Integrating Novell eDirectory with FreeRADIUS

Novell Confidential Manual (ENU) 21 December 2004
Attribute Name Description Values
radiusFramedAppleTalkNetw
ork
Contains the AppleTalk Network number
which the NAS should probe to allocate
an AppleTalk node for the user.
radiusFramedAppleTalkZone
radiusFramedCompression
radiusFramedIPAddress
radiusFramedIPNetmask
radiusFramedIPXNetwork
radiusFramedMTU
radiusFramedProtocol
radiusFramedRoute
radiusFramedRouting
radiusIdleTimeout
radiusLoginIPHost
Specifies the AppleTalk Default Zone to
be used for this user.
Defines a compression protocol to be
used for the link.
Defines an address to be configured for
the user.
Defines an IP netmask to be configured
for the user.
Defines an PX Network number to be
configured for the user.
Specifies the Maximum Transmission
Unit to be configured for the user.
Indicates the framing to be used for
framed access.
Contains a multivalued attribute for
routing information to be configured for
the user on the NAS.
Specifies the routing method for the user,
when the user is a router to a network.
Sets the maximum number of
consecutive seconds of idle connection
allowed to the user before termination of
the session or prompt.
Decides on the system with which to
connect the user.
0=None
1=VJ TCP/IP header compression [10]
2=IPX header compression
3=Stac-LZS compression
IP address.
IP address.
1=PPP
2=SLIP
3=AppleTalk Remote Access Protocol
(ARAP)
4=Gandalf proprietary SingleLink/
MultiLink protocol
5=Xylogics proprietary IPX/SLIP
6=X.75 Synchronous
0=None
1=Send routing packets
2=Listen for routing packets
3=Send and Listen
34