable & competitively priced 

- Indicates RF field strength using bright LED’s 

- Pinpoint and monitor active and idle antennas 

- Loud alarm will warn in case of EMF overexposure danger 

- Uncomplicated, robust and reliable 

- Calibrated to ICNIRP Occupational reference levels 

- Includes storage case and spare batteries 

SKU 

FS-8500 

DESCRIPTION 

FieldSENSE Occupational RF Monitor 


Custom Manufacturing 

Pages 59-61 

Directional Couplers 

MODEL # 

WDC-727-05-NF 

WDC-727-06-NF 

WDC-727-07-NF 

WDC-727-08-NF 

WDC-727-10-NF 

WDC-727-13-NF 

WDC-727-15-NF 

WDC-727-20-NF 

WDC-727-25-NF 

WDC-727-30-NF 

WDC-727-35-NF 

WDC-727-40-NF 

WDC-727-05-DF 

WDC-727-06-DF 

WDC-727-07-DF 

WDC-727-08-DF 

WDC-727-10-DF 

WDC-727-13-DF 

WDC-727-15-DF 

WDC-727-20-DF 

WDC-727-25-DF 

WDC-727-30-DF 

WDC-727-35-DF 

WDC-727-40-DF 

DESCRIPTION 

5 dB Directional Coupler, 698–2700 MHz, 200W, N-F, -150dBc 



8 dB Directional Coupler, 698-2700 MHz, 200W, N-F, -150dBc 

10 dB Directional Coupler 698-2700 MHz, 200W, N-F, -150dBc 





30 dB, Directional Coupler, 698-2700 MHz, 200W, N-F, -150dBc 



5 dB, Directional Coupler, 698–2700 MHz, -150dBc, 500W, 7/16 DIN-F 












ANDREW PART # 

C-5-CPUSE-N 

C-6-CPUSE-N 

C-7-CPUSE-N 

C-8-CPUSE-N 

C-10-CPUSE-N 

C-13-CPUSE-N 

C-15-CPUSE-N 

C-20-CPUSE-N 

C-25-CPUSE-N 

C-30-CPUSE-N 

C-35-CPUSE-N 

C-40-CPUSE-N 

C-5-CPUSE-D 

C-6-CPUSE-D 

C-7-CPUSE-D 

C-8-CPUSE-D 

C-10-CPUSE-D 

C-13-CPUSE-D 

C-15-CPUSE-D 

C-20-CPUSE-D 

C-25-CPUSE-D 

C-30-CPUSE-D 

C-35-CPUSE-D 

C-40-CPUSE-D 

59 



Power Splitter 

MODEL # 

WPS-727-02-NFC-150 

WPS-727-03-NFC-150 

WPS-727-04-NFC-150 

WPS-727-02-DFC-150 

WPS-727-03-DFC-150 

WPS-727-04-DFC-150 

WPS-727-02-NF-150-W 

WPS-727-03-NF-150-W 

WPS-727-04-NF-150-W 

DESCRIPTION 

Two-way Reactive Power Splitter, 698–2700 MHz 

Three-way Reactive Power Splitter, 698–2700 MHz 

Four-way Reactive Power Splitter, 698–2700 MHz 







ANDREW PART # 

S-2-CPUSE-H-N 

S-3-CPUSE-H-N 

S-4-CPUSE-H-N 

S-2-CPUSE-H-D 

S-3-CPUSE-H-D 

S-4-CPUSE-H-D 

S-2-CPUSE-L-Ni 



Hybrid Coupler/Matrix 

MODEL # 

WHC-727-22-NF 

WHC-727-22-DF 

WHC-827-22-NF 

WHC-827-22-DF 

WHC-825-22-NF 

WHC-825-22-DF 

DESCRIPTION 

3 dB Hybrid Coupler/Matrix, 200W, N-F, -150dBc, 698–2700 MHz 

3 dB Hybrid Coupler/Matrix, 500W, DIN-F, -150dBc, 698–2700 MHz 





ANDREW PART # 

H-3-CPUSE-N-A 

H-3-CPUSE-D-A 

N/A 

N/A 

N/A 

N/A 

RF Loads 

MODEL # 

WL-5W-3G-NM 

WL-5W-3G-DM 

WL-10W-3G-NM 

WL-30W-3G-NM 

WL-50W-3G-NM 

WL-100W-3G-NM 

WL-200W-3G-NM 

DESCRIPTION 

RF Load/Termination, 1/2/5W, N-M, DC-3GHz 

RF Load/Termination, 1/2/5W, DIN-M, DC-3GHz 

RF Load/Termination, 10 W, N-M, DC-3GHz 

RF Load/Termination, 25/30 W, N-M, DC-3GHz 




sales@launch3.net | 877.878.9134 



Attenuators 

MODEL # 

WA-1-3G-03-S 

WA-1-3G-06-S 

WA-1-3G-10-S 

WA-1-3G-15-S 

WA-1-3G-20-S 

WA-1-3G-30-S 

WA-5-3G-03-N 

WA-5-3G-06-N 

WA-5-3G-10-N 

WA-5-3G-15-N 

WA-5-3G-20-N 

WA-5-3G-30-N 

WA-10-3G-03-N 

WA-10-3G-06-N 

WA-10-3G-10-N 

WA-10-3G-15-N 

WA-10-3G-20-N 

WA-10-3G-30-N 

WA-30-3G-03-N 

WA-30-3G-06-N 

WA-30-3G-10-N 

WA-30-3G-15-N 

WA-30-3G-20-N 

WA-30-3G-30-N 

WA-50-3G-03-N 

WA-50-3G-06-N 

WA-50-3G-10-N 

WA-50-3G-15-N 

WA-50-3G-25-N 

WA-50-3G-30-N 

WA-100-3G-03-N 

WA-100-3G-06-N 

WA-100-3G-10-N 

WA-100-3G-15-N 

WA-100-3G-20-N 

WA-100-3G-30-N 

WA-200-3G-03-N 

WA-200-3G-06-N 

WA-200-3G-10-N 

WA-200-3G-15-N 

WA-200-3G-20-N 

WA-200-3G-30-N 

DESCRIPTION 

RF Coaxial Fixed Attenuator, 1W, DC-3GHz, 3 dB, SMA (M,F) 






RF Coaxial Fixed Attenuator, 1/2/5 W, DC-3GHz, 3 dB, SMA (M,F) 






RF Coaxial Fixed Attenuator, 10 W, DC-3GHz, 3 dB, N (M,F) 






RF Coaxial Fixed Attenuator, 25/30 W, DC-3GHz, 3 dB, N (M,F) 
























61 


Using GPS technology, the 3Z RF Aligner 

is a complete test solution 

designed to quickly and accurately 

optimize the transmission path 

between two microwave antennas 



Testing Equipment 

3z Telecom 3Z RFA-1000 


3Z Telecom Model - 3ZRFA1000 Rated: 11.1V 

VDC 1800mA Made in USA This tool improves 

network performance for both panel antennas and 

microwave systems. Through GPS technology, it 

has the ability to measure Azimuth, Tilt, Roll and 

AGL measurements. This eliminates the need for a 

compass, GPS, and range finder with one compact 

product. For microwave technology, it has the ability 

to measure the microwave path and microwave 

path target data. For ground inspections, the 3Z 

RF Aligner ensures antennas are meeting target 

specifications. It is built for simple interface and 

lightweight transportation up the tower. 

PART# 

3Z RFA-1000 

DESCRIPTION 

3Z RF Aligner RF Antenna Alignment Tool 

63 



2015 Order Notes 

Use this convenient page to make notes on part and supplies you will need this year. 

PART# 

DESCRIPTION 


27 Daniel Rd 

Fairfield, NJ 07004 

10701 Idaho Ave. 

Hanford, CA 93230 

: 877.878.9134 

: 646.536.3866 

: sales@launch3.net 

● 

Installation 

● 

Repair 

● 

Deinstallation 

● 

Consignment 

● 

PIM and Drive Testing 

● 

Recycling 

● 

Cell Site Maintenance 

● 

Harvesting Networks 

● 

Radio Optimization 

● 

Small Cell Solutions 

● 

Third Party Logistics 

● 

IT Services 

● 

Equipment Purchasing 

● 

Federal Contracting 

● 

Equipment Sales 

● 

Custom Cables 

PRODUCT CATALOG 

2015 

Phone: 877.878.9134 | Fax: 646.536.3866 | Email: sales@launch3.net

Launch 3 Wireless Telecom, Grounding, Safety and Electrical Supplies

Create successful ePaper yourself

Delete template?

Save as template?