PXA30-K11 Extension module for KNX / EIB - Siemens

Commissioning
For integration operation the corresponding firmware must be loaded into the PXC...-U
automation station.
Disposal
The device includes electrical and electronic components and must not be disposed of
as domestic waste.
Current local legislation must be observed.
Technical data
Elements of the user interface Service pin
Programming mode
KNX / EIB interface
Stranded or solid conductors,
2 x 1.0 mm 2
KNX / EIB bus Interface type KNX / EIB (electrically isolated)
Transceiver
TP-UART
Bus current
5 mA
Baud rate
9.6 kbit/s
Bus topology, bus termination
Refer to KNX / EIB manual
Service interface
RJ45
Housing
Protection standard to EN 60529 IP 30
protection standard
Protection class Insulation protection class II
Ambient conditions Normal operation Class 3K5 to IEC 721
Temperature 0 ... 50 °C
Humidity
< 85 % rh
Transport Class 2K3 to IEC 721
Temperature – 25 ... 65 °C
Humidity
< 95 % rh
Industry standards
Product safety
Automatic electronic controls for
household and similar use EN 60730-1
Special requirements for energy controllers EN 60730-2-11
Electromagnetic compatibility
Interference immunity
EN 61000-6-2 (Industry)
Emitted interference
EN 61000-6-3 (Residential)
Meets the requirements for CE marking:
EMC Directive
2004/108/EG
Dimensions
See “Dimensions”
Weight Excluding packaging 75 g
With packaging
95 g
Siemens PXA30-K11 – Extension module for KNX / EIB CM1N9280en_02
Building Technologies 18 May 2009
3/4