Millennium L110 Instructions - Millennium Tree Stands

Figure 7
Step 7: Now bolt the vertical supports to the platform using two 1 ¾” bolts, four washers and two nuts.
Both verticals must be put into position at the same time. Washers go under the head of each bolt and
under the nut. See ( figure 7.)
Figure 8
Step 8: Install the shooting rail onto the uprights using two 2 ¾” bolts, 6 washers and 2 nuts. Place a
washer under the head of bolt, between shooting rail and upright and under nut, as seen in figure 8.