INSTRUCTION MANUAL

More documents

Recommendations

Info

CAMERA FEATURES & OPTIONS CAMERA IS READY TO USE - STANDBY MODE When the camera is powered on, the LCD menu screen will automatically turn on. If menu is left inactive (no settings changed or button pushed) for 10 seconds, menu screen will start counting down from 15 seconds until it reaches Standby Mode. After the 15 second countdown, the camera is active standby mode and ready to record media according to your switch settings. The camera and LCD menu screen can be awakened by pressing the POWER button. NOTE: The POWER button only responds when the green LED light next to the Power button in not illuminated and ‘PIC’ is not displayed on the screen – both of these indicate the camera is busy saving media to the SD Memory card and the camera cannot be awakened from Standby Mode until this process is complete. AUTO CAMERA SENSITIVITY (PIR Sensing) This camera is equipped with auto-adjusting Passive Infrared (PIR) Sensor. There is no need to worry about adjusting any settings for different climates or situations PIR SENSOR 7
STATUS INDICATION LIGHTS RED LIGHT *** (on front of camera) Lights up when the camera detects motion. After you close camera door and are standing in front of the camera, visibility of this light is indication that your camera is ON and working. TIP: Walk in front of the camera and look for the red light to illuminate when you are detected. You can do this to verify your camera is pointing in the correct direction. **NEVER COVER THE RED LED LIGHT. This LED LIGHT also doubles as the camera’s light sensor, which determines day or night operation. GREEN LIGHT (next to PWR button inside camera) Lights up when the camera is capturing and recording media on the SD Memory Card. Also, the LCD screen will show ‘PIC’ during this process. NOTE: Do not remove SD Memory Card when the green light is illuminated or blinking – this could cause you to lose all data on memory card! NOTE: The LCD menu will not wake up from Power Saving Mode while the Green Status Light is illuminated/ LCD reads ‘PIC’. Wait until after Green Light turns off and then press the POWER BUTTON to wake up the LCD screen. NUMBER OF FILES STORED ON SD CARD The initial main LCD screen displays number of files ‘0000’ stored on the SD Memory Card and the battery life. For example, ‘0015’ would indicate that any combination of ‘fifteen’ photos, videos and/or time lapse videos are stored in the memory. 8
Page 1 and 2: PHOTO MODES Photo INSTRUCTION MANUA
Page 3 and 4: INTRODUCTION Thank you for choosing
Page 5 and 6: TABLE OF CONTENTS BEFORE OPERATION
Page 7 and 8: SELECT SD CARD SIZE These charts al
Page 9 and 10: SWITCH SETTINGS [MODE, SETTINGS & D
Page 11: SWITCH SETTINGS [MODE, SETTINGS & D
Page 15 and 16: VIEWING/RETRIEVING MEDIA Explore th
Page 17 and 18: IMAGE STAMP Burst Number Temp Time
Page 19 and 20: Vendor Model #/Style # 63011 63021
Page 21 and 22: Blurry Images Primos ® takes pride
Page 23 and 24: RECOMMENDED ACCESSORIES Universal C
Page 25 and 26: FCC STATEMENT This equipment has be

INSTRUCTION MANUAL

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?