Isotemp - Fisher Scientific

Robust Cabinet Design:
Constructed of high-strength
steel with a corrosion-resistant
coating for long-life durability
Cabinet Insulation:
Minimum 5” (127mm) CFC-free,
foamed-in-place insulation for
thermal protection and
structural strength
Stand-Offs:
Prevents freezer from being
placed directly against the wall,
ensuring proper air circulation
to prevent over-heating
Access Port:
1” (25mm) diameter for easy
access through wall
Remote Alarm Contacts:
Allows physical connection
to external alarm/monitoring
system providing alert
capability if samples are
at risk
Heavy-Duty Casters:
2” (51mm) locking, tandem
wheel design for easy,
smooth mobility
Isotemp ® and Isotemp Basic Ultra-Low Temperature Freezers
Safeguard your precious samples with advanced technology and exceptional quality
» Maximum Temperature
Recovery
» Operational Efficiency
» Comfortable Lab
Environment
» Environmentally-Friendly
Features Advantages Benefit
Refrigeration System Maintains cold temperature in the presence of high heat loads Quicker recovery after door openings, ensuring sample protection
Low power consumption Cost-of-ownership is lower; environmentally-friendly
Low Heat Emission Less energy and HVAC equipment required
A quieter freezer allows the unit to be placed directly in the lab
Microprocessor Control Setpoint controls for temperature and alarm system More precise settings and flexiblity for temperature setpoints
On-Board Diagnostics Reports error codes, pointing researcher to a probable cause Diagnose problems faster; lower down-time and sample exposure
Automatic Voltage Buck/ Buck will reduce incoming line voltage in the event voltage
Adds to the longevity of the freezer by stabilizing the voltage to the unit
Boost
is too high
Boost will provide additional voltage to incoming line if voltage
is too low
Optional Integrated
Back-Up
Integrated LN 2 or CO 2 back-up system is programmable at the user
interface
Recessed Power Switch Recessed into the housing to keep the unit from inadvertently
switching off
Reinforced Shelves Stiffeners are added to stainless-steel shelves for excessive loads
and impacts
Door-Mounted Pressure
Equalization Port (PEP)
Model Shown: Isotemp Basic,
17 cu. ft. (489L), Cat. No. IE1786.
Recorder:
Optional, seven-day, 6”
(152mm) circular chart
recorder for validation and
regulatory requirements
Innovative Features and Rewarding Benefits
Door-mounted PEP does not take up valuable storage space or
require maintenance
Secure Inner Doors:
Five inner doors
reduce air loss
during door opening
Outer Door Gasket:
Triple-point gasket
protects against
heat leaks and
minimizes frost
build-up
Stainless-Steel Interior Shelves:
Reinforced shelves, designed for
excessive loads and impacts
Power Management System:
Low voltage surge protection,
voltage buck/boost capabilities.
Eye-level on Isotemp; knee-level
on Isotemp Basic
Assurance that samples will not be compromised if power outage occurs
Controls down time due to accidentally switching off power supply
Store high-load and non-standard samples such as microplate hotels
Periodic ice removal from PEP isn’t required
Isotemp and Isotemp Basic ultra-low temperature
freezers combine the highest reliability
and superior performance with cost-effective
operation and innovative features. These freezers
feature an advanced technology platform,
refrigeration, microprocessor controls and
high-quality construction, delivering:
Quality, Reliable Construction
Delivering the highest quality you can expect,
Isotemp freezers feature robust, high-quality
construction with foam insulation,
flexible storage and precision controls.