RUGER SR-SERIES
SR-Series Pistol Instruction Manual - Amazon Web Services
SR-Series Pistol Instruction Manual - Amazon Web Services
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TO REASSEMBLE<br />
1. Be certain the chamber and magazine are empty. Always keep the pistol<br />
pointed in a safe direction.<br />
2. With the slide held<br />
upside down,<br />
replace the barrel<br />
and push it<br />
rearward into its<br />
locked position.<br />
(See Figure 23.)<br />
1<br />
2<br />
Figure 23<br />
3. Place the recoil<br />
spring assembly<br />
into position.<br />
Make sure that the<br />
plastic end of the<br />
recoil spring goes<br />
into the slide. (See<br />
Figure 24.)<br />
Figure 24<br />
Ejector Down<br />
Figure 25<br />
4. Be certain that ejector is<br />
pulled down and locked in<br />
its lower (forward)<br />
position. Push the trigger<br />
into its fully forward<br />
position. (See Figure 25.)<br />
1<br />
2<br />
28
Change language