DESIGO building automation system

Automation stations - modular series PXC..D
The modular series PXC..D automation stations with its free I/O configuration and
DIN compliant construction are optimized for panel assembly. It primarily controls
and monitors larger items of plant. The flexible TX-I/O modular product range for
signaling, measuring, metering, switching and positioning can be seamlessly
connect to the automation station.
The I/O modules with local manual controls on the module housing provide the
plant operator with simple manual operation of the plant directly in the control
panel. This local manual control is automatically transmitted as a remote/local
signal to the automation station and associated operator units. In an emergency,
they operate independently of the automation station, providing stand-alone
emergency operation.
PXC100/200..D modular automation station with connected TX-IO modules
Automation station overview
Connection of TX – I/O modules via island bus
up to 200 data points More than 200 data points
BACnet/LonTalk PXC100.D PXC200.D
BACnet/IP PXC100-E.D PXC200-E.D
The LonWorks system controller for this series allows you to connect LonWorks
devices such as DESIGO RXC room controllers and third-party devices.
Overview of system controllers LonWorks
PXC00.D System controller with BACnet/LonTalk communication
PXC00-E.D System controller with BACnet/IP communcation
The PXC..D modular series is supplemented with option and expansion modules.
Plug-in option module PXA40-…
for automation stations
Side-connection expansion module
PXX-L.. for system controller
The option module for automation stations assume additional functions such as
PX-WEB or remote management together with DESIGO INSIGHT.
31 / 64
Siemens DESIGO Building automation and control system CM110660en_03
Building Technologies
System description