TUAREG 92 4x4 EVO APACHE 92 4x4 EVO - Oleo-Mac
TUAREG 92 4x4 EVO APACHE 92 4x4 EVO - Oleo-Mac
TUAREG 92 4x4 EVO APACHE 92 4x4 EVO - Oleo-Mac
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.3.14 OVERVIEW OF THE TIGHTENING TORQUE OF BOLT CONNECTIONS<br />
Steering:<br />
M14 nut of steering segment<br />
M14 nuts of the angle pins on the steering<br />
Securing of pins on the front axle SC 2x4<br />
Engine:<br />
Bolt of the electromagnetic clutch<br />
Mowing:<br />
M10 nut of the tensioning mowing pulley<br />
M20 nut of the blade holder<br />
M16 nut securing the blades to the blade holder<br />
M12x30 bolt on the mowing pulley<br />
Driving controls:<br />
M10 nut on the drive pulley SC 2x4<br />
M10 nut on the drive pulley SC <strong>4x4</strong><br />
Torque<br />
<strong>92</strong> - 132 Nm<br />
60 - 83 Nm<br />
40 - 50 Nm<br />
60 - 70 Nm<br />
33 - 48 Nm<br />
250 - 300 Nm<br />
150 - 200 Nm<br />
60 - 80 Nm<br />
24 - 30 Nm<br />
35 - 45 Nm<br />
When lock nuts are removed and then returned they need to be replaced with new<br />
ones.<br />
6.4 LUBRICATION<br />
Lubricate the machine according to the following lubrication diagram.<br />
Ball bearings of the tension pulleys, guide pulleys and bearings on the mowing deck are self-lubricating.<br />
Before putting the machine out of service for an extended period, thoroughly lubricate all places shown<br />
on the diagram. Namely the half axle of the front and rear axle (it is necessary to remove the rear<br />
wheels).<br />
Symbol<br />
Explanation<br />
Plastic lubricant<br />
6.4<br />
Oil SAE 30<br />
Interval in hours<br />
Plastic lubricant is used to lubricate:<br />
steering segment - using a lubricating nipple<br />
wheel turning pin - using lubricating nipples<br />
mowing deck lifting arms - using a lubricating nipple<br />
tensioning pulley - remove, lubricate<br />
central front axle pivot pin - using a lubricating nipple (model AC <strong>92</strong>-23 <strong>4x4</strong> is equipped with selflubricating<br />
sliding sleeves)<br />
angle joints connecting the steering draw bars - remove, lubricate<br />
front wheel half-axles – on AC <strong>92</strong>-23 <strong>4x4</strong> mower, the interval is 10 hours!<br />
Pivot points are lubricated with oil:<br />
differential lock pedal<br />
brake pedal<br />
travel levers<br />
rear wheel half axles - the interval is 10 hours<br />
40
Change language